Download or read book Structural Science of Crystalline Polymers written by Kohji Tashiro and published by Springer Nature. This book was released on with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Crystalline Polymers 1 written by David C. Bassett and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystalline or, more properly, semi-crystalline polymers continue to present major challenges and opportunities to scientists and technologists alike. On the one hand, scientific understanding of their structure and properties still lags behind that of other economically important, but less complicated materials. On the other hand, there remains very considerable potential for improving properties in systems designed for specific pur poses. Ways are only just being found of transferring inherent molecular properties (such as high modulus) to the macromolecular solid. Beyond these are many possibilities of manipulating the organization of chemical and physical textures towards desired ends. The chapters in this volume are reports, by wen-known and active researchers, on some of the important recent developments ofthese themes. Grubb begins with the fundamental and central problem of determining polymeric microstructure. Polymers sutTer by comparison with other materials in that it has not generany been possible to exploit the high resolution of the electron microscope to determine their microstructure in adequate detail. However, recently, ways have been found of studying representative lamellar textures in melt-crystallized polymers. When fully exploited these must add greatly to our detailed knowledge and provide a firmer fundamental base for future developments. Radiation damage bears the primary responsibility for restricting electron microscopy. In his chapter, Kener recounts how appreciation of this fact led him into a fascinating study of ever deeper aspects of radiation damage in polyethylene over two decades, often controversiany but invariably clarifying the basic understanding of an area now of increasing commercial importance.
Download or read book Liquid Crystal Polymers From Structures to Applications written by A.A. Collyer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of liquid crystals and their use in electronic displays and in non-linear optical systems has become of tremendous importance during the last decade; and the incorporation of liquid crystal units into polymeric materials has led to a group of new materials with diverse properties. Some of these properties have been utilized in new products and some have yet to be used. Much published work has appeared that deals with specific materials or particular applications, and it was felt that a book was needed to examine and explain the underlying principles governing the diverse properties of these liquid crystal polymers, LCPs. The current work describes the diverse nature of LCPs, their synthesis, characterization, properties and finally their applications. It describes the manner in which liquid crystallinity or mesomorphism occurs in small molecules, monomer liquid crystals and polymer liquid crystals. Chapter 1 gives a classification of the various ways in which the meso gens may be connected to the polymer chains. Currently, the bulk of LCP material is based on main chain or longitudinal LCPs for use in engineering applications. The side chain or comb polymers are intended for use in electronics and opto-electronic systems and as surfactants. Many other variants and possibilities exist but their properties have not yet been fully studied or used. In this respect it is hoped that the current work will indicate future possibilities as well as discussing current opinion. v Preface vi Chapters 2 and 3 describe methods of characterizing the mesophases.
Download or read book Handbook of Polymer Crystallization written by Ewa Piorkowska and published by John Wiley & Sons. This book was released on 2013-07-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric crystals are more complex in nature than other materials' crystal structures due to significant structural disorder present. The only comprehensive reference on polymer crystallization, Handbook of Polymer Crystallization provides readers with a broad, in-depth guide on the subject, covering the numerous problems encountered during crystallization as well as solutions to resolve those problems to achieve the desired result. Edited by leading authorities in the field, topics explored include neat polymers, heterogeneous systems, polymer blends, polymer composites orientation induced crystallization, crystallization in nanocomposites, and crystallization in complex thermal processing conditions.
Download or read book Structure of Crystalline Polymers written by Hiroyuki Tadokoro and published by . This book was released on 1990 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Polymers written by D.W. van Krevelen and published by Elsevier. This book was released on 2012-12-02 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of Polymers: Their Correlation with Chemical Structure; Their Numerical Estimation and Prediction from Additive Group Contributions summarizes the latest developments regarding polymers, their properties in relation to chemical structure, and methods for estimating and predicting numerical properties from chemical structure. In particular, it examines polymer electrical properties, magnetic properties, and mechanical properties, as well as their crystallization and environmental behavior and failure. The rheological properties of polymer melts and polymer solutions are also considered. Organized into seven parts encompassing 27 chapters, this book begins with an overview of polymer science and engineering, including the typology of polymers and their properties. It then turns to a discussion of thermophysical properties, from transition temperatures to volumetric and calorimetric properties, along with the cohesive aspects and conformation statistics. It also introduces the reader to the behavior of polymers in electromagnetic and mechanical fields of force. The book covers the quantities that influence the transport of heat, momentum, and matter, particularly heat conductivity, viscosity, and diffusivity; properties that control the chemical stability and breakdown of polymers; and polymer properties as an integral concept, with emphasis on processing and product properties. Readers will find tables that give valuable (numerical) data on polymers and include a survey of the group contributions (increments) of almost every additive function considered. This book is a valuable resource for anyone working on practical problems in the field of polymers, including organic chemists, chemical engineers, polymer processers, polymer technologists, and both graduate and PhD students.
Download or read book Liquid Crystalline Polymers written by A. M. Donald and published by Cambridge University Press. This book was released on 2006-05-11 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: A 2006 edition explaining the underlying science and applications of liquid crystalline polymers.
Download or read book Crystallization in Multiphase Polymer Systems written by Sabu Thomas and published by Elsevier. This book was released on 2017-09-15 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystallization in Multiphase Polymer Systems is the first book that explains in depth the crystallization behavior of multiphase polymer systems. Polymeric structures are more complex in nature than other material structures due to their significant structural disorder. Most of the polymers used today are semicrystalline, and the subject of crystallization is still one of the major issues relating to the performance of semicrystalline polymers in the modern polymer industry. The study of the crystallization processes, crystalline morphologies and other phase transitions is of great significance for the understanding the structure-property relationships of these systems. Crystallization in block copolymers, miscible blends, immiscible blends, and polymer composites and nanocomposites is thoroughly discussed and represents the core coverage of this book. The book critically analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale. Various experimental techniques used for the characterization of polymer crystallization process are discussed. Written by experts in the field of polymer crystallization, this book is a unique source and enables professionals and students to understand crystallization behavior in multiphase polymer systems such as block copolymers, polymer blends, composites and nanocomposites. - Covers crystallization of multiphase polymer systems, including copolymers, blends and nanocomposites - Features comprehensive, detailed information about the basic research, practical applications and new developments for these polymeric materials - Analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale
Download or read book Recent Advances in Liquid Crystalline Polymers written by L. L. Chapoy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains an eclectic collection of 22 papers on liquid crystalline polymers presented at the Sixth Polymer Workshop, in the series sponsored by the European Science Foundation, entitled: 'Liquid Crystal Polymer Systems', in Gentofte, Denmark, 12-14 September 1983. Since a contribution to this volume was strictly voluntary, and in some cases represents a considerably expanded version of that which was presented, it is strictly speaking not correct to term this a 'proceedings'. A description of the aims and purposes of the European Science Foundation with respect to the polymer area has been presented in: Shell Polymers, Vol. 5, No.2, pp. 34-35, 1981. The papers given here represent a cross-section of current research interests in liquid crystalline polymers in the areas of theory, synthesis, characterization, structure-property relationships and applications. At least some of the current interest is motivated by attempts to practically exploit the novel properties of these materials in the developing tech nologies of high strength fibres and advanced materials for constructional purposes, but also for functional materials in the areas of information retrieval, electronics and opto-electronics applications. The editor wishes to thank all those involved for their courtesy and co-operation.
Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.
Download or read book Structural Science of Crystalline Polymers written by Kohji Tashiro and published by Springer Nature. This book was released on 2022-05-03 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the modern development of techniques for analysis of the hierarchical structure of polymers from both the experimental and theoretical points of view. Starting with molecular and crystal symmetry, the author explains fundamental and professional methods, such as wide- and small-angle X-ray scattering, neutron diffraction, electron diffraction, FTIR and Raman spectroscopy, NMR, and synchrotron radiation. In addition, the author explains another indispensable method, computer simulation, which includes energy calculation, lattice dynamics, molecular dynamics, and quantum chemistry. These various methods are described in a systematic way so that the reader can utilize them for the purpose of 3D structure analysis of polymers. Not only such analytical knowledge but also the preparation techniques of samples necessary for these measurements and the methods of analyzing the experimental data collected in this way are given in a concrete manner. Examples are offered to help master the principles of how to clarify the static structures and dynamic structural changes in the phase transitions of various kinds of crystalline polymers that are revealed by these novel methods. The examples are quite useful for readers who want to apply these techniques in finding practical solutions to concrete problems that are encountered in their own research. The principal audience for this book is made up of young professional researchers including those working in industry, but it can also be used as an excellent reference for graduate-level students. This book is the first volume of a two-volume set with Structural Science of Crystalline Polymers: A Microscopically Viewed Structure–Property Relationship being the second volume by the same author.
Download or read book Polymer Morphology written by Qipeng Guo and published by John Wiley & Sons. This book was released on 2016-05-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials
Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.
Download or read book Crystals and Crystallinity in Polymers written by Claudio De Rosa and published by John Wiley & Sons. This book was released on 2013-08-26 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the tools needed to master and apply the fundamentals of polymer crystallography Using core concepts in physics, chemistry, polymer science and engineering, this book sheds new light on the complex field of polymer crystallography, enabling readers to evaluate polymer crystallization data and determine the best methods to use for their investigations. The authors set forth a variety of tested and proven methods for analyzing ordered and disordered structures in polymer crystals, including X-ray diffraction, electron diffraction, and microscopy. In addition to the basics, the book explores several advanced and emerging topics in the field such as symmetry breaking, frustration, and the principle of density-driven phase formation. Crystals and Crystallinity in Polymers introduces two new concepts in crystallinity and crystals in synthetic polymers. First, crystallinity in polymeric materials is compatible with the absence of true three-dimensional long-range order. Second, the disorder may be described as a structural feature, using the methods of X-ray scattering and electron diffraction analysis. The book begins by introducing the basic principles and methods for building structural models for the conformation of polymer crystal chains. Next, it covers: Packing of macromolecules in polymer crystals Methods for extracting structural parameters from diffraction data Defects and disorder in polymer crystals Analytical methods for diffuse scattering from disordered polymer structures Crystal habit Influence of crystal defects and structural disorder on the physical and mechanical properties of polymeric materials Crystals and Crystallinity in Polymers examines all the possible types of structural disorder generally present in polymer crystals and describes the influence of each kind of disorder on X-ray and electron diffraction patterns. Its comprehensive, expert coverage makes it possible for readers to learn and apply the fundamentals of polymer crystallography to solve a broad range of problems.
Download or read book Science of Crystal Structures written by Istvan Hargittai and published by Springer. This book was released on 2015-09-09 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: A volume which includes entries on quasicrystals, icosahedral packing, other packing considerations, extended structures, data treatment and data mining is presented by luminaries from the crystallography community. Several of the contributions are from the schools of such trend-setting crystallographers as J. Desmond Bernal and Aleksandr I. Kitaigorodskii. Internationally renowned scientists contributed such as Tom L. Blundell, Johann Jacob Burckhardt, John L. Finney, Jenny P. Glusker, Nobel laureate Herbert A. Hauptman, the 2014 Ewald-Prize winner A. Janner, Aminoff-Prize winner Isabella Karle, Nobel laureate Jerome Karle, Buckley-Prize winner Alan L. Mackay, Ewald-Prize winner David Sayre, Vladimir Shevchenko, and J. Fraser Stoddart. A few frontier topics dominate the selected material. Pioneers of the direct methods describe the phase problem and how it was solved, including the mathematical approach and the utilization of experience with gas-phase electron diffraction. The reviews by Herbert Hauptman, Jerome and Isabella Karle, and David Sayre reach to the present day in assessing the possibilities of X-ray crystallography. Another focus topic is the investigation of systems that are outside the so-called classical system of crystals. They include quasicrystals, imperfect and very small crystals, supramolecular species, crystal structures without lattice, clusters, nanomaterials among others. Application of synchrotron and cryoprotection techniques, the free-electron laser flash technique and others are mentioned in addition to X-ray crystallography. The relationship between structural and materials properties are examined and uncovered. The broader topics of the so-called generalized crystallography include polymers, clusters, polydisperse chain assemblies, and giant icosahedral fullerenes. There are some key contributions related to the structural investigation of biological macromolecules.
Download or read book Concise Encyclopedia of the Structure of Materials written by J. W. Martin and published by Elsevier. This book was released on 2006-10-30 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Concise Encyclopedia draws its material from the award-winning Encyclopedia of Materials: Science and Technology, and includes updates and revisions not available in the original set. This customized collection of articles provides a handy reference for materials scientists and engineers with an interest in the structure of metals, polymers, ceramics and glasses, biomaterials, wood, paper, and liquid crystals.Materials science and engineering is concerned with the relationship between the properties and structure of materials. In this context "structure" may be defined on the atomic scale in the case of crystalline materials, on the molecular scale (in the case of polymers, for example), or on the microscopic scale. Each of these definitions has been applied in making the present selection of articles.* Brings together articles from the Encyclopedia of Materials: Science & Technology that focus on the structure of materials at the atomic, molecular and microscopic levels, plus recent updates* Every article has been commissioned and written by an internationally recognized expert and provides a concise overview of a particular aspect of the field * Extensive bibliographies, cross-referencing and indexes guide the user to the most relevant reading in the primary literature
Download or read book The Physics of Polymers written by Gert R. Strobl and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer physics is one of the key courses not only in polymer science but also in material science. In his textbook Strobl presents the elements of polymer physics to the necessary extent in a very didactical way. His main focus is on the concepts and major phenomena of polymer physics, not just on mere physical methods. He has written the book in a personal style evaluating the concepts he is dealing with. Every student in polymer and materials science will be happy to have it on his shelf.
