Download or read book Wood Properties and Processing written by Miha Humar and published by MDPI. This book was released on 2020-05-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.
Download or read book Timber written by H E Desch and published by CRC Press. This book was released on 1996-06-13 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: For nearly 60 years, Timber: Structure, Properties, Conversion, and Use has been the authoritative text on timber technology. Now in its seventh edition, this book remains a vital resource, providing accurate, comprehensive, and fact-driven information for students and professionals in the field. From basic coverage of timber structure, properties, processing, and utilization, to more in-depth scientific investigations, this book covers all the issues and topics of concern to readers with a wide range of levels of sophistication. Timber technology has not stood still since the last revision; Timber: Structure, Properties, Conversion, and Use has kept the pace, exploring such high-tech topics as computer-aided wood identification and log conversion, radio frequency drying of wood, enhancement of wood with plastics, application of preservatives with high-pressure vacuum systems, and the development and application of flame-retardant solutions. Other timely updates include enlarging the chapter on mechanical performance to cover elastic behavior, toughness, and the use of structural-sized timber for strength tests. The chapter on board materials has also been extensively updated and enlarged to include information on new boards and structural composites that have emerged since the last edition. One of the most important strengths of Timber: Structure, Properties, Conversion, and Use is its versatility as a reference for timber professionals while remaining approachable to students in the field. Evidence of the book?s comprehensiveness and versatility becomes clear as it teaches readers about such wide-ranging topics as: identification and nomenclature of timbers variability in cellular features between species principal chemical constituents in timber structural variability caused by natural defects such as bark pockets, resin streaks, and brittleheart determination of density and moisture content in timber thermal and acoustic properties of wood conversion equipment such as circular saws, band saws, frame saws, and chipper canters health and safety issues in the industry adhesives, metal connectors, and joint design forest and millyard pests application of preservatives and finishes From basic identification and timber nomenclature to methods of sap displacement and tests of electrical conductivity, Timber: Structure, Properties, Conversion, and Use covers it all. And while it is no longer possible for any one individual to write authoritatively on every aspect of timber technology, embracing as it does structure, properties, conversion, utilization, and behavior in service, J. M. Dinwoodie has gathered expert opinions and expanded on original author H. E. Desch?s approach and vision to continue to provide the authoritative text on timber technology.
Download or read book Structure and Properties of Wood Polymer Composites WPC written by Alexander Askadskii and published by Cambridge Scholars Publishing. This book was released on 2019-03-05 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, the use of polymer composites filled with wood (WPC) is becoming increasingly popular. In particular, flooring of terraced premises, siding, decorative fences, fence systems, steps, universal profiles, among others are made from WPC. In 1977, the first enterprise for the production of WPC appeared in Sweden. The first experience was not very successful – the demand turned out to be low, and the wear of technological equipment was very high. Therefore, developments in this field were resumed only in the 1990s and continue to this day. This book describes the basic physical and mechanical properties of modern WPC, such as tensile and compression strength, and hardness. Also, the influence of climatic factors on the performance properties of products from WPC is described, while the thermal and rheological properties of WPC materials are considered, which directly affect the consumer characteristics of the products. The book contains theoretical developments related to the prediction of the mechanical and thermal properties of polymers and composites. The Van der Waals volume and the energy of the intermolecular interaction are estimated. This book will be of interest to representatives of the WPC market, designers, and architects, as well as technology engineers, students and post-graduate students of higher educational institutions in the fields of chemistry and physics of composite polymer materials.
Download or read book Wood Structure and Properties 02 written by Stanislav Kurjatko and published by Arbora Publishers. This book was released on 2002 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Characteristics written by Christoph Richter and published by Springer. This book was released on 2014-11-10 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a broad range of options for technically adapting, handling and processing wood with specific wood characteristics. It starts by discussing wood anatomy and the general factors leading to the formation of wood characteristics. The individual characteristics are then categorized into four groups: 1. Wood characteristics inherent in a tree’s natural growth. 2. Biotically-induced wood characteristics. 3. Abiotically-induced wood characteristics. 4. Types and causes of cracks. New to this English edition is a comparison of wood characteristics found in trees from the boreal, temperate and tropical climate zones. The results show a clear relationship between the effects of sunshine duration, the vertical and horizontal angle of radiation, and crown coverage and the way wood characteristics form. The book addresses all those who work with wood professionally: foresters, gardeners and arborists who want to be able to observe a living tree and identify its internal features and the causes of its prominent wood characteristics. Based on the findings described in this book they can determine how to avoid certain undesirable characteristics, or alternatively how to promote favorable ones as the tree and stand grow. Botanists and dendrologists will learn how wood characteristics arise, and how they affect living trees and wood products. The needs of wood technologists seeking to prevent adverse wood characteristics from influencing wood processing, or to enhance favorable wood characteristics, are also addressed.
Download or read book Archaeological Wood written by Roger M. Rowell and published by . This book was released on 1990 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining chemistry with techniques of preserving archaeological wood, these 17 essays are based on current understanding of the structure of wood and the mechanisms of its degradation. Topics include the chemical composition of wood and changes brought about by the decay process, biopredators, curing and preservation techniques, museum environments, and the ethics of conservation. For conservators and wood-oriented scientists. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Structural Design in Wood written by Judith Stalnaker and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The prime purpose of this book is to serve as a design is of considerable value in helping the classroom text for the engineering or architec student make the transition from the often sim ture student. It will, however, also be useful to plistic classroom exercises to problems of the designers who are already familiar with design real world. Problems for solution by the student in other materials (steel, concrete, masonry) but follow the same idea. The first problems in each need to strengthen, refresh, or update their capa subject are the usual textbook-type problems, bility to do structural design in wood. Design but in most chapters these are followed by prob principles for various structural materials are lems requiring the student to make structural similar, but there are significant differences. planning decisions as well. The student may be This book shows what they are. required, given a load source, to find the magni The book has features that the authors believe tude of the applied loads and decide upon a set it apart from other books on wood structural grade of wood. Given a floor plan, the student design. One of these is an abundance of solved may be required to determine a layout of struc examples. Another is its treatment of loads. This tural members. The authors have used most of book will show how actual member loads are the problems in their classes, so the problems computed. The authors have found that students, have been tested.
Download or read book Wood Deterioration Protection and Maintenance written by Ladislav Reinprecht and published by John Wiley & Sons. This book was released on 2016-07-27 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood Deterioration, Protection and Maintenance provides an up to date discussion of the natural durability of wood, wood degradation processes, and methods of structural and chemical protection of wood. Modern active substances in wood preservatives and the relationships between preservative properties, the anatomical structure and moisture content of wood and protective processes involving pressure and/or diffusion driving forces are fully illustrated.
Download or read book Handbook of Wood Chemistry and Wood Composites written by Roger M. Rowell and published by CRC Press. This book was released on 2005-02-18 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The degradable nature of high-performance, wood-based materials is an attractive advantage when considering environmental factors such as sustainability, recycling, and energy/resource conservation. The Handbook of Wood Chemistry and Wood Composites provides an excellent guide to the latest concepts and technologies in wood chemistry and bio-based composites. The book analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood, emphasizing the mechanisms of reaction involved and resulting changes in performance properties. These include modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating over 30 years of teaching experience, the esteemed editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.
Download or read book Materials and Joints in Timber Structures written by Simon Aicher and published by Springer Science & Business Media. This book was released on 2013-09-25 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam
Download or read book Wood Structure and Composition written by Menachem Lewin and published by CRC Press. This book was released on 1991-08-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressed to the general professional chemist at a level between the undergraduate and the specialist in the field, presents such aspects of modern wood chemistry as anatomy, analysis, the composite nature and chemical composition of wood, and the structure and properties of cellulose, lignin, hemic
Download or read book Textbook of Wood Technology Structure identification uses and properties of the commercial woods of the United States and Canada written by Alexis John Panshin and published by . This book was released on 1970 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Composites written by Martin P Ansell and published by Woodhead Publishing. This book was released on 2015-07-24 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent progress in enhancing and refining the performance and properties of wood composites by chemical and thermal modification and the application of smart multi-functional coatings have made them a particular area of interest for researchers. Wood Composites comprehensively reviews the whole field of wood composites, with particular focus on their materials, applications and engineering and scientific advances, including solutions inspired biomimetrically by the structure of wood and wood composites. Part One covers the materials used for wood composites and examines wood microstructure, and wood processing and adhesives for wood composites. Part Two explores the many applications of wood composites, for example plywood, fibreboard, chipboard, glulam, cross-laminated timber, I-beams and wood-polymer composites. The final part investigates advances in wood composites and looks at the preservation and modification of wood composites, environmental impacts and legislative obligations, nano-coatings and plasma treatment, biomimetic composite materials, the integration of wood composites with other materials and carbonized and mineralized wood composites. - Comprehensively reviews the entire field of wood composites in a single volume - Examines recent progress in enhancing and refining the performance and properties of wood composites by chemical and thermal modification and the application of smart multi-functional coatings - Explores the range of wood composites, including both new and traditional products
Download or read book Wood Structure and Properties 10 written by Rastislav Lagaňa and published by Arbora Publishers. This book was released on 2010 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Timber Bridges written by Michael A. Ritter and published by Datamotion Publishing LLC. This book was released on 1990 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a comprehensive analysis of the design, construction, inspection, and maintenance of timber bridges.
Download or read book Dielectric Properties of Wood and Wood Based Materials written by Grigoriy I. Torgovnikov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provided here is a comprehensive treatise on all aspects of dielectric properties of wood and wood products. The topics covered include: Interaction between electromagnetic field and wood. - Wood composition and dielectric properties of its components. - Measurement of dielectric parameters of wood.- Dielectric properties of oven-dry wood. - Dielectric properties of moist wood. - Effect of different kinds of treatment on dielectric properties of wood. - Dielectric properties of bark. - Dielectric properties of wood-based materials. - Recommendations for determination of dielectric parameters of wood based materials and for their use in calculations. Several appendices comprise reference data onthe dielectric characteristics of wood and wood-based materials in the wide range of frequencies, temperatures, and moisture content.
Download or read book Primary Wood Processing written by John C.F. Walker and published by Springer Science & Business Media. This book was released on 2006-09-13 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily a general text covering the whole sweep of the forest industries. The over-riding emphasis is on a clear, simple interpretation of the underlying science, demonstrating how such principles apply to processing operations. The book considers the broad question "what is wood?" by looking at the biology, chemistry and physics of wood structure. Wood quality is examined, and explanations are offered on how and why wood quality varies and the implications for processing. Finally, various "industrial processes" are reviewed and interpreted. All chapters have been written by specialists, but the presentation targets a generalist audience.
