Download or read book Structural Dynamics in Earthquake and Blast Resistant Design written by BK Raghu Prasad and published by CRC Press. This book was released on 2020-08-31 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the fundamentals of structural dynamics required for earthquake blast resistant design, Structural Dynamics in Earthquake and Blast Resistant Design initiates a new approach of blending a little theory with a little practical design in order to bridge this unfriendly gap, thus making the book more structural engineer-friendly. This is attempted by introducing the equations of motion followed by free and forced vibrations of SDF and MDF systems, D’Alembert’s principle, Duhammel’s integral, relevant impulse, pulse and sinusoidal inputs, and, most importantly, support motion and triangular pulse input required in earthquake and blast resistant designs, respectively. Responses of multistorey buildings subjected to earthquake ground motion by a well-known mode superposition technique are explained. Examples of real-size structures as they are being designed and constructed using the popular ETABS and STAAD are shown. Problems encountered in such designs while following the relevant codes of practice like IS 1893 2016 due to architectural constraints are highlighted. A very difficult constraint is in avoiding torsional modes in fundamental and first three modes, the inability to get enough mass participation, and several others. In blast resistant design the constraint is to model the blast effects on basement storeys (below ground level). The problem is in obtaining the attenuation due to the soil. Examples of inelastic hysteretic systems where top soft storey plays an important role in expending the input energy, provided it is not below a stiffer storey (as also required by IS 1893 2016), and inelastic torsional response of structures asymmetric in plan are illustrated in great detail. In both cases the concept of ductility is explained in detail. Results of response spectrum analyses of tall buildings asymmetric in plan constructed in Bengaluru using ETABS are mentioned. Application of capacity spectrum is explained and illustrated using ETABS for a tall building. Research output of retrofitting techniques is mentioned. Response spectrum analysis using PYTHON is illustrated with the hope that it could be a less expensive approach as it is an open source code. A new approach of creating a fictitious (imaginary) boundary to obtain blast loads on below-ground structures devised by the author is presented with an example. Aimed at senior undergraduates and graduates in civil engineering, earthquake engineering and structural engineering, this book: Explains in a simple manner the fundamentals of structural dynamics pertaining to earthquake and blast resistant design Illustrates seismic resistant designs such as ductile design philosophy and limit state design with the use of capacity spectrum Discusses frequency domain analysis and Laplace transform approach in detail Explains solutions of building frames using software like ETABS and STAAD Covers numerical simulation using a well-known open source tool PYTHON

Download or read book Blast and Ballistic Loading of Structures written by John Hetherington and published by CRC Press. This book was released on 2014-04-21 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together, in a concise format, the key elements of the loads produced from explosive sources, and how they interact with structures. Explosive sources include gas, high explosives, dust and nuclear materials.It presents quantitative information and design methods in a useable form without recourse to extensive mathematical ana

Download or read book Structural Dynamics in Earthquake and Blast Resistant Design written by B. K. Raghu Prasad and published by CRC Press. This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the fundamentals of structural dynamics required for earthquake blast resistant design, Structural Dynamics in Earthquake and Blast Resistant Design initiates a new approach of blending a little theory with a little practical design in order to bridge this unfriendly gap, thus making the book more structural engineer-friendly. This is attempted by introducing the equations of motion followed by free and forced vibrations of SDF and MDF systems, D'Alembert's principle, Duhammel's integral, relevant impulse, pulse and sinusoidal inputs, and, most importantly, support motion and triangular pulse input required in earthquake and blast resistant designs, respectively. Responses of multistorey buildings subjected to earthquake ground motion by a well-known mode superposition technique are explained. Examples of real-size structures as they are being designed and constructed using the popular ETABS and STAAD are shown. Problems encountered in such designs while following the relevant codes of practice like IS 1893 2016 due to architectural constraints are highlighted. A very difficult constraint is in avoiding torsional modes in fundamental and first three modes, the inability to get enough mass participation, and several others. In blast resistant design the constraint is to model the blast effects on basement storeys (below ground level). The problem is in obtaining the attenuation due to the soil. Examples of inelastic hysteretic systems where top soft storey plays an important role in expending the input energy, provided it is not below a stiffer storey (as also required by IS 1893 2016), and inelastic torsional response of structures asymmetric in plan are illustrated in great detail. In both cases the concept of ductility is explained in detail. Results of response spectrum analyses of tall buildings asymmetric in plan constructed in Bengaluru using ETABS are mentioned. Application of capacity spectrum is explained and illustrated using ETABS for a tall building. Research output of retrofitting techniques is mentioned. Response spectrum analysis using PYTHON is illustrated with the hope that it could be a less expensive approach as it is an open source code. A new approach of creating a fictitious (imaginary) boundary to obtain blast loads on below-ground structures devised by the author is presented with an example. Aimed at senior undergraduates and graduates in civil engineering, earthquake engineering and structural engineering, this book: Explains in a simple manner the fundamentals of structural dynamics pertaining to earthquake and blast resistant design Illustrates seismic resistant designs such as ductile design philosophy and limit state design with the use of capacity spectrum Discusses frequency domain analysis and Laplace transform approach in detail Explains solutions of building frames using software like ETABS and STAAD Covers numerical simulation using a well-known open source tool PYTHON

Download or read book Handbook for Blast Resistant Design of Buildings written by Donald O. Dusenberry and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.

Download or read book Structural Dynamics of Earthquake Engineering written by S Rajasekaran and published by Elsevier. This book was released on 2009-05-30 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the risk of earthquakes in many countries, knowing how structural dynamics can be applied to earthquake engineering of structures, both in theory and practice, is a vital aspect of improving the safety of buildings and structures. It can also reduce the number of deaths and injuries and the amount of property damage.The book begins by discussing free vibration of single-degree-of-freedom (SDOF) systems, both damped and undamped, and forced vibration (harmonic force) of SDOF systems. Response to periodic dynamic loadings and impulse loads are also discussed, as are two degrees of freedom linear system response methods and free vibration of multiple degrees of freedom. Further chapters cover time history response by natural mode superposition, numerical solution methods for natural frequencies and mode shapes and differential quadrature, transformation and Finite Element methods for vibration problems. Other topics such as earthquake ground motion, response spectra and earthquake analysis of linear systems are discussed.Structural dynamics of earthquake engineering: theory and application using Mathematica and Matlab provides civil and structural engineers and students with an understanding of the dynamic response of structures to earthquakes and the common analysis techniques employed to evaluate these responses. Worked examples in Mathematica and Matlab are given. - Explains the dynamic response of structures to earthquakes including periodic dynamic loadings and impulse loads - Examines common analysis techniques such as natural mode superposition, the finite element method and numerical solutions - Investigates this important topic in terms of both theory and practise with the inclusion of practical exercise and diagrams

Download or read book Structural Dynamics written by Mario Paz and published by Springer Science & Business Media. This book was released on 1997-07-31 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of COSMOS for the analysis and solution of structural dynamics problems is introduced in this new edition. The COSMOS program was selected from among the various professional programs available because it has the capability of solving complex problems in structures, as well as in other engin eering fields such as Heat Transfer, Fluid Flow, and Electromagnetic Phenom ena. COSMOS includes routines for Structural Analysis, Static, or Dynamics with linear or nonlinear behavior (material nonlinearity or large displacements), and can be used most efficiently in the microcomputer. The larger version of COSMOS has the capacity for the analysis of structures modeled up to 64,000 nodes. This fourth edition uses an introductory version that has a capability limited to 50 nodes or 50 elements. This version is included in the supplement, STRUCTURAL DYNAMICS USING COSMOS 1. The sets of educational programs in Structural Dynamics and Earthquake Engineering that accompanied the third edition have now been extended and updated. These sets include programs to determine the response in the time or frequency domain using the FFf (Fast Fourier Transform) of structures modeled as a single oscillator. Also included is a program to determine the response of an inelastic system with elastoplastic behavior and a program for the development of seismic response spectral charts. A set of seven computer programs is included for modeling structures as two-dimensional and three dimensional frames and trusses.

Download or read book Dynamic Loading and Design of Structures written by Andreas Kappos and published by CRC Press. This book was released on 2001-10-11 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, information on the dynamic loading of structures has been widely scattered. No other book has examined the different types of loading in a comprehensive and systematic manner, and looked at their signficance in the design process. The book begins with a survey of the probabilistic background to all forms of loads, which is particularly important to dynamic loads, and then looks at the main types in turn: wind, earthquake, wave, blast and impact loading. The relevant code provisions (Eurocode and UBC American) are detailed and a number of examples are used to illustrate the principles. A final section covers the analysis for dynamic loading, drawing out the concepts underlying the treatment of all dynamic loads, and the corresponding modelling techniques. Throughout there is a focus on the modelling of structures, rather than on classical structural dynamics.

Download or read book Earthquake Engineering for Structural Design written by Victor Gioncu and published by CRC Press. This book was released on 2010-08-04 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Earthquake Engineering have focussed on the capacity and response of structures. They often overlook the importance of seismological knowledge to earthquake-proofing of design. It is not enough only to understand the anatomy of the structure, you must also appreciate the nature of the likely earthquake.Seismic design, as detailed in

Download or read book Advanced Modelling Techniques in Structural Design written by Feng Fu and published by John Wiley & Sons. This book was released on 2015-06-15 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The successful design and construction of iconic new buildings relies on a range of advanced technologies, in particular on advanced modelling techniques. In response to the increasingly complex buildings demanded by clients and architects, structural engineers have developed a range of sophisticated modelling software to carry out the necessary structural analysis and design work. Advanced Modelling Techniques in Structural Design introduces numerical analysis methods to both students and design practitioners. It illustrates the modelling techniques used to solve structural design problems, covering most of the issues that an engineer might face, including lateral stability design of tall buildings; earthquake; progressive collapse; fire, blast and vibration analysis; non-linear geometric analysis and buckling analysis . Resolution of these design problems are demonstrated using a range of prestigious projects around the world, including the Buji Khalifa; Willis Towers; Taipei 101; the Gherkin; Millennium Bridge; Millau viaduct and the Forth Bridge, illustrating the practical steps required to begin a modelling exercise and showing how to select appropriate software tools to address specific design problems.

Download or read book Design of Blast resistant Buildings in Petrochemical Facilities written by Society of Civil Engineers. Task Committee on Blast Resistant Design and published by Amer Society of Civil Engineers. This book was released on 2010 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition provides general guidelines for the structural design of blast-resistant petrochemical facilities. Information is provided for U.S. Occupational Safety and Health Administration (OSHA) requirements, design objectives, siting considerations, and load determination, and references cite sources of detailed information. Detailed coverage is provided for types of construction, dynamic material strengths, allowable response criteria, analysis methods, and design procedures. Typical details and ancillary considerations, such as doors and windows, are also included. A how-to discussion on the upgrade of existing buildings is provided for older facilities which may not meet current needs. Three example calculations are included to illustrate design procedures.

Download or read book Papers Presented at the Conference on Atomic Energy Education University of New Mexico October 17 and 18 1952 written by and published by . This book was released on 1953 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automation in Construction toward Resilience written by Ehsan Noroozinejad Farsangi and published by CRC Press. This book was released on 2023-09-29 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the word "automation" may conjure images of robots taking over jobs, the reality is much more nuanced. In construction, for instance, automation is less likely to diminish employment opportunities than it is to increase productivity. Indeed, automation alongside the global need for new and updated infrastructure and better and more affordable housing can help shape the direction of the construction industry. The key will be anticipating and preparing for the shift, in part by developing new skills in the current and future workforce. This book presents all aspects of automation in construction pertaining to the use of information technologies in design, engineering, construction technologies, and maintenance and management of constructed facilities. The broad scope encompasses all stages of the construction life cycle from initial planning and design, through the construction of the facility, its operation, and maintenance, to the eventual dismantling and recycling of buildings and engineering structures. Features: Examines Building Information Management systems, allowing on-site execution of construction more efficient, and for project teams to eliminate mistakes and better coordinate the workforce Presents the latest information on the automation of modular construction, production in factories, including 3-D printing of components such as facades, or even load-bearing and essential components

Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.

Download or read book Advanced Soil Dynamics and Earthquake Engineering written by Bharat Bhushan Prasad and published by PHI Learning Pvt. Ltd.. This book was released on 2011 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimization of Design for Better Structural Capacity written by Belgasmia, Mourad and published by IGI Global. This book was released on 2018-11-16 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the development of advanced methods, models, and algorithms, optimization within structural engineering remains a primary method for overcoming potential structural failures. With the overarching goal to improve capacity, limit structural damage, and assess the structural dynamic response, further improvements to these methods must be entertained. Optimization of Design for Better Structural Capacity is an essential reference source that discusses the advancement and augmentation of optimization designs for better behavior of structure under different types of loads, as well as the use of these advanced designs in combination with other methods in civil engineering. Featuring research on topics such as industrial software, geotechnical engineering, and systems optimization, this book is ideally designed for architects, professionals, researchers, engineers, and academicians seeking coverage on advanced designs for use in civil engineering environments.

Download or read book Earthquake Engineering and Structural Control written by Srinivasan Chandrasekaran and published by CRC Press. This book was released on 2024-11-29 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Engineering and Structural Control: Theory and Applications examines the basics of structural dynamics with its application for earthquake engineering and structural control methods. The objective is not to explain earthquake-resistant design but rather to present different methods of analysis under earthquake and other environmental loads such as fire and physical impact. While presenting fundamental concepts in a simple manner, this book presents structural systems and offshore structures leading to form-dominant design. The response spectrum method and nonlinear time history analysis of structures under earthquake loads are discussed in detail, while the basics of earthquake-resistant design through planning guidelines, as well as introductory seismology, are also covered. Presents dynamic analysis and illustrations of single-degree-of-freedom systems with numerous examples to explain the response spectrum analysis under earthquake and impact loads. Offers detailed solutions to multi-degree-of-freedom systems through numerical methods, supported by MATLAB® examples. Explains the proper application of seismic controls for different classes of structures, including offshore.

Download or read book Dynamics of Structures Second Edition written by J. Humar and published by CRC Press. This book was released on 2002-01-01 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major textbook provides comprehensive coverage of the analytical tools required to determine the dynamic response of structures. The topics covered include: formulation of the equations of motion for single- as well as multi-degree-of-freedom discrete systems using the principles of both vector mechanics and analytical mechanics; free vibration response; determination of frequencies and mode shapes; forced vibration response to harmonic and general forcing functions; dynamic analysis of continuous systems;and wave propagation analysis. The key assets of the book include comprehensive coverage of both the traditional and state-of-the-art numerical techniques of response analysis, such as the analysis by numerical integration of the equations of motion and analysis through frequency domain. The large number of illustrative examples and exercise problems are of great assistance in improving clarity and enhancing reader comprehension. The text aims to benefit students and engineers in the civil, mechanical and aerospace sectors.