Download or read book Structure and Properties of Polymer Films written by R. Lenz and published by . This book was released on 1973-01-01 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure and Properties of Polymer Films written by R. Lenz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of the relationship between the structure, morphology and properties of polymer films has significantly progressed in recent years through the use of a number of phyiscal techniques - some new and some old. These methods include small and large angle x-ray diffraction, bire fringence, light scattering, infrared dichroism, fluorescence polarization, light and electron microscopy and interferrometry. This collection of papers, most of which were presented at a symposium at the Boston American Chemical Society Meeting in April, 1972, represent a collection of recent studies using many of these methods by some of the leading scientists in their fields. It is evident that these various techniques permit the study of various aspects of film structure such as crystal structure and orientation, amorphous orientation, the interrelation of crystalline and amorphous regions in lamellar, fibrillar, and spherulitic superstructure and the relationshi. p of these structural variables to the mechanical and optical properties of the films. Film structure is sufficiently complex that a complete understanding of the relationship between structure and properties will come from the employment of a combination of several of these methods. vii CONTENTS Optical Studies of the Morphology of Polymer Films ••• • • 1 Richard S. Stein Light Scattering by Oriented Native Cellulose Systems 25 R. H. Marchessault Superstructure in Films of Bio and Biorelated Small Angle Polymers as Noted by 39 Light Scattering • • Garth L.
Download or read book STRUCTURE AND PROPERTIES OF POLYMER FILMS written by ED LENZ and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing and Novel Applications of Multilayer Polymer Films written by Deepak Langhe and published by William Andrew. This book was released on 2016-01-04 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Novel Applications of Multilayer Polymer Films discusses the advancements in multilayer technology, including its capability to produce hundreds of layers in a single film by a melt coextrusion process. These engineered films can have significantly enhanced performance properties, allowing films to be made thinner, stronger, and with better sealing properties. As recent developments in feedblocks and materials have opened up a range of new possibilities, this book discusses different feedblocks, and viscosity and material considerations. It is the first comprehensive summary of the latest technology in multilayer film processing and related applications, and is written from a practical perspective, translating research into commercial production and real world products. The book provides fundamental knowledge on microlayer coextrusion processing technology, how to fabricate such structures, structure and properties of such microlayers, and potential applications, thus helping research scientists and engineers develop products which not only fulfill their primary function, but can also be manufactured reliably, safely, and economically. Provides a fundamental knowledge of microlayer coextrusion processing, including how to fabricate microlayer structures, the properties of microlayers, and potential applications, including optics, polymer film capacitors, and semiconductors Includes an in-depth analysis of all technologies used for producing multilayered films and structures by coextrusion processing Thoroughly assesses potential future trends in multilayer coextrusion technology, thus enabling engineers and scientists to stay ahead of the curve in this rapidly advancing area
Download or read book Structure and properties of polymer films written by Robert W. Lenz and published by . This book was released on 1973 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure Property Relationships in Polymers written by Charles E. Carraher Jr. and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first concern of scientists who are interested in synthetic polymers has always been, and still is: How are they synthesized? But right after this comes the question: What have I made, and for what is it good? This leads to the important topic of the structure-property relations to which this book is devoted. Polymers are very large and very complicated systems; their character ization has to begin with the chemical composition, configuration, and con formation of the individual molecule. The first chapter is devoted to this broad objective. The immediate physical consequences, discussed in the second chapter, form the basis for the physical nature of polymers: the supermolecular interactions and arrangements of the individual macromolecules. The third chapter deals with the important question: How are these chemical and physical structures experimentally determined? The existing methods for polymer characterization are enumerated and discussed in this chapter. The following chapters go into more detail. For most applications-textiles, films, molded or extruded objects of all kinds-the mechanical and the thermal behaviors of polymers are of pre ponderant importance, followed by optical and electric properties. Chapters 4 through 9 describe how such properties are rooted in and dependent on the chemical structure. More-detailed considerations are given to certain particularly important and critical properties such as the solubility and permeability of polymeric systems. Macromolecules are not always the final goal of the chemist-they may act as intermediates, reactants, or catalysts. This topic is presented in Chapters 10 and 11.
Download or read book Processing Structure Properties Relationships in Polymers written by Roberto Pantani and published by MDPI. This book was released on 2019-12-05 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of research and review papers is aimed at depicting the state of the art on the possible correlations between processing variables, obtained structure and special properties which this structure induces on the plastic part. The extraordinary capacity of plastics to modify their properties according to a particular structure is evidenced for several transformation processes and for many applications. The final common goal is to take profit of this peculiar capacity of plastics by inducing, through a suitable processing, a specific spatial organization.
Download or read book Polymer Structure Properties and Applications written by Rudolph D. Deanin and published by . This book was released on 1972 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure and Properties of Oriented Polymers written by I. Ward and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give the reader an up to date viewofthe present position. The individual chapters are for the most part self contained, and cover a very wide range of topics. It is intended that each of them should serve the dual purpose of an expository introduction to the subject and a topical review of recent research. It is inevitable that there will be differences of style and approach in the contributions from the different authors. No atternpt has been made to moderate these differences, as they serve to illustrate the diversity of approaches required to give the reader a balanced view of the subject. I should like to thank the contributors for their endeavours, and especially for their patience in accepting modifications and corrections which make for consistency in the book as a whole. 1 am particularly indebted to Professor Leslie Holliday who originally approached me with the proposition that such a book would be a worthwhile venture and to the publishers who have given me every assistance in making its progress as painless as possible.
Download or read book Plasma Polymer Films written by Hynek Biederman and published by World Scientific. This book was released on 2004 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymer Films examines the current status of the deposition and characterization of fluorocarbon-, hydrocarbon- and silicon-containing plasma polymer films and nanocomposites, with plasma polymer matrix. It introduces plasma polymerization process diagnostics such as optical emission spectroscopy (OES, AOES), and describes special deposition techniques such as atmospheric pressure glow discharge. Important issues for applications such as degradation and stability are treated in detail, and structural characterization, basic electrical and optical properties and biomedical applications are discussed.
Download or read book Polymer Thin Films written by Ophelia Kwan Chui Tsui and published by World Scientific. This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ch. 1. Block copolymer thin films / J.-Y. Wang, S. Park and T. P. Russell -- ch. 2. Equilibration of block copolymer films on chemically patterned surfaces / G. S. W. Craig, H. Kang and P. F. Nealey -- ch. 3. Structure formation and evolution in confined cylinder-forming block copolymers / G. J. A. Sevink and J. G. E. M. Fraaije -- ch. 4. Block copolymer lithography for magnetic device fabrication / J. Y. Cheng and C. A. Ross -- ch. 5. Hierarchical structuring of polymer nanoparticles by self-organization / M. Shimomura ... [et al.] -- ch. 6. Wrinkling polymers for surface structure control and functionality / E. P. Chan and A. J. Crosby -- ch. 7. Crystallization in polymer thin films: morphology and growth / R. M. Van Horn and S. Z. D. Cheng -- ch. 8. Friction at soft polymer surface / M. K. Chaudhury, K. Vorvolakos and D. Malotky -- ch. 9. Relationship between molecular architecture, large-strain mechanical response and adhesive performance of model, block copolymer-based pressure sensitive adhesives / C. Creton and K. R. Shull -- ch. 10. Stability and dewetting of thin liquid films / K. Jacobs, R. Seemann and S. Herminghaus -- ch. 11. Anomalous dynamics of polymer Films / O. K. C. Tsui.
Download or read book Process Structure Properties in Polymer Additive Manufacturing written by Swee Leong Sing and published by MDPI. This book was released on 2021-09-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is an exciting field and has great potential in transformative and translational research in many fields, such as biomedical, aerospace, and even electronics. Current methods for polymer AM include material extrusion, material jetting, vat polymerisation, and powder bed fusion. With the promise of more applications, detailed understanding of AM—from the processability of the feedstock to the relationship between the process–structure–properties of AM parts—has become more critical. More research work is needed in material development to widen the choice of materials for polymer additive manufacturing. Modelling and simulations of the process will allow the prediction of microstructures and mechanical properties of the fabricated parts while complementing the understanding of the physical phenomena that occurs during the AM processes. In this book, state-of-the-art reviews and current research are collated, which focus on the process–structure–properties relationships in polymer additive manufacturing.
Download or read book Functional Polymer Films 2 Volume Set written by Wolfgang Knoll and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 1107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very thin film materials have emerged as a highly interesting and useful quasi 2D-state functionality. They have given rise to numerous applications ranging from protective and smart coatings to electronics, sensors and display technology as well as serving biological, analytical and medical purposes. The tailoring of polymer film properties and functions has become a major research field. As opposed to the traditional treatise on polymer and resin-based coatings, this one-stop reference is the first to give readers a comprehensive view of the latest macromolecular and supramolecular film-based nanotechnology. Bringing together all the important facets and state-of-the-art research, the two well-structured volumes cover film assembly and depostion, functionality and patterning, and analysis and characterization. The result is an in-depth understanding of the phenomena, ordering, scale effects, fabrication, and analysis of polymer ultrathin films. This book will be a valuable addition for Materials Scientists, Polymer Chemists, Surface Scientists, Bioengineers, Coatings Specialists, Chemical Engineers, and Scientists working in this important research field and industry.
Download or read book Properties of Polymers written by D.W. van Krevelen and published by Elsevier. This book was released on 2012-12-02 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of Polymers: Their Correlation with Chemical Structure; Their Numerical Estimation and Prediction from Additive Group Contributions summarizes the latest developments regarding polymers, their properties in relation to chemical structure, and methods for estimating and predicting numerical properties from chemical structure. In particular, it examines polymer electrical properties, magnetic properties, and mechanical properties, as well as their crystallization and environmental behavior and failure. The rheological properties of polymer melts and polymer solutions are also considered. Organized into seven parts encompassing 27 chapters, this book begins with an overview of polymer science and engineering, including the typology of polymers and their properties. It then turns to a discussion of thermophysical properties, from transition temperatures to volumetric and calorimetric properties, along with the cohesive aspects and conformation statistics. It also introduces the reader to the behavior of polymers in electromagnetic and mechanical fields of force. The book covers the quantities that influence the transport of heat, momentum, and matter, particularly heat conductivity, viscosity, and diffusivity; properties that control the chemical stability and breakdown of polymers; and polymer properties as an integral concept, with emphasis on processing and product properties. Readers will find tables that give valuable (numerical) data on polymers and include a survey of the group contributions (increments) of almost every additive function considered. This book is a valuable resource for anyone working on practical problems in the field of polymers, including organic chemists, chemical engineers, polymer processers, polymer technologists, and both graduate and PhD students.
Download or read book Structure Property Relationships of Polymeric Solids written by Anne Hiltner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a collection of original research papers which were presented in honor of the Bordon Award recipient, Professor Eric Baer, on the occasion of the 55th Meeting of the American Chemical Society (Atlanta, Georgia, March, 1981). The contributors are present or former colleagues and students who have worked with him in the Department of Macromolecular Science at Case Institute of Technology of Case Western Reserve University. Throughout his work, Eric Baer has attempted to find the relation ships of solid state structure and hierarchy to the resultant pro perties from which specific functions are derived. Although he has studied many seemingly unrelated subjects, from irreversible de formation, mechanics and yield processes in amorphous polymeric solids to structural organization and mechanical function of ten don, his unique goal has been to develop models from the real structure that would allow a quantitative description of properties. Today, this area of "microscience" is rapidly expanding as new and sophisticated applications of polymeric materials with multifunc tional properties are emerging from our understanding and control of the solid state. The wide-ranging ideas and the original ity of Professor Baer's contributions have stimulated many new concepts which are now widely accepted in the field of high polymers. The contributions to this volume represent many of the areas which he has explored.
Download or read book Film Properties of Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2012-04-25 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface -- 1. Introduction to Plastics and Polymers -- 2. Chapter 2 - Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers -- 3. Production of films -- 4. Markets and Applications for films -- 5. Styrenic Plastics -- 6. Polyesters -- 8. Polyamides (Nylons) -- 9. Polyolefins -- 10. Polyvinyls & Acrylics -- 11. Fluoropolymers -- 12. High Temperature/High Performance Polymers -- 13. Elastomers and rubbers -- 14. Renewable Resource or biodegradable polymers -- Appendices -- Permeation Unit Conversion Factors -- Vapor Transmission rate Conversion factors.
Download or read book Carbon Nanomaterial Filled Polymer Composites for Functional Applications Processing Structure and Property Relationship written by Dong Xiang and published by Frontiers Media SA. This book was released on 2022-03-11 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
