Download or read book Structural Dynamics with Applications in Earthquake and Wind Engineering written by Konstantin Meskouris and published by Springer. This book was released on 2019-04-27 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive introduction to the theory of structural dynamics, highlighting practical issues and illustrating applications with a large number of worked out examples. In the spirit of “learning by doing” it encourages readers to apply immediately these methods by means of the software provided, allowing them to become familiar with the broad field of structural dynamics in the process. The book is primarily focused on practical applications. Earthquake resistant design is presented in a holistic manner, discussing both the underlying geophysical concepts and the latest engineering design methods and illustrated by fully worked out examples based on the newest structural codes. The spectral characteristics of turbulent wind processes and the main analysis methods in the field of structural oscillations due to wind gusts and vortex shedding are also discussed and applications illustrated by realistic examples of slender chimney structures. The user‐friendly software employed is downloadable and can be readily used by readers to tackle their own problems.
Download or read book Proceedings of the International Conference on Earthquake Engineering and Structural Dynamics written by Rajesh Rupakhety and published by Springer. This book was released on 2018-06-30 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a collection of chapters that were presented at the International Conference on Earthquake Engineering and Structural Dynamics (ICESD), held in Reykjavik, Iceland between 12-14 June 2017. The contributions address a wide spectrum of subjects related to wind engineering, earthquake engineering, and structural dynamics. Dynamic behavior of ultra long span bridges that are discussed in this volume represent one of the most challenging and ambitious contemporary engineering projects. Concepts, principles, and applications of earthquake engineering are presented in chapters addressing various aspects such as ground motion modelling, hazard analysis, structural analysis and identification, design and detailing of structures, risk due to non-structural components, and risk communication and mitigation. The presented chapters represent the state-of-the-art in these fields as well as the most recent developments.
Download or read book Computational Structural Dynamics and Earthquake Engineering written by Manolis Papadrakakis and published by CRC Press. This book was released on 2008-12-04 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing necessity to solve complex problems in Structural Dynamics and Earthquake Engineering requires the development of new ideas, innovative methods and numerical tools for providing accurate numerical solutions in affordable computing times. This book presents the latest scientific developments in Computational Dynamics, Stochastic Dynam
Download or read book Structural Dynamics of Earthquake Engineering written by S Rajasekaran and published by Elsevier. This book was released on 2009-05-30 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the risk of earthquakes in many countries, knowing how structural dynamics can be applied to earthquake engineering of structures, both in theory and practice, is a vital aspect of improving the safety of buildings and structures. It can also reduce the number of deaths and injuries and the amount of property damage. The book begins by discussing free vibration of single-degree-of-freedom (SDOF) systems, both damped and undamped, and forced vibration (harmonic force) of SDOF systems. Response to periodic dynamic loadings and impulse loads are also discussed, as are two degrees of freedom linear system response methods and free vibration of multiple degrees of freedom. Further chapters cover time history response by natural mode superposition, numerical solution methods for natural frequencies and mode shapes and differential quadrature, transformation and Finite Element methods for vibration problems. Other topics such as earthquake ground motion, response spectra and earthquake analysis of linear systems are discussed. Structural dynamics of earthquake engineering: theory and application using Mathematica and Matlab provides civil and structural engineers and students with an understanding of the dynamic response of structures to earthquakes and the common analysis techniques employed to evaluate these responses. Worked examples in Mathematica and Matlab are given. Explains the dynamic response of structures to earthquakes including periodic dynamic loadings and impulse loads Examines common analysis techniques such as natural mode superposition, the finite element method and numerical solutions Investigates this important topic in terms of both theory and practise with the inclusion of practical exercise and diagrams
Download or read book Structural Seismic Design Optimization and Earthquake Engineering Formulations and Applications written by Plevris, Vagelis and published by IGI Global. This book was released on 2012-05-31 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the past few years, there has been extensive research done on structural design in terms of optimization methods or problem formulation. But, much of this attention has been on the linear elastic structural behavior, under static loading condition. Such a focus has left researchers scratching their heads as it has led to vulnerable structural configurations. What researchers have left out of the equation is the element of seismic loading. It is essential for researchers to take this into account in order to develop earthquake resistant real-world structures. Structural Seismic Design Optimization and Earthquake Engineering: Formulations and Applications focuses on the research around earthquake engineering, in particular, the field of implementation of optimization algorithms in earthquake engineering problems. Topics discussed within this book include, but are not limited to, simulation issues for the accurate prediction of the seismic response of structures, design optimization procedures, soft computing applications, and other important advancements in seismic analysis and design where optimization algorithms can be implemented. Readers will discover that this book provides relevant theoretical frameworks in order to enhance their learning on earthquake engineering as it deals with the latest research findings and their practical implementations, as well as new formulations and solutions.
Download or read book Dynamics of Structures written by Anil K. Chopra and published by . This book was released on 1995 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook for courses on dynamics of structures, either at the senior or 1st-year graduate level. The emphasis is on the physics of the problem and interpreting the response of structures to dynamic excitation. There is strong coverage of earthquake engineering.
Download or read book Matrix Analysis of Structural Dynamics written by Franklin Y. Cheng and published by CRC Press. This book was released on 2000-02-01 with total page 997 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uses state-of-the-art computer technology to formulate displacement method with matrix algebra. Facilitates analysis of structural dynamics and applications to earthquake engineering and UBC and IBC seismic building codes.
Download or read book Vibration of Buildings to Wind and Earthquake Loads written by T. Balendra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in the development of high strength materials, coupled with more advanced computational methods and design procedures, have led to a new generation of tall and slender buildings. These structures are very sensitive to the most common dynamic loads; wind and earthquakes. The primary requirement for a successful design is to provide safety while taking into account serviceability requirements. This book provides a well-balanced and broad coverage of the information needed for the design of structural systems for wind- and earthquake-resistant buildings. It covers topics such as the basic concepts in structural dynamics and structural systems, the assessment of wind and earthquake loads acting on the system, the evaluation of the system response to such dynamic loads and the design for extreme loading. The text is generously illustrated and supported by numerical examples and will be of great interest to practising engineers and researchers in structural, civil and design engineering and also to architects. The author has drawn on his experience as a teacher, researcher and consultant.
Download or read book Basic Structural Dynamics written by James C. Anderson and published by John Wiley & Sons. This book was released on 2012-07-16 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise introduction to structural dynamics and earthquake engineering Basic Structural Dynamics serves as a fundamental introduction to the topic of structural dynamics. Covering single and multiple-degree-of-freedom systems while providing an introduction to earthquake engineering, the book keeps the coverage succinct and on topic at a level that is appropriate for undergraduate and graduate students. Through dozens of worked examples based on actual structures, it also introduces readers to MATLAB, a powerful software for solving both simple and complex structural dynamics problems. Conceptually composed of three parts, the book begins with the basic concepts and dynamic response of single-degree-of-freedom systems to various excitations. Next, it covers the linear and nonlinear response of multiple-degree-of-freedom systems to various excitations. Finally, it deals with linear and nonlinear response of structures subjected to earthquake ground motions and structural dynamics-related code provisions for assessing seismic response of structures. Chapter coverage includes: Single-degree-of-freedom systems Free vibration response of SDOF systems Response to harmonic loading Response to impulse loads Response to arbitrary dynamic loading Multiple-degree-of-freedom systems Introduction to nonlinear response of structures Seismic response of structures If you're an undergraduate or graduate student or a practicing structural or mechanical engineer who requires some background on structural dynamics and the effects of earthquakes on structures, Basic Structural Dynamics will quickly get you up to speed on the subject without sacrificing important information.
Download or read book Elements of Earthquake Engineering and Structural Dynamics written by André Filiatrault and published by Presses inter Polytechnique. This book was released on 2002 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena such as earthquakes involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by earthquakes. However, structural engineers must rely on the expertise of other specialists to realize these projects. Thus, this book not only focuses on structural analysis and design, but also discusses other disciplines, such as geology, seismology, and soil dynamics, providing basic knowledge in these areas so that structural engineers can better interact with different specialists when working on earthquake engineering projects."
Download or read book Seismic Analysis of Structures written by T. K. Datta and published by John Wiley & Sons. This book was released on 2010-03-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: While numerous books have been written on earthquakes, earthquake resistance design, and seismic analysis and design of structures, none have been tailored for advanced students and practitioners, and those who would like to have most of the important aspects of seismic analysis in one place. With this book, readers will gain proficiencies in the following: fundamentals of seismology that all structural engineers must know; various forms of seismic inputs; different types of seismic analysis like, time and frequency domain analyses, spectral analysis of structures for random ground motion, response spectrum method of analysis; equivalent lateral load analysis as given in earthquake codes; inelastic response analysis and the concept of ductility; ground response analysis and seismic soil structure interaction; seismic reliability analysis of structures; and control of seismic response of structures. Provides comprehensive coverage, from seismology to seismic control Contains useful empirical equations often required in the seismic analysis of structures Outlines explicit steps for seismic analysis of MDOF systems with multi support excitations Works through solved problems to illustrate different concepts Makes use of MATLAB, SAP2000 and ABAQUAS in solving example problems of the book Provides numerous exercise problems to aid understanding of the subject As one of the first books to present such a comprehensive treatment of the topic, Seismic Analysis of Structures is ideal for postgraduates and researchers in Earthquake Engineering, Structural Dynamics, and Geotechnical Earthquake Engineering. Developed for classroom use, the book can also be used for advanced undergraduate students planning for a career or further study in the subject area. The book will also better equip structural engineering consultants and practicing engineers in the use of standard software for seismic analysis of buildings, bridges, dams, and towers. Lecture materials for instructors available at www.wiley.com/go/dattaseismic
Download or read book Structural Dynamics written by G.I. Schueller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains some new developments in the area of Structural Dynamics. In general it reflects the recent efforts of several Austrian research groups during the years 1985 - 1990. The contents of this book cover both theoretical developments as well as practical applications and hence can be utilized by researchers as well as the practicing engineers. Quite naturally, realistic modeling of a number of load types such as wind and earthquake loading, etc. , requires taking into account statistical uncertainties. Hence these loads have to be characterized by stochastic processes. As a consequence, stochastic aspects must play a major role in modem structural dynamics. Since an extended modeling of the load processes should not be counterbalanced by simplifying the structural models, considerable efforts have been put into the development of procedures which allow the utilization of e. g. FE models and codes which are utilized presently in context with simplified, i. e. "deterministic" load models. Thus the processing of the additional information on loads as well as including statistical properties of the material allows to provide additional answers, i. e. quantification of the risk of structural failure. This volume concentrates on four major areas, i. e. on load modeling, structural response analysis, computational reliability procedures, and finally on practical application. Quite naturally only special fields and particular, i. e. selected types of problems can be covered. Specific reference is made, however, to cases where generalizations are possible.
Download or read book Structural Dynamics of Earthquake Engineering written by Sundaramoorthy Rajasekaran and published by . This book was released on 2009 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This important book looks at how structural dynamics can be applied to earthquake engineering of structures in theory and practice. It will give practical examples of how Mathematica and Matlab can be used to model and predict the way in which structures will be affected by earthquakes. This vital area of modelling/simulation can help design buildings and civil engineering projects to withstand the effects of earthquakes. The book will give an introductory overview of structural dynamics and its importance in earthquake engineering, followed by an in-depth look at the different structural dynamic theories.
Download or read book Introduction to Earthquake Engineering written by Hector Estrada and published by CRC Press. This book was released on 2017-05-18 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended primarily as a textbook for students studying structural engineering. It covers three main areas in the analysis and design of structural systems subjected to seismic loading: basic seismology, basic structural dynamics, and code-based calculations used to determine seismic loads from an equivalent static method and a dynamics-based method. It provides students with the skills to determine seismic effects on structural systems, and is unique in that it combines the fundamentals of structural dynamics with the latest code specifications. Each chapter contains electronic resources: image galleries, PowerPoint presentations, a solutions manual, etc.
Download or read book Dynamics of structures with MATLAB applications written by Ashok K. Jain and published by Pearson Education India. This book was released on 2016 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed for undergraduate and graduate students taking a first course in Dynamics of Structures, Structural Dynamics or Earthquake Engineering. It includes several topics on the theory of structural dynamics and the applications of this theo
Download or read book Structural Dynamics written by Martin Williams and published by CRC Press. This book was released on 2016-04-25 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics is increasingly being identified by consulting engineers as one of the key skills which needs to be taught in civil engineering degree programs. This is driven by the trend towards lighter, more vibration-prone structures, the growth of business in earthquake regions, the identification of new threats such as terrorist attack and the increased availability of sophisticated dynamic analysis tools. Martin Williams presents this short, accessible introduction to the area of structural dynamics. He begins by describing dynamic systems and their representation for analytical purposes. The two main chapters deal with linear analysis of single (SDOF) and multi-degree-of-freedom (MDOF) systems, under free vibration and in response to a variety of forcing functions. Hand analysis of continuous systems is covered briefly to illustrate the key principles. Methods of calculation of non-linear dynamic response is also discussed. Lastly, the key principles of random vibration analysis are presented – this approach is crucial for wind engineering and is increasingly important for other load cases. An appendix briefly summarizes relevant mathematical techniques. Extensive use is made of worked examples, mostly drawn from civil engineering (though not exclusively – there is considerable benefit to be gained from emphasizing the commonality with other branches of engineering). This introductory dynamics textbook is aimed at upper level civil engineering undergraduates and those starting an M.Sc. course in the area.
Download or read book Dynamics of Structures written by Anil K. Chopra and published by Pearson Higher Ed. This book was released on 2012-02-28 with total page 979 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. Designed for senior-level and graduate courses in Dynamics of Structures and Earthquake Engineering. Dynamics of Structures includes many topics encompassing the theory of structural dynamics and the application of this theory regarding earthquake analysis, response, and design of structures. No prior knowledge of structural dynamics is assumed and the manner of presentation is sufficiently detailed and integrated, to make the book suitable for self-study by students and professional engineers.
