Download or read book Structural Design of Tall Concrete and Masonry Buildings written by Council on Tall Buildings and Urban Habitat and published by . This book was released on 1978-01-01 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings Structural design of tall concrete and masonry buildings written by and published by . This book was released on 1973 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural design of tall concrete masonry buildings written by and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tall buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2014-08-01 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 73: Tall Buildings is the result of a collaboration between the fib and MPA The Concrete Centre (UK). Task Group 1.6 High-rise buildings, within fib Commission 1: Structures, was drawn together with a mandate to write about the experience and know-how pertinent to the development, design and construction of tall concrete buildings. The group’s findings are presented in this state-of the-art report. Tall buildings are a unique challenge to engineers, even to those with extensive experience of low-rise structures. The bulletin explains the critical interfaces with other professionals, for example architects, building services engineers, façade and lift specialists, geotechnical engineers and wind specialists, highlighting how these parties interact with engineers and can influence and guide the development of the structural solution. The key factors in choosing the most appropriate structural system are discussed. The bulletin covers the criteria used to select the most economical structural elements including the foundations, the vertical elements and the floor slabs. Examples of common construction methods are presented and their effects on the structural engineering design are discussed. Tall buildings can undergo significant deformation during their construction and service life. These movements need to be understood by the designer and potentially compensated for in the design and during construction. One of the main particularities of the design of tall buildings is the dominance of the lateral loading from wind and seismic actions. The bulletin provides a discussion of these important topics and sets out the current approach taken by experienced engineers. Designers of tall buildings also need to understand the dynamic behaviour of the structure and confine the motion of the building to within acceptable limits. Approaches to damping and dynamic performance are discussed and guidance provided on the appropriate occupant comfort limits.
Download or read book Design of Reinforced Masonry Structures written by Narendra Taly and published by McGraw Hill Professional. This book was released on 2010-06-05 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Definitive Guide to Designing Reinforced Masonry Structures Fully updated to the 2009 International Building Code (2009 IBC) and the 2008 Masonry Standards Joint Committee (MSJC-08), Design of Reinforced Masonry Structures, second edition, presents the latest methods for designing strong, safe, and economical structures with reinforced masonry. The book is packed with more than 425 illustrations and a wealth of new, detailed examples. This state-of-the-art guide features strength design philosophy for reinforced masonry structures based on ASCE 7-05 design loads for wind and seismic design. Written by an internationally acclaimed author, this essential professional tool takes you step-by-step through the art, science, and engineering of reinforced masonry structures. COVERAGE INCLUDES: Masonry units and their applications Materials of masonry construction Flexural analysis and design Columns Walls under gravity and transverse loads Shear walls Retaining and subterranean walls General design and construction considerations Anchorage to masonry Design aids and tables
Download or read book Tall Building Criteria and Loading written by Leslie E. Robertson and published by ASCE Publications. This book was released on 1980-01-01 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Council on Tall Buildings and Urban Habitat of ASCE. This report examines the loads to which tall buildings are subjected so that engineers can precisely define the related structural elements that are necessary before translating a client's needs into a safe design. The report explores five different classes of loads?gravity loads and temperature affects, earthquake loads, wind loading and wind effects, fire, and accidental loads?as well as quality control and overall safety considerations.ØSteel buildings, which hold the record for height, tax the designer's ingenuity to provide adequate resistance to lateral loading. Concrete buildings are both more numerous and widely distributed, and for them vertical gravity loads may be the chief problem. Both steel and concrete buildings and lateral and vertical loads are addressed. Other subjects covered include: dead, live, cyclic snow, construction, and combined loads; code requirements; meteorological and environmental factors in design; firefighting provisions; and modeling. Contributions came from more than 800 contributors, all international and professional and heavily representing design and industrial firms. Condensed references follow each chapter, and a glossary is included.
Download or read book Masonry Structural Design for Buildings written by and published by . This book was released on 1992 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masonry Structural Design written by Richard E. Klingner and published by McGraw Hill Professional. This book was released on 2010-02-08 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Guide to Masonry Materials and Structural Design Written by the former chair of the Masonry Standards Joint Committee (MSJC), this authoritative volume covers the design of masonry structures using the 2009 International Building Code and the 2008 MSJC Code and Specification. Masonry Structural Design emphasizes the strength design of masonry and includes allowable-stress provisions. Innovations such as autoclaved aerated concrete masonry (AAC) are also discussed. Real-world case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the techniques presented in this comprehensive resource. Coverage includes: Basic structural behavior and design of low-rise, bearing wall buildings Materials used in masonry construction Code basis for structural design of masonry buildings, including seismic design Introduction of MSJC treatment of structural design Strength design of reinforced and unreinforced masonry elements Allowable-stress design of reinforced and unreinforced masonry elements Comparison of design by the allowable-stress approach versus the strength approach Lateral load analysis of shear wall structure Design and detailing of floor and roof diaphragms
Download or read book Design of Masonry Structures written by A.W. Hendry and published by CRC Press. This book was released on 2017-10-02 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition has been fully revised and extended to cover blockwork and Eurocode 6 on masonry structures. This valued textbook:Discusses all aspects of design of masonry structures in plain and reinforced masonry.summarizes materials properties and structural principles as well as describing structure and content of codes.Presents design procedures
Download or read book Reinforced Concrete Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2009-12-14 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of the world of concrete as it applies to the construction of buildings, Reinforced Concrete Design of Tall Buildings provides a practical perspective on all aspects of reinforced concrete used in the design of structures, with particular focus on tall and ultra-tall buildings. Written by Dr. Bungale S. Taranath, this work explains t
Download or read book Planning and Design of Tall Buildings written by Joint Committee on Tall Buildings and published by . This book was released on 1975 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cast in place Concrete in Tall Building Design and Construction written by L. G. Aycardi and published by McGraw-Hill Companies. This book was released on 1992 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes all aspects of cast-in-place concrete design and construction, and presents several innovative state-of-the-art techniques that will challenge the ways engineers have traditionally approached such tall building projects. Some of the important issues covered include: an in-depth discussion of construction loads, including material, shoring, and reshoring; new materials and techniques, including fibre-reinforced and high-strength concrete; structural analysis; alternate design methods. This book may be of interest to structural and construction engineers working on the design of tall buildings using cast-in-place concrete.
Download or read book Masonry Structural Design Second Edition written by Jennifer Eisenhauer Tanner and published by McGraw Hill Professional. This book was released on 2017-05-21 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly Updated Coverage of Masonry Codes, Materials, and Structural Design This fully revised resource covers the design of masonry structures using the 2015 International Building Code, the ASCE 7-10 loading standard, and the TMS 402-13 and TMS 602-13 design and construction standards. The book emphasizes the strength design of masonry and includes allowable-stress provisions. The latest advances, materials, and techniques are clearly explained. Chapter-long case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the topics presented. Masonry Structural Design, Second Edition, covers: • Structural behavior and design of low-rise, bearing wall buildings • Materials used in masonry construction • Code basis for structural design of masonry buildings • Basics of seismic design in masonry buildings • Introduction to MSJC treatment of structural design • Strength design of reinforced and unreinforced masonry elements • Allowable-stress design of reinforced and unreinforced masonry elements • Comparison of design by the allowable-stress approach versus the strength approach • Lateral load analysis of shear wall structure • Design and detailing of floor and roof diaphragms • Structural design of AAC masonry
Download or read book Seismic Design of Reinforced and Precast Concrete Buildings written by Robert E. Englekirk and published by John Wiley & Sons. This book was released on 2003-03-10 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Presents the basics of seismic-resistant design of concrete structures. * Provides a major focus on the seismic design of precast bracing systems.
Download or read book Structural Masonry written by Arnold W. Hendry and published by Scholium International. This book was released on 1990 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive text on the structural design of masonry buildings, theories of stress, design analysis of unreinforced structures and the methods of testing masonry materials.
Download or read book The Vertical Building Structure written by Wolfgang Schueller and published by Van Nostrand Reinhold Company. This book was released on 1990 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Schueller, both a structural engineer and an architect, has combined the fundamental ideas and perspectives of his two fields into a single reference. He presents discussions, illustrations, graphs, and equations for modern building structure systems from geometric, aesthetic, historical, functional, environmental, and construction viewpoints. Suitable as a textbook for graduate and advanced undergraduate courses in building structures and design engineering. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Masonry Structures written by Robert G. Drysdale and published by Englewood Cliffs, N.J. : Prentice Hall. This book was released on 1994 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broad introduction to masonry from ancient beginnings to modern usage, this book covers planning, materials science, building science, structural design and construction. Designed to cover matters of international validity, the book is not confined by adherence to any one code.
