Download or read book Identification Methods for Structural Health Monitoring written by Eleni Chatzi and published by Springer. This book was released on 2016-05-25 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume provide an introduction to well known and established system identification methods for structural health monitoring and to more advanced, state-of-the-art tools, able to tackle the challenges associated with actual implementation. Starting with an overview on fundamental methods, introductory concepts are provided on the general framework of time and frequency domain, parametric and non-parametric methods, input-output or output only techniques. Cutting edge tools are introduced including, nonlinear system identification methods; Bayesian tools; and advanced modal identification techniques (such as the Kalman and particle filters, the fast Bayesian FFT method). Advanced computational tools for uncertainty quantification are discussed to provide a link between monitoring and structural integrity assessment. In addition, full scale applications and field deployments that illustrate the workings and effectiveness of the introduced monitoring schemes are demonstrated.
Download or read book System Identification for Structural Health Monitoring written by Izuru Takewaki and published by WIT Press. This book was released on 2012 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: System identification (SI) techniques are important in reducing gaps between the constructed structural systems and their structural design models and in health monitoring for damage detection. Modal-parameter SI and physical-parameter SI are two major branches in SI.Special character of this book: (1) The physical-parameter SI method explained in this book requires only two accelerometers for measurement of records. Furthermore only a simple manipulation of Fourier transformation is required.(2) The stiffness and damping can be identified simultaneously.(3) The modal parameter SI can supplement or support the result by the physical-parameter SI method.(4) In place of usual low-pass or high-pass filter techniques, a novel noise-bias compensation method is explained. Because the noise itself is not known in many cases, the identification and elimination of noise is a tough problem.(5) A new technique of system identification is explained in the case where an inner vibration source exists.(6) The accuracy of the explained SI methods is examined by the actual recorded data.(7) MATLAB codes are available.This book is intended for Structural Engineers, Mechanical Engineers, Researchers, Graduate and undergraduate students.
Download or read book STRUCTURAL SYSTEM IDENTIFICATION AND HEALTH MONITORING written by ELENI N.. DERTIMANIS CHATZI (VASILIS.) and published by . This book was released on 2023 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural System Identification written by Eleni N. Chatzi and published by CRC Press. This book was released on 2018-12-15 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our built infrastructure comprises an evolving organism, which requires monitoring and diagnostics throughout its service life in order to ensure a reliable and safe operation. To this end, Structural Identification (St-Id) exploits sensory feedback in order to reveal an abundance of information on the system throughout its life-cycle. The decoding of this information into an adequate representation of the system, may in turn serve as a tool for life-cycle assessment, maintenance planning and early prognosis and warning. This graduate level textbook and professional guide provides both an overview of well-established structural identification methods, as well as an introduction to selected advanced state-of-the-art tools, which are particularly suited for implementation in a practical setting. Both parametric and non-parametric methods are discussed, formulated in the time or frequency domain. The challenging issues of state and parameter identification are addressed. Moreover, special topics pertaining to nonlinear and non-stationarity behavior are further visited. The presented methods are demonstrated using MATLAB, with sample code provided for the featured examples.
Download or read book Structural Health Monitoring written by Charles R. Farrar and published by John Wiley & Sons. This book was released on 2012-11-19 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by global leaders and pioneers in the field, this book is a must-have read for researchers, practicing engineers and university faculty working in SHM. Structural Health Monitoring: A Machine Learning Perspective is the first comprehensive book on the general problem of structural health monitoring. The authors, renowned experts in the field, consider structural health monitoring in a new manner by casting the problem in the context of a machine learning/statistical pattern recognition paradigm, first explaining the paradigm in general terms then explaining the process in detail with further insight provided via numerical and experimental studies of laboratory test specimens and in-situ structures. This paradigm provides a comprehensive framework for developing SHM solutions. Structural Health Monitoring: A Machine Learning Perspective makes extensive use of the authors’ detailed surveys of the technical literature, the experience they have gained from teaching numerous courses on this subject, and the results of performing numerous analytical and experimental structural health monitoring studies. Considers structural health monitoring in a new manner by casting the problem in the context of a machine learning/statistical pattern recognition paradigm Emphasises an integrated approach to the development of structural health monitoring solutions by coupling the measurement hardware portion of the problem directly with the data interrogation algorithms Benefits from extensive use of the authors’ detailed surveys of 800 papers in the technical literature and the experience they have gained from teaching numerous short courses on this subject.
Download or read book Structural Health Monitoring Damage Detection Volume 7 written by Christopher Niezrecki and published by Springer. This book was released on 2017-03-20 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring & Damage Detection, Volume 7: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics, 2017, the seventh volume of ten from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Health Monitoring & Damage Detection, including papers on: Structural Health Monitoring Damage Detection System Identification Active Controls
Download or read book The 4th International Workshop on Structural Control written by Andrew Smyth and published by DEStech Publications, Inc. This book was released on 2005 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the research and applications on sensing technologies to monitor and control the structure and health of buildings, bridges, installations, and other constructed facilities.
Download or read book Applications of Nonlinear System Identification to Structural Health Monitoring written by and published by . This book was released on 2004 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of implementing a damage detection strategy for aerospace, civil and mechanical engineering infrastructure is referred to as structural health monitoring (SHM). In many cases damage causes a structure that initially behaves in a predominantly linear manner to exhibit nonlinear response when subject to its operating environment. The formation of cracks that subsequently open and close under operating loads is an example of such damage. The damage detection process can be significantly enhanced if one takes advantage of these nonlinear effects when extracting damage-sensitive features from measured data. This paper will provide an overview of nonlinear system identification techniques that are used for the feature extraction process. Specifically, three general approaches that apply nonlinear system identification techniques to the damage detection process are discussed. The first two approaches attempt to quantify the deviation of the system from its initial linear characteristics that is a direct result of damage. The third approach is to extract features from the data that are directly related to the specific nonlinearity associated with the damaged condition. To conclude this discussion, a summary of outstanding issues associated with the application of nonlinear system identification techniques to the SHM problem is presented.
Download or read book Health Monitoring of Structural Materials and Components written by Douglas Adams and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first complete introduction to health monitoring, encapsulating both technical information and practical case studies spanning the breadth of the subject. Written by a highly-respected figure in structural health monitoring, this book provides readers with the technical skills and practical understanding required to solve new problems encountered in the emerging field of health monitoring. The book presents a suite of methods and applications in loads identification (usage monitoring), in-situ damage identification (diagnostics), and damage and performance prediction (prognostics). Concepts in modelling, measurements, and data analysis are applied through real-world case studies to identify loading, assess damage, and predict the performance of structural components, as well as examine engine components, automotive accessories, aircraft parts, spacecraft components, civil structures and defence system components. In particular the book: provides the reader with a fundamental and practical understanding of the material; discusses models demonstrating the physical basis for health monitoring techniques; gives a detailed review of the best practices in dynamic measurements including sensing; presents numerous data analysis techniques using model- and signal-based methods; discusses case studies involving real-world applications of health monitoring; offers end-of-chapter problems to enhance the study of the topic for students and instructors; and includes an accompanying website with MATLAB programs providing hands-on training to readers for writing health monitoring model simulation and data analysis algorithms. Health Monitoring of Structural Materials and Components is an excellent introductory text for newcomers to the subject as well as an excellent study tool for students and lecturers. Practitioners and researchers, those with a greater understanding and application of the technical skills involved, will also find this essential reading as a reference text to address current and future challenges in this field. The wide variety of case studies will appeal to a broad spectrum of engineers in the aerospace, civil, mechanical, machinery and defence communities.
Download or read book Structural Health Monitoring written by Daniel Balageas and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is organized around the various sensing techniques used to achieve structural health monitoring. Its main focus is on sensors, signal and data reduction methods and inverse techniques, which enable the identification of the physical parameters, affected by the presence of the damage, on which a diagnostic is established. Structural Health Monitoring is not oriented by the type of applications or linked to special classes of problems, but rather presents broader families of techniques: vibration and modal analysis; optical fibre sensing; acousto-ultrasonics, using piezoelectric transducers; and electric and electromagnetic techniques. Each chapter has been written by specialists in the subject area who possess a broad range of practical experience. The book will be accessible to students and those new to the field, but the exhaustive overview of present research and development, as well as the numerous references provided, also make it required reading for experienced researchers and engineers.
Download or read book New Trends in Vibration Based Structural Health Monitoring written by Arnaud Deraemaeker and published by Springer Science & Business Media. This book was released on 2012-01-28 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of articles covering the six lecture courses given at the CISM School on this topic in 2008. It features contributions by established international experts and offers a coherent and comprehensive overview of the state-of-the art research in the field, thus addressing both postgraduate students and researchers in aerospace, mechanical and civil engineering.
Download or read book Structural Health Monitoring Volume 5 written by Alfred Wicks and published by Springer Science & Business. This book was released on 2014-04-18 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fifth volume of eight from the IMAC - XXXII Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Linear Systems Substructure Modelling Adaptive Structures Experimental Techniques Analytical Methods Damage Detection Damping of Materials & Members Modal Parameter Identification Modal Testing Methods System Identification Active Control Modal Parameter Estimation Processing Modal Data
Download or read book Structural Health Monitoring and Detection of Progressive and Existing Damage Using Artificial Neural Networks Based System Identification written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent decades, the growing number of civil and aerospace structures has accelerated the development of damage detection and health monitoring approaches. Many are based upon non-destructive and non-invasive sensing and analysis of structural characteristics, and most use structural response information to identify the existence, location, and time of damage. Model based techniques such as parametric and non-parametric system identification seek to identify changes in the parameters of a dynamic structural model. Restoring forces in real structures can exhibit highly non-linear characteristics, thus accurate non-linear system identification is critical. Parametric system identification approaches are commonly used, but these require a priori assumptions about restoring force characteristics. Non-parametric approaches do not require such information, but they typically lack direct associations between the model and the structural dynamics, providing limited utility for accurate health monitoring and damage detection. This dissertation presents a novel 'Intelligent Parameter Varying' (IPV) health monitoring and damage detection technique that accurately detects the existence, location, and time of damage occurrence without any assumptions about the constitutive nature of structural non-linearities. This technique combines the advantages of parametric techniques with the non-parametric capabilities of artificial neural networks by incorporating artificial neural networks into a traditional parametric model. This hybrid approach benefits from the effectiveness of traditional modeling approaches and from the adaptation and learning capabilities of artificial neural networks. The generality of this IPV approach makes it suitable to a wide range of dynamic systems, including those with non-linear and time-varying characteristics. This IPV technique is demonstrated using a lumped-mass structural model with an embedded array of artificial neural networks. These networks i.
Download or read book Earthquakes and Health Monitoring of Civil Structures written by Mihail Garevski and published by Springer Science & Business Media. This book was released on 2012-12-11 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Health monitoring of civil structures (HMS) is a new discipline, which contributes to successful and on time detection of damages to structures. This book is a collection of chapters on different topics written by leading scientists in the field. It is primarily focused on the latest achievements in monitoring the earthquake effect upon the health of civil structures. The first chapter of the book deals with the geotechnical and structural aspects of the 2010-2011 Christchurch earthquakes. Further chapters are dedicated to the latest HMS techniques of identification of damage to structures caused by earthquakes. Real time damage detection as well as sensors and acquisition systems used for that purpose are presented. The attention is focused on automated modal analysis, dynamic artificial neural networks and wavelet techniques used in HMS. Particular emphasis is put on wireless sensors and piezo-impendance transducers used for evaluation of seismically induced structural damage. The discussion is followed by presentation of case studies of application of health monitoring for buildings and other civil structures, including a super tall structure. The book ends with a presentation of shaking table tests on physical models for the purpose of monitoring their behaviour under earthquake excitation. Audience The book is primarily intended for engineers and scientists working in the field of application of the HMS technique in earthquake engineering. Considering that real time health monitoring of structures represents a sophisticated approach applying the latest techniques of monitoring of structures, many experts from other industries will also find this book useful.
Download or read book Structural Health Monitoring 2011 written by Fu-Kuo Chang and published by DEStech Publications, Inc. This book was released on 2011 with total page 1397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2-volume set of books, comprising over 2,700 total pages, presents 325 fully original presentations on recent advances in structural health monitoring, as applied to commercial and military aircraft (manned and unmanned), high-rise buildings, wind turbines, civil infrastructure, power plants and ships. One general theme of the books is how SHM can be used for condition-based maintenance, with the goal of developing prediction-based systems, designed to save money over the life of vehicles and structures. A second theme centers on technologies for developing systems comprising sensors, diagnostic data and decision-making, with a focus on intelligent materials able to respond to damage and in some cases repair it. Finally the books discuss the relation among data, data interpretation and decision-making in managing a wide variety of complex structures and vehicles. More recent technologies discussed in the books include SHM and environmental effects, energy harvesting, non-contact sensing, and intelligent networks.Material in these books was first presented in September, 2011 at a conference held at Stanford University and sponsored by the Air Force Office of Scientific Research, the Army Research Office, the Office of Naval Research and the National Science Foundation. Some of the highlights of the books include: SHM technologies for condition-based maintenance (CBM) and predictive maintenance Verification, validation, qualification, data mining, prognostics systems for decision-making Structural health, sensing and materials in closed-loop intelligent networks Military and aerospace, bioinspired sensors, wind turbines, monitoring with MEMS, damage sensing, hot spot monitoring, SHM and ships, high-rise structures Includes a fully-searchable CD-ROM displaying many figures and charts in full color
Download or read book Structural Health Monitoring Photogrammetry DIC Volume 6 written by Christopher Niezrecki and published by Springer. This book was released on 2018-05-29 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring Photogrammetry & DIC, Volume 6: Proceedings of the 36th IMAC, A Conference and Exposition on Structural Dynamics, 2018, the sixth volume of nine from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Health Monitoring & Damage Detection, including papers on: Structural Health Monitoring Damage Detection System Identification Active Controls
Download or read book Recent Developments In Structural Health Monitoring And Assessment Opportunities And Challenges Bridges Buildings And Other Infrastructures written by Achintya Haldar and published by World Scientific. This book was released on 2022-01-19 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a follow up to Health Assessment of Engineered Structures. It incorporates the most recent developments in health assessment and monitoring of infrastructures covering several advanced conceptual frameworks, different types of sensors, and application potentials. Opportunities and challenges in theoretical, numerical, and experimental investigations generally overlooked in the profession are discussed. Also included are various types of Bayesian filtering concepts improving the commonly used techniques.Showcasing a multi-faceted, technology-based development in health assessment of infrastructures, several new approaches for health assessment are presented to assess the health of masonry structures, riveted steel railway bridges, and more, such as the use of:
