Download or read book Structure and Properties of Glassy Polymers written by Martin R. Tant and published by . This book was released on 1998 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: In twenty-nine chapters by leading authorities, Structure and Properties of Glassy Polymers provides readers with comprehensive coverage of basic and applied research on glass polymers as well as a wealth of information on current topics such as molecular modeling, characterization, polymer glasses in confined spaces, and conducting glass polymers. The characterization techniques presented include temperature-modulated differential scanning calorimetry, dielectric loss spectroscopy, photochemical hole burning, positron annihilation lifetime spectroscopy, and transient current generation.
Download or read book The Physics of Glassy Polymers written by R. N. Haward and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work sets out to provide an up-to-date account of the physical properties and structure of polymers in the glassy state. Properties measured above the glass transition temperature are therefore included only in so far as is necessary for the treatment of the glass transition process. This approach to the subject therefore excludes any detailed account of rubber elasticity or melt rheology or of the structure and conformation of the long chain molecule in solution, although knowledge derived from this field is assumed where required. Major emphasis is placed on structural and mechanical properties, although a number of other physical properties are included. Naturally the different authors contributing to the book write mainly from their own particular points of view and where there are several widely accepted theoretical approaches to a subject, these are sometimes provided in different chapters which will necessarily overlap to a significant extent. For example, the main theoretical presentation on the subject of glass transition is given in Chapter 1. This is supplemented by accounts of the free volume theory in Chapter 3 and in the Introduction, and a short account of the work of Gibbs and DiMarzio, also in Chapter 3. Similarly, there is material on solvent cracking in Chapters 7 and 9, though the two workers approach the subject from opposite directions. Every effort has therefore been made to encourage cross-referencing between different chapters.
Download or read book The Physics of Glassy Polymers written by R. N. Haward and published by Springer. This book was released on 2011-12-09 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work sets out to provide an up-to-date account of the physical properties and structure of polymers in the glassy state. Properties measured above the glass transition temperature are therefore included only in so far as is necessary for the treatment of the glass transition process. This approach to the subject therefore excludes any detailed account of rubber elasticity or melt rheology or of the structure and conformation of the long chain molecule in solution, although knowledge derived from this field is assumed where required. Major emphasis is placed on structural and mechanical properties, although a number of other physical properties are included. Naturally the different authors contributing to the book write mainly from their own particular points of view and where there are several widely accepted theoretical approaches to a subject, these are sometimes provided in different chapters which will necessarily overlap to a significant extent. For example, the main theoretical presentation on the subject of glass transition is given in Chapter 1. This is supplemented by accounts of the free volume theory in Chapter 3 and in the Introduction, and a short account of the work of Gibbs and DiMarzio, also in Chapter 3. Similarly, there is material on solvent cracking in Chapters 7 and 9, though the two workers approach the subject from opposite directions. Every effort has therefore been made to encourage cross-referencing between different chapters.
Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.
Download or read book Polymers written by Carole A. Daniels and published by CRC Press. This book was released on 1989-11-20 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise, illustrated presentation of polymer structure and bonding. The well constructed organization and index make the book readily usable as a reference book. Those who read the entire text will be well rewarded with a solid understanding of the fundamentals of polymer properties and possible applications. This book will most certainly remain a valuable reference for years to come.
Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.
Download or read book Encyclopedia of Membranes written by Enrico Drioli and published by Springer. This book was released on 2016-07-14 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A landmark work covering the major aspects of the science, technology and application of membrane operations and related fields, from basic phenomena to the most advanced applications and future perspectives. Over 1500 concise entries in an A-Z format cover a vibrant field with a multitude of applications in diverse disciplines such as biotechnology, medicine, agro-food and petrochemical industries, environmental protection, as well as drinking water supply. Coverage includes membrane reactors and catalytic design (catalytic membrane reactors). Practically all unit operations of process engineering can be redesigned as membrane unit operations (e. g. membrane distillation, membrane crystallization, membrane stripping, membrane scrubbing). Entries are provided by an international team of experts from academia, research institutions as well as from industry.
Download or read book The Physics of Glassy Polymers written by R.N. Haward and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition of The Physics of Glassy Polymers there have been substantial developments in both the theory and application of polymer physics, and many new materials have been introduced. Furthermore, in this large and growing field of knowledge, glassy polymers are of particular interest because of their homogeneous structure, which is fundamentally simpler than that of crystalline or reinforced materials. This new edition covers all these developments, including the emergence of the polymer molecule with its multiplicity of structure and conformations as the major factor controlling the properties of glassy polymers, using the combined knowledge of a distinguished team of contributors. With an introductory chapter covering the established science in the subject are and summarising concepts assumed in the later chapters, this fully revised and updated second edition is an essential work of reference for those involved in the field.
Download or read book Structure and Properties of Oriented Polymers written by I. Ward and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give the reader an up to date viewofthe present position. The individual chapters are for the most part self contained, and cover a very wide range of topics. It is intended that each of them should serve the dual purpose of an expository introduction to the subject and a topical review of recent research. It is inevitable that there will be differences of style and approach in the contributions from the different authors. No atternpt has been made to moderate these differences, as they serve to illustrate the diversity of approaches required to give the reader a balanced view of the subject. I should like to thank the contributors for their endeavours, and especially for their patience in accepting modifications and corrections which make for consistency in the book as a whole. 1 am particularly indebted to Professor Leslie Holliday who originally approached me with the proposition that such a book would be a worthwhile venture and to the publishers who have given me every assistance in making its progress as painless as possible.
Download or read book Polymers and Their Properties Fundamentals of structure and mechanics written by J. W. S. Hearle and published by Ellis Horwood. This book was released on 1982 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grady, a transgendered high school student, yearns for acceptance by his classmates and family as he struggles to adjust to his new identity as a male.
Download or read book Structure and Properties of Amorphous Polymers written by Alan G. Walton and published by Elsevier Science & Technology. This book was released on 1980 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure Property Relationships in Polymers written by Charles E. Carraher Jr. and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first concern of scientists who are interested in synthetic polymers has always been, and still is: How are they synthesized? But right after this comes the question: What have I made, and for what is it good? This leads to the important topic of the structure-property relations to which this book is devoted. Polymers are very large and very complicated systems; their character ization has to begin with the chemical composition, configuration, and con formation of the individual molecule. The first chapter is devoted to this broad objective. The immediate physical consequences, discussed in the second chapter, form the basis for the physical nature of polymers: the supermolecular interactions and arrangements of the individual macromolecules. The third chapter deals with the important question: How are these chemical and physical structures experimentally determined? The existing methods for polymer characterization are enumerated and discussed in this chapter. The following chapters go into more detail. For most applications-textiles, films, molded or extruded objects of all kinds-the mechanical and the thermal behaviors of polymers are of pre ponderant importance, followed by optical and electric properties. Chapters 4 through 9 describe how such properties are rooted in and dependent on the chemical structure. More-detailed considerations are given to certain particularly important and critical properties such as the solubility and permeability of polymeric systems. Macromolecules are not always the final goal of the chemist-they may act as intermediates, reactants, or catalysts. This topic is presented in Chapters 10 and 11.
Download or read book Polymer Structure Properties and Applications written by Rudolph D. Deanin and published by . This book was released on 1972 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Thin Films written by Ophelia Kwan Chui Tsui and published by World Scientific. This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ch. 1. Block copolymer thin films / J.-Y. Wang, S. Park and T. P. Russell -- ch. 2. Equilibration of block copolymer films on chemically patterned surfaces / G. S. W. Craig, H. Kang and P. F. Nealey -- ch. 3. Structure formation and evolution in confined cylinder-forming block copolymers / G. J. A. Sevink and J. G. E. M. Fraaije -- ch. 4. Block copolymer lithography for magnetic device fabrication / J. Y. Cheng and C. A. Ross -- ch. 5. Hierarchical structuring of polymer nanoparticles by self-organization / M. Shimomura ... [et al.] -- ch. 6. Wrinkling polymers for surface structure control and functionality / E. P. Chan and A. J. Crosby -- ch. 7. Crystallization in polymer thin films: morphology and growth / R. M. Van Horn and S. Z. D. Cheng -- ch. 8. Friction at soft polymer surface / M. K. Chaudhury, K. Vorvolakos and D. Malotky -- ch. 9. Relationship between molecular architecture, large-strain mechanical response and adhesive performance of model, block copolymer-based pressure sensitive adhesives / C. Creton and K. R. Shull -- ch. 10. Stability and dewetting of thin liquid films / K. Jacobs, R. Seemann and S. Herminghaus -- ch. 11. Anomalous dynamics of polymer Films / O. K. C. Tsui.
Download or read book Mechanical Properties of Solid Polymers written by Ian M. Ward and published by John Wiley & Sons. This book was released on 2012-10-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an updated and comprehensive account of the propertiesof solid polymers, the book covers all aspects of mechanicalbehaviour. This includes finite elastic behavior, linearviscoelasticity and mechanical relaxations, mechanical anisotropy,non-linear viscoelasicity, yield behavior and fracture. New to thisedition is coverage of polymer nanocomposites, and molecularinterpretations of yield, e.g. Bowden, Young, and Argon. The book begins by focusing on the structure of polymers,including their chemical composition and physical structure. It goes on to discuss the mechanical properties and behaviour ofpolymers, the statistical molecular theories of the rubber-likestate and describes aspects of linear viscoelastic behaviour, itsmeasurement, and experimental studies. Later chapters cover composites and experimental behaviour,relaxation transitions, stress and yielding. The book concludeswith a discussion of breaking phenomena.
Download or read book Properties and Applications of Amorphous Materials written by M.F. Thorpe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this NATO ASI has been to present an up-to-date overview of current areas of interest in amorphous materials, with particular emphasis on electronic properties and device applications. In order to limit the material to a manageable amount, the meeting was concerned almost exclusively with semiconducting materials. This volume should be regarded as a follow-on to the NATO ASI held in Sozopol, Bulgaria in 1996 and published as "Amorphous Insulators and Semiconductors" edited by M.F. Thorpe and M.1. Mitkova (Kluwer Academic Publishers, NATO ASI series, 3 High Technology - Vol. 23). The lectures and seminars fill the gap between graduate courses and research seminars. The lecturers and seminar speakers were chosen as experts in their respective areas, and the lectures and seminars that were given are presented in this volume. During the first week of the meeting, an emphasis was placed on introductory lectures while the second week focused more on research seminars. There were two very good poster sessions that generated a lot of discussion, but these are not reproduced in this volume as the editors wanted to have only larger contributions to make the proceedings more coherent.
Download or read book Polymer Structure Characterization written by Richard A Pethrick and published by Royal Society of Chemistry. This book was released on 2015-10-20 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The different physical properties displayed by low molar mass organic materials and polymers are a result of their molecular organisation. In order to understand the structure – property relationship of a material it is necessary to first look at the interactions at a molecular level. This new edition of Polymer Structure Characterization provides readers with the background needed to understand the factors that influence molecular organization and how this affects the morphology and bulk physical properties of a material. In order to introduce the concepts, the book first looks at small molecular systems and builds up to complex macromolecular systems. The second edition has been fully revised and updated to include new examples and references. Topics covered include: organic crystals, liquid crystals, plastic crystals, polymer crystal growth, amorphous glassy materials, polymer surfaces and interfaces, colloids and molecular organization in liquids as well as two new chapters on self-assembly and biopolymer systems. The book is intended to provide complimentary material for a range of undergraduate and postgraduate courses in materials science, molecular chemistry and chemical physics. In addition to polymer and material scientists, the book would also be of interest to chemists and physicists studying the properties of organic materials.
