Download or read book Structural Design for the Stage written by Alys Holden and published by CRC Press. This book was released on 2015-02-20 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The follow-up to the 2000 Golden Pen Award-winning Structural Design for the Stage, this second edition provides the theater technician with a foundation in structural design, allowing an intuitive understanding of "why sets stand up." It introduces the basics of statics and the study of the strength of materials as they apply to typical scenery, emphasizing conservative approaches to real world examples. This is an invaluable reference for any serious theatre technician throughout their career, from the initial study of the fundamental concepts, to the day-to-day use of the techniques and reference materials. Now in hardcover, with nearly 200 new pages of content, it has been completely revised and updated to reflect the latest recommended practices of the lumber and steel industries, while also including aluminum design for the first time.
Download or read book Metric Handbook written by Pamela Buxton and published by Taylor & Francis. This book was released on 2021-11-25 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Metric Handbook is the major handbook of planning and design data for architects and architecture students, with over 100,000 copies sold to successive generations of architects and designers. It remains the ideal starting point for any project and belongs in every design office. The seventh edition references the latest regulations and construction standards and includes new chapters on data centres and logistics facilities alongside basic design data for all the major building types. For each building type, the book gives the basic design requirements and all the principal dimensional data, and succinct guidance on how to use the information and what regulations the designer needs to be aware of. As well as buildings, the Metric Handbook deals with broader aspects of design such as materials, acoustics, and lighting, and general design data on human dimensions and space requirements. The Metric Handbook is the unique reference for solving everyday planning problems.
Download or read book Advanced Metric Wave Radar written by Jianqi Wu and published by Springer. This book was released on 2019-07-12 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically describes advanced metric wave radar and its practical applications, offering a comprehensive introduction to the engineering design methods from the perspectives of system design, antenna/feed and transmit/receive subsystems, as well as mechanical structure design. Focusing on the height-finding method, it describes in detail how the super-resolution technique can be used to solve the problem of low-angle height finding in metric wave radar. It also discusses the anti-jamming method for the unique jamming environment. Further, it presents narrowband target recognition methods to overcome the limitations of narrow absolute bandwidth in metric wave radar and to further explore the technique’s potential. Cooperative detection for metric wave radar netting is also addressed, and the main experimental results are included. The book offers a valuable resource for professional engineers, researchers and teachers, as well as graduate students engaged in radar system engineering, electronic engineering, and signal processing.
Download or read book Practical Design of Ships and Other Floating Structures written by Tetsuo Okada and published by Springer Nature. This book was released on 2020-10-03 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed proceedings of the 14th International Symposium, PRADS 2019, held in Yokohama, Japan, in September 2019. It brings together naval architects, engineers, academic researchers and professionals who are involved in ships and other floating structures to share the latest research advances in the field. The contents cover a broad range of topics, including design synthesis for ships and floating systems, production, hydrodynamics, and structures and materials. Reflecting the latest advances, the book will be of interest to researchers and practitioners alike.
Download or read book Minimum Design Loads for Buildings and Other Structures written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2000 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metric Handbook written by David Littlefield and published by Routledge. This book was released on 2012-09-10 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Fully updated in reference to the latest construction standards and new building types • Sustainable design fully integrated into each chapter • Over 100,000 copies sold to successive generations of architects and designers – this book truly belongs on every design office desk and drawing board. The Metric Handbook is the major handbook of planning and design data for architects and architecture students. Covering basic design data for all the major building types it is the ideal starting point for any project. For each building type, the book gives the basic design requirements and all the principal dimensional data, and succinct guidance on how to use the information and what regulations the designer needs to be aware of. As well as buildings the Metric Handbook deals with broader aspects of design such as materials, acoustics and lighting, and general design data on human dimensions and space requirements. The Metric Handbook really is the unique reference for solving everyday planning problems. About the Author: David Littlefield is a senior lecturer at the University of the West of England, where he teaches in the department of planning and architecture. For many years he worked as a writer and journalist. David has written, co-written or edited over ten books on architecture. Customer reviews: “This book is a great investment as you will use it throughout your career as an architect.” “I have found that this book is the Bible for all planners, contains so much information that no designer or planner should be without a copy.” “An essential reference book that should be on the shelf in any design studio.”
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book COBE s Search for Structure in the Big Bang written by and published by . This book was released on 1989 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Based Building Design 1 written by Hugo S. L. Hens and published by John Wiley & Sons. This book was released on 2012-10-07 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: So wenig wie die Bauphysik standen Energieeffizienz und Gebäudeperformance vor der Energiekrise der 1970er Jahre bei der Planung von Gebäuden auf der Tagesordnung. Mit der wachsenden Notwendigkeit der Energieeinsparung stieg aber das Interesse an der ganzheitlichen Gebäudeplanung. Das zweibändige Werk stellt die ganzheitliche Gebäudebetrachtung und seine "Performance", getragen von der Anwendung bauphysikalischer Zusammenhänge, in der Planung und Ausführung dar. Der Begriff "Gebäudeperformance" meint hier alle Gebäude bezogenen physikalischen Eigenschaften, die im Entwurfsprozess planbar und während des Bauprozesses und im Betrieb kontrollierbar sind. Der Begriff "planbar" erfordert Berechnungsmodelle und -verfahren für die Bemessung und Auslegung, während "kontrollierbar" den Einsatz von Messtechnik und Vergleichsanalysen erfordert. Dieser erste von zwei Bänden stellt die ganzheitliche Gebäudebetrachtung, getragen von der Anwendung bauphysikalischer Zusammenhänge, in der Planung und Ausführung dar. Einem Überblick über die wesentlichen Materialien für Wärmedämmung, Abdichtung, Luftdichtigkeit und Feuchteschutz sowie Erläuterungen über Fugen folgt eine ausführliche Darstellung der Hochbaukonstruktionen, beginnend bei der Baugrube. Anschließend werden Gründungen, erdberührte und aufsteigende Bauteile, übliche Lastabtragungs- und Deckensysteme bis hin zu massiven Außenwänden mit außenseitiger oder Innendämmung und zweischaligen Wänden behandelt. Dabei folgen die meisten Kapitel der Systematik: Überblick, allgemeine Anforderungen, Planung, Ausführung. Das Werk bietet sowohl für Studenten der Architektur und des Bauingenieurwesens umfassendes Rüstzeug für die Bewältigung von Hochbaukonstruktionen, als auch den in der Praxis tätigen Bauingenieuren ein Nachschlagewerk zur Auffrischung des Wissens. Das Buch setzt gründliche Kenntnisse der Bauphysik sowie Grundkenntnisse in Tragwerksplanung, Baustoffkunde und Baukonstruktionen voraus.
Download or read book Fibrous Composites in Structural Design written by Edward M. Lenoe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth Conference on Fibrous Composites in Structural Design was a successor to the First-to-Third Conferences on Fibrous Composites in Flight Vehicle Design sponsored by the Air Force (First and Second Conferences, September 1973 and May 1974) and by NASA (Third Conference, November 1975) which were aimed at focusing national attention on flight vehicle applications of a new class of fiber reinforced materials, the advanced com posites, which afforded weight savings and other advantages which had not been previously available. The Fourth Conference, held at San Diego, California, 14-17 November 1978, was the fi rst of these conferences to be jointly sponsored by the Army, Navy and Ai r Force together with NASA, as well as being the first to give attention to non-aerospace applications of fiber reinforced composites. While the design technology for aerospace applications has reached a state of relative maturity, other areas of application such as mi litary bridging, flywheel energy storage systems, ship and surface vessel components and ground vehicle components are in an early stage of development, and it was an important objective to pinpoint where careful attention to structural design was needed in such applications to achfeve maximum structural performance payoff together with a high level of reliability and attractive economics.
Download or read book Computer Organization and Design MIPS Edition written by David A. Patterson and published by Newnes. This book was released on 2013-09-30 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Organization and Design, Fifth Edition, is the latest update to the classic introduction to computer organization. The text now contains new examples and material highlighting the emergence of mobile computing and the cloud. It explores this generational change with updated content featuring tablet computers, cloud infrastructure, and the ARM (mobile computing devices) and x86 (cloud computing) architectures. The book uses a MIPS processor core to present the fundamentals of hardware technologies, assembly language, computer arithmetic, pipelining, memory hierarchies and I/O.Because an understanding of modern hardware is essential to achieving good performance and energy efficiency, this edition adds a new concrete example, Going Faster, used throughout the text to demonstrate extremely effective optimization techniques. There is also a new discussion of the Eight Great Ideas of computer architecture. Parallelism is examined in depth with examples and content highlighting parallel hardware and software topics. The book features the Intel Core i7, ARM Cortex-A8 and NVIDIA Fermi GPU as real-world examples, along with a full set of updated and improved exercises. This new edition is an ideal resource for professional digital system designers, programmers, application developers, and system software developers. It will also be of interest to undergraduate students in Computer Science, Computer Engineering and Electrical Engineering courses in Computer Organization, Computer Design, ranging from Sophomore required courses to Senior Electives. Winner of a 2014 Texty Award from the Text and Academic Authors Association Includes new examples, exercises, and material highlighting the emergence of mobile computing and the cloud Covers parallelism in depth with examples and content highlighting parallel hardware and software topics Features the Intel Core i7, ARM Cortex-A8 and NVIDIA Fermi GPU as real-world examples throughout the book Adds a new concrete example, "Going Faster," to demonstrate how understanding hardware can inspire software optimizations that improve performance by 200 times Discusses and highlights the "Eight Great Ideas" of computer architecture: Performance via Parallelism; Performance via Pipelining; Performance via Prediction; Design for Moore's Law; Hierarchy of Memories; Abstraction to Simplify Design; Make the Common Case Fast; and Dependability via Redundancy Includes a full set of updated and improved exercises
Download or read book Collection of Technical Papers on Structures and Materials written by and published by . This book was released on 1969 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Application of Lightweighting Technology to Military Aircraft Vessels and Vehicles written by National Research Council and published by National Academies Press. This book was released on 2012-04-27 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweighting is a concept well known to structural designers and engineers in all applications areas, from laptops to bicycles to automobiles to buildings and airplanes. Reducing the weight of structures can provide many advantages, including increased energy efficiency, better design, improved usability, and better coupling with new, multifunctional features. While lightweighting is a challenge in commercial structures, the special demands of military vehicles for survivability, maneuverability and transportability significantly stress the already complex process. Application of Lightweighting Technology to Military Vehicles, Vessels, and Aircraft assesses the current state of lightweighting implementation in land, sea, and air vehicles and recommends ways to improve the use of lightweight materials and solutions. This book considers both lightweight materials and lightweight design; the availability of lightweight materials from domestic manufacturers; and the performance of lightweight materials and their manufacturing technologies. It also considers the "trade space"-that is, the effect that use of lightweight materials or technologies can have on the performance and function of all vehicle systems and components. This book also discusses manufacturing capabilities and affordable manufacturing technology to facilitate lightweighting. Application of Lightweighting Technology to Military Vehicles, Vessels, and Aircraft will be of interest to the military, manufacturers and designers of military equipment, and decision makers.
Download or read book Mediterranean Architecture and the Green Digital Transition written by Ali Sayigh and published by Springer Nature. This book was released on 2023-10-09 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers presented during the World Renewable Energy Network’s biannual World Med Green Forum (MGF). The 2022 MGF highlights the role of renewable energy applications in the sustainable building sector with a focus on the Mediterranean region as a foundation for a truly positive energy future. MGF is an open roundtable for an international community of researchers, practitioners, and experts to discuss the most innovative and promising sustainable building technologies. The papers presented explore the intersection between twin transitions in policies, programs, projects, and experimentation, with the digital domain innovating the green building sector towards more reliable and inclusive planning and design practices in order to collectively envision future buildings and cities.
Download or read book Computer Organization and Design written by David A. Patterson and published by Elsevier. This book was released on 2012 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rev. ed. of: Computer organization and design / John L. Hennessy, David A. Patterson. 1998.
Download or read book Proceedings of the 8th International Conference on Civil Engineering written by Eric Strauss and published by Springer Nature. This book was released on with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Software Reliability Handbook written by Rook and published by Springer Science & Business Media. This book was released on 1990-03-31 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability of software is becoming increasingly important to a large range of industries that rely on complex computer systems and machinery with computer control. The reliability of a system depends on both the hardware and the software that comprise the system. Although faults in design can continue to give problems, the issues and the techniques for meeting severe reliability requirements in hardware have been understood for some time. In the case of software both the techniques and a positive attitude of software developers to the achievement of reliability are much less well established. They are particularly crucial in the development of software dependent safety-critical systems.
