Download or read book Structural Motion Engineering written by Jerome Connor and published by Springer. This book was released on 2014-06-26 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This innovative volume provides a systematic treatment of the basic concepts and computational procedures for structural motion design and engineering for civil installations. The authors illustrate the application of motion control to a wide spectrum of buildings through many examples. Topics covered include optimal stiffness distributions for building-type structures, the role of damping in controlling motion, tuned mass dampers, base isolation systems, linear control, and nonlinear control. The book's primary objective the satisfaction of motion-related design requirements such as restrictions on displacement and acceleration and seeks the optimal deployment of material stiffness and motion control devices to achieve these design targets as well as satisfy constraints on strength. The book is ideal for practicing engineers and graduate students.

Download or read book Introduction to Structural Motion Control written by Jerome J. Connor and published by Prentice Hall. This book was released on 2003 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of electrical system design commonly found in residential, commercial, and industrial occupancies. The emphasis is on practical, real-world applications, and stresses designing electrical systems in accordance with the National Electrical Code(r) (NEC(r)). This book leads the reader through topics starting with the basics of electrical system design through more advanced subjects such as voltage drop, short circuit, coordination, and harmonics. For electrical designers and electrical engineers.

Download or read book Structural Dynamics for Engineers written by Hans Anton Buchholdt and published by Thomas Telford. This book was released on 1997 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written to provide practising engineers with an easily understandable introduction to the dynamics of civil engineering whilst ensuring that they acquire an understanding of the theories that form the basis of computer packages.

Download or read book Motion Structures written by Zhong You and published by CRC Press. This book was released on 2011-08-26 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion structures are simply assemblies of resistant bodies connected by movable joints. Unlike conventional structures, they allow large shape transformations to satisfy practical requirements and they can be used in:shelters, emergency structures and exhibition standsaircraft morphing wingssatellite solar panels and space antennasmorphing core ma

Download or read book Structural Dynamics written by Yong Bai and published by John Wiley & Sons. This book was released on 2019-07-11 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two experts across multiple disciplines, this is the perfect reference on structural dynamics for veteran engineers and introduction to the field for engineering students. Across many disciplines of engineering, dynamic problems of structures are a primary concern. Civil engineers, mechanical engineers, aircraft engineers, ocean engineers, and engineering students encounter these problems every day, and it is up to them systematically to grasp the basic concepts, calculation principles and calculation methods of structural dynamics. This book focuses on the basic theories and concepts, as well as the application and background of theories and concepts in engineering. Since the basic principles and methods of dynamics are applied to other various engineering fields, this book can also be used as a reference for practicing engineers in the field across many multiple disciplines and for undergraduate and graduate students in other majors as well. The main contents include basic theory of dynamics, establishment of equation of motion, single degree of freedom systems, multi-degree of freedom systems, distributed-parameter systems, stochastic structural vibrations, research projects of structural dynamics, and structural dynamics of marine pipeline and risers. Whether for the veteran engineer or student, this is a must-have for any scientific or engineering library. Useful for students and veteran engineers and scientists alike, this is the only book covering these important issues facing anyone working with coastal models and ocean, coastal, and civil engineering in this area.

Download or read book Fundamentals of Structural Engineering written by Jerome J. Connor and published by Springer. This book was released on 2016-02-10 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated textbook provides a balanced, seamless treatment of both classic, analytic methods and contemporary, computer-based techniques for conceptualizing and designing a structure. New to the second edition are treatments of geometrically nonlinear analysis and limit analysis based on nonlinear inelastic analysis. Illustrative examples of nonlinear behavior generated with advanced software are included. The book fosters an intuitive understanding of structural behavior based on problem solving experience for students of civil engineering and architecture who have been exposed to the basic concepts of engineering mechanics and mechanics of materials. Distinct from other undergraduate textbooks, the authors of Fundamentals of Structural Engineering, 2/e embrace the notion that engineers reason about behavior using simple models and intuition they acquire through problem solving. The perspective adopted in this text therefore develops this type of intuition by presenting extensive, realistic problems and case studies together with computer simulation, allowing for rapid exploration of how a structure responds to changes in geometry and physical parameters. The integrated approach employed in Fundamentals of Structural Engineering, 2/e make it an ideal instructional resource for students and a comprehensive, authoritative reference for practitioners of civil and structural engineering.

Download or read book Introduction to Dynamics of Structures and Earthquake Engineering written by Gian Paolo Cimellaro and published by Springer. This book was released on 2018-03-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is an elementary but comprehensive textbook which provides the latest updates in the fields of Earthquake Engineering, Dynamics of Structures, Seismology and Seismic Design, introducing relevant new topics to the fields such as the Neodeterministic method. Its main purpose is to illustrate the application of energy methods and the analysis in the frequency domain with the corresponding visualization in the Gauss-Argant plan. However, emphasis is also given to the applications of numerical methods for the solution of the equation of motion and to the ground motion selection to be used in time history analysis of structures. As supplementary materials, this book provides “OPENSIGNAL", a rare and unique software for ground motion selection and processing that can be used by professionals to select the correct earthquake records that would run in the nonlinear analysis. The book contains clear illustrations and figures to describe the subject in an intuitive way. It uses simple language and terminology and the math is limited only to cases where it is essential to understand the physical meaning of the system. Therefore, it is suitable also for those readers who approach these subjects for the first time and who only have a basic understanding of mathematics (linear algebra) and static analysis of structures.

Download or read book Structural Dynamics of Earthquake Engineering written by S Rajasekaran and published by Elsevier. This book was released on 2009-05-30 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the risk of earthquakes in many countries, knowing how structural dynamics can be applied to earthquake engineering of structures, both in theory and practice, is a vital aspect of improving the safety of buildings and structures. It can also reduce the number of deaths and injuries and the amount of property damage. The book begins by discussing free vibration of single-degree-of-freedom (SDOF) systems, both damped and undamped, and forced vibration (harmonic force) of SDOF systems. Response to periodic dynamic loadings and impulse loads are also discussed, as are two degrees of freedom linear system response methods and free vibration of multiple degrees of freedom. Further chapters cover time history response by natural mode superposition, numerical solution methods for natural frequencies and mode shapes and differential quadrature, transformation and Finite Element methods for vibration problems. Other topics such as earthquake ground motion, response spectra and earthquake analysis of linear systems are discussed. Structural dynamics of earthquake engineering: theory and application using Mathematica and Matlab provides civil and structural engineers and students with an understanding of the dynamic response of structures to earthquakes and the common analysis techniques employed to evaluate these responses. Worked examples in Mathematica and Matlab are given. Explains the dynamic response of structures to earthquakes including periodic dynamic loadings and impulse loads Examines common analysis techniques such as natural mode superposition, the finite element method and numerical solutions Investigates this important topic in terms of both theory and practise with the inclusion of practical exercise and diagrams

Download or read book Introduction to Motion Based Design written by Jerome J. Connor and published by Computational Mechanics. This book was released on 1996 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between conventional structural design and the emerging field of motion based design. Topics covered include optimal stiffness distributions, tuned mass dampers and base isolation systems.

Download or read book Structural Dynamics written by Einar N. Strømmen and published by Springer Science & Business Media. This book was released on 2013-09-25 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces to the theory of structural dynamics, with focus on civil engineering structures that may be described by line-like beam or beam-column type of systems, or by a system of rectangular plates. Throughout this book the mathematical presentation contains a classical analytical description as well as a description in a discrete finite element format, covering the mathematical development from basic assumptions to the final equations ready for practical dynamic response predictions. Solutions are presented in time domain as well as in frequency domain. Structural Dynamics starts off at a basic level and step by step brings the reader up to a level where the necessary safety considerations to wind or horizontal ground motion induced dynamic design problems can be performed. The special theory of the tuned mass damper has been given a comprehensive treatment, as this is a theory not fully covered elsewhere. For the same reason a chapter on the problem of moving loads on beams has been included.

Download or read book Reading and Interpreting Strong Motion Accelerograms written by Donald E. Hudson and published by . This book was released on 1979 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Structural Dynamics written by Bruce K. Donaldson and published by Cambridge University Press. This book was released on 2006-10-23 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook, first published in 2006, provides the student of aerospace, civil and mechanical engineering with all the fundamentals of linear structural dynamics analysis. It is designed for an advanced undergraduate or first-year graduate course. This textbook is a departure from the usual presentation in two important respects. First, descriptions of system dynamics are based on the simpler to use Lagrange equations. Second, no organizational distinctions are made between multi-degree of freedom systems and single-degree of freedom systems. The textbook is organized on the basis of first writing structural equation systems of motion, and then solving those equations mostly by means of a modal transformation. The text contains more material than is commonly taught in one semester so advanced topics are designated by an asterisk. The final two chapters can also be deferred for later studies. The text contains numerous examples and end-of-chapter exercises.

Download or read book Fundamentals of Structural Dynamics written by Zhihui Zhou and published by Elsevier. This book was released on 2021-06-08 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics of Structural Dynamics explains foundational concepts and principles surrounding the theory of vibrations and gives equations of motion for complex systems. The book presents classical vibration theory in a clear and systematic way, detailing original work on vehicle-bridge interactions and wind effects on bridges. Chapters give an overview of structural vibrations, including how to formulate equations of motion, vibration analysis of a single-degree-of-freedom system, a multi-degree-of-freedom system, and a continuous system, the approximate calculation of natural frequencies and modal shapes, and step-by-step integration methods. Each chapter includes extensive practical examples and problems. This volume presents the foundational knowledge engineers need to understand and work with structural vibrations, also including the latest contributions of a globally leading research group on vehicle-bridge interactions and wind effects on bridges. Explains the foundational concepts needed to understand structural vibrations in high-speed railways Gives the latest research from a leading group working on vehicle-bridge interactions and wind effects on bridges Lays out routine procedures for generating dynamic property matrices in MATLAB© Presents a novel principle and rule to help researchers model time-varying systems Offers an efficient solution for readers looking to understand basic concepts and methods in vibration analysis

Download or read book Dynamics of Structures Third Edition written by J. Humar and published by CRC Press. This book was released on 2012-03-02 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major textbook provides comprehensive coverage of the analytical tools required to determine the dynamic response of structures. The topics covered include: formulation of the equations of motion for single- as well as multi-degree-of-freedom discrete systems using the principles of both vector mechanics and analytical mechanics; free vibration response; determination of frequencies and mode shapes; forced vibration response to harmonic and general forcing functions; dynamic analysis of continuous systems;and wave propagation analysis. The key assets of the book include comprehensive coverage of both the traditional and state-of-the-art numerical techniques of response analysis, such as the analysis by numerical integration of the equations of motion and analysis through frequency domain. The large number of illustrative examples and exercise problems are of great assistance in improving clarity and enhancing reader comprehension. The text aims to benefit students and engineers in the civil, mechanical, and aerospace sectors.

Download or read book Computational Mechanics in Structural Engineering written by F.Y. Cheng and published by Elsevier. This book was released on 1999-02-16 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Sino-US Symposium Workshop on Recent Advancement of Computational Mechanics in Structural Engineering was held between May 25-28, 1998, in Dalian, China. The objectives were: to share the insights and experiences gained from recent developments in theory and practice; to assess the current state of knowledge in various topic areas of mechanics and computational methods and to identify joint research opportunities; to stimulate future cooperative research and to develop joint efforts in subjects of common needs and interests; to build and to strengthen the long-term bilateral scientific relationship between academic and professional practicing communities.Topics discussed covered the entire field of computational structural mechanics. These topics have advanced broad applications in the engineering practice of modern structural analysis, design and construction of buildings and other structures, and in natural hazard mitigation.

Download or read book Structural Vibration written by C. Beards and published by Elsevier. This book was released on 1996-05-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many structures suffer from unwanted vibrations and, although careful analysis at the design stage can minimise these, the vibration levels of many structures are excessive. In this book the entire range of methods of control, both by damping and by excitation, is described in a single volume.Clear and concise descriptions are given of the techniques for mathematically modelling real structures so that the equations which describe the motion of such structures can be derived. This approach leads to a comprehensive discussion of the analysis of typical models of vibrating structures excited by a range of periodic and random inputs. Careful consideration is also given to the sources of excitation, both internal and external, and the effects of isolation and transmissability. A major part of the book is devoted to damping of structures and many sources of damping are considered, as are the ways of changing damping using both active and passive methods. The numerous worked examples liberally distributed throughout the text, amplify and clarify the theoretical analysis presented. Particular attention is paid to the meaning and interpretation of results, further enhancing the scope and applications of analysis. Over 80 problems are included with answers and worked solutions to most. This book provides engineering students, designers and professional engineers with a detailed insight into the principles involved in the analysis and damping of structural vibration while presenting a sound theoretical basis for further study. Suitable for students of engineering to first degree level and for designers and practising engineersNumerous worked examplesClear and easy to follow

Download or read book Vibrations of Engineering Structures written by C.A. Brebbia and published by Springer Science & Business Media. This book was released on 2013-04-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing size and complexity of new structural forces in engineering have made it necessary for designers to be aware of their dynamic behaviour. Dynamics is a subject which has traditionally been poorly taught in most engineering courses. This book was conceived as a way of providing engineers with a deeper knowledge of dynamic analysis and of indicating to them how some of the new vibrations problems can be solved. The authors start from basic principles to end up with the latest random vibration applications. The book originated 1n a week course given annually by the authors at the Computational Mechanics Centre, Ashurst Lodge, Southampton, England. Special care was taken to ensure continuity in the text and notations. Southampton 1984 CONTENTS Page Foreword Chapter 1 Introduction to Vibration 1. Introductory Remarks 1 2. Single Degree of Freedom Systems: Equations of Motion and Types of Problem 2 3. Response 6 4. General Structures: Equations of Motion 11 5. Response 15 6. Dynamic Interaction Problems 20 Chapter 2 Free Vibration, Resonance and Damping l. Introduction 25 25 2. Spring-Mass System 3. Simple Pendulum 27 4. Beam with Central Load 28 5. Rolling of a Ship 28 6. Springs in Parallel 30 7. Springs in Series 30 8. Free Vibration 31 9. Energy of Vibrating System 33 10. Damped Free Vibration 34 11. Undamped Forced Response 38 12. Damped Forced Response 39 13. Undamped Transient Vibration 42 14. Damped Transient Vibration 43 15.