Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this jOint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 40 (thesis year 1995) a total of 10,746 thesis titles from 19 Canadian and 144 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 40 reports theses submitted in 1995, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Handbook of Thermoplastics written by Olagoke Olabisi and published by CRC Press. This book was released on 1997-03-19 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers coverage of all known commodity, transitional, engineering, high-temperature and high-performance thermoplastics, and analyzes emerging developments in the creation of new thermoplastics. The text examines: important issues in the field for each substance discussed, including history, development and commercialization; polymer formation mechanisms and process technologies; the affect of structural and phase characteristics on properties; the commercial relevance of thermoplastic blends, alloys, copolymers and composites; and more.
Download or read book High performance Sustainable Materials and Structures written by Prince Lazar and published by Springer Nature. This book was released on with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polyolefin Blends written by Domasius Nwabunma and published by John Wiley & Sons. This book was released on 2008-01-02 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference on the properties and applications of polyolefin blends Polyolefins account for more than half of total plastics consumption in the world. In recent years, usage of and research on polyolefin blends have increased significantly due to new applications in medicine, packaging, and other fields and the development of novel polyolefins. With a special emphasis on nano- and micro-structures of crystals and phase morphology, Polyolefin Blends condenses and consolidates current information on polyolefins so that the reader can compare, select, and integrate a material solution. Focusing exclusively on the fundamental aspects as well as applications of polyolefin blends, this authoritative reference: * Features an introductory chapter that serves as a guide to polyolefin blends * Includes chapters covering formulation design, processing, characterization, modeling and simulation, engineering performance properties, and applications * Covers polyolefin/polyolefin blends and polyolefin/non-polyolefin blends * Discusses miscibility, phase behavior, functionalization, compatibilization, microstructure, crystallization, hierarchical morphology, and physical and mechanical properties * Covers new research trends including in-situ reactor blending and reactive processing, such as compatibilization/functionalization in the melt * Contains practical examples from open literature sources and commercial products With chapters contributed by leading experts from several countries, this is a must-have reference for scientists and engineers conducting research on polyolefin blends and for professionals in medical, packaging, and other commodity fields. It is also an excellent text for graduate students studying polymer science and polymer processing.
Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.
Download or read book Maro Polymer Notes written by and published by . This book was released on 1999 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Blends and Composites written by Muralisrinivasan Natamai Subramanian and published by John Wiley & Sons. This book was released on 2017-03-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because it is critically important to manufacture quality products, a reasonable balance must be drawn between control requirements and parameters for improved processing method with respect to plastics additives. An important contribution to the commercial polymer industry, Polymer Blends and Composites is one of the first books to combine plastics additives, testing, and quality control. The book is a comprehensive treatise on properties that provides detailed guidelines for selecting and using blends and composites for applications. A valuable resource for operators, processors, engineers, chemists, the book serves to stimulate those already active in natural polymer composites.
Download or read book Encyclopedia of Polymer Blends Volume 3 written by Avraam I. Isayev and published by John Wiley & Sons. This book was released on 2016-06-07 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete and timely overview of the topic, this Encyclopedia imparts knowledge of fundamental principles and their applications for academicians, scientists and researchers, while informing engineers, industrialists and entrepreneurs of the current state of the technology and its utilization. The most comprehensive source on polymer blends available on the market Offers a complete and timely overview of the topic Each article presents up to date research & development on a topic and its basic principles and applications, integrates case studies, laboratory and pilot plant experiments, and gives due reference to published and patented literature Equips academics, scientists and researchers with knowledge of fundamentals principles and their applications, and informs the engineers, industrialists and entrepreneurs about the state of the art technology and its applications
Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
Download or read book Advances in Thermoplastic Elastomers written by Nikhil K. Singha and published by Elsevier. This book was released on 2024-01-24 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Thermoplastic Elastomers: Challenges and Opportunities brings together the state-of-the-art in thermoplastic elastomers (TPEs), covering innovative materials, synthesis techniques, processing methods and sustainability. Sections outline thermoplastic elastomers, rubber elastic, and thermoplastic vulcanizates, and review the current landscape, from research and published literature, to commercialization and patents. Subsequent chapters offer methodical coverage of different categories of advanced thermoplastic elastomer materials, including areas such as polyolefin-based TPEs and high performance TPEs. The final chapters in the book examine options for sustainability, including bio-based, bio-resourced, and biodegradable TPEs, as well as circular economy and recycling of TPEs.Finally, outlook and future market and research trends are reviewed. This is a valuable book for researchers and advanced students working with elastomers, polymer science, materials chemistry, and materials engineering. In an industrial setting, this is an essential resource for R&D professionals, scientists, and engineers looking to utilize thermoplastic elastomers in a range of advanced applications. - Focuses on novel materials, such as polyolefin-based TPEs, fluorinated TPEs, silicone-based TPEs, and ionic TPEs - Discusses sustainability in terms of bio-based or biocompatible TPEs, recycling and the circular economy - Helps bridge the gap between research and commercialization, reviewing patents, literature, trends, and market.
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1994-02 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Commercial Polymer Blends written by L.A. Utracki and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in depth and unparalleled presentation of the compositions of virtually all polymer blends.
Download or read book Conference Proceedings written by Society of Plastics Engineers. Technical Conference and published by . This book was released on 1996 with total page 1122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of High Energy Radiations written by Subhendu Ray Chowdhury and published by Springer Nature. This book was released on 2023-05-14 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the applications of high-energy beam radiation for synthesis and processing of polymeric materials. It addresses fundamental nature of high energy i.e., ionizing radiations and interaction with monomers and polymers leading to a wide variety of products such as tyres, textiles, shape memory polymers, polymers for aviation and space applications, polymeric biomaterials and natural rubber latex. It discusses general principles and techniques of preparation of polymeric materials including polymer blends, composites and nanocomposites. It also includes the topic of radiation-assisted recycling of polymers through breaking of covalent bonds. This book will be useful for students, researchers and professionals in the areas of polymers science and technology, radiation technology, electron beam technology, gamma radiation technology, advanced materials technology, biomaterials technology, nanotechnology, membrane science technology and environmental science.
Download or read book Journal of Polymer Engineering written by and published by . This book was released on 2001 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro and Nanostructured Multiphase Polymer Blend Systems written by Charef Harrats and published by CRC Press. This book was released on 2005-09-29 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces focuses on the formation of phase morphology in polymer blends and copolymers and considers various types of blends including thermosets, thermoplastics, thermoplastic vulcanizates, and structured copolymers. The book carefully debates the processing
Download or read book Compatibilization of Polymer Blends written by Ajitha A. R and published by Elsevier. This book was released on 2019-10-10 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compatibilization of Polymer Blends: Micro and Nano Scale Phase Morphologies, Interphase Characterization and Properties offers a comprehensive approach to the use of compatibilizers in polymer blends, examining both fundamental and advanced knowledge in the field. The book begins by introducing polymer blends, describing thermodynamics, miscibility, and phase separation, and explaining the main concepts of compatibilization. Other sections cover theoretical approaches for nearly compatible blends, incompatible blends, nanofillers, physical compatibilization, reactive compatibilization, morphological and structural characterization, and physico-mechanical characterization. Finally, key application areas are covered, including biomedical applications, packaging and automobile engineering. While this book will be a highly valuable reference source for academics, researchers and postgraduate students interested in polymer blends, it will also be ideal for anyone involved in the fields of polymer science, polymer chemistry, polymer physics, materials science, scientists, R&D professionals, and engineers in involved in the development or engineering of polymer products. - Offers detailed and systematic coverage of essential and advanced topics relating to the compatibilization of polymer blends - Presents a critical analysis of the effect of compatibilization on morphology and thermal, mechanical, electrical and viscoelastic properties of polymer blends - Draws on novel studies and state-of-the-art research, discussing the latest issues and developments
