Download or read book Structural Cross Sections written by Naveed Anwar and published by Butterworth-Heinemann. This book was released on 2016-11-08 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Cross Sections: Analysis and Design provides valuable information on this key subject covering almost all aspects including theoretical formulation, practical analysis and design computations, various considerations and issues related to cross-sectional behavior, and computer applications for determination of cross-sectional response. The presented approach can handle all complex shapes, material behaviors and configurations. The book starts with a clear and rigorous overview of role of cross-sections and their behavior in overall structural design process. Basic aspects of structural mechanics are reviewed and procedures to determine basic cross-sectional properties, stress and strain distributions, stress resultants and other response parameters, are provided. A brief discussion about the role of material behavior in cross-sectional response is also included. The unified and integrated approach to determine axial-flexural capacity of cross-sections is utilized in development of P-M and M-M interaction diagrams of cross-sections of various shapes. The behavior and design of cross-sections subjected to shear and torsion is also included with emphasis on reinforced concrete sections. Several detailed flow charts are included to demonstrate the procedures used in ACI, BS and Euro codes for design of cross-section subjected to shear and torsion, followed by solved examples. The book also presents the discussion about various factors that can lead to ductile response of cross-sections, especially those made of reinforced concrete. The definition and development of action-deformation curves especially moment-curvature (-) curve is discussed extensively. Various factors such as confinement, rebar distribution and axial load effect on the ductility are shown through examples. The use of moment-curvature curve to compute various section response parameters is also explained though equations and examples. Several typical techniques and materials for retrofitting of cross-sections of reinforced concrete beams, columns and slabs etc. are reviewed. A brief discussion of various informative references related to the evaluation and retrofitting of structures is included for practical applications. Towards the end, the book provides an overview of various software applications available for cross-section design and analysis. A framework for the development of a general-purpose cross-section analysis software, is presented and various features of few commercially available software packages are compared using some example cross-sections.
Download or read book The Encyclopedia of Field and General Geology written by Charles W. Finkl and published by Springer Science & Business Media. This book was released on 1988-04-30 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field work, supplemented by laboratory studies, is a cornerstone for the geological sciences. This volume provides an introduction to general field work through selected topics that illustrate specific techniques and methodologies. One hundred and twenty-three main entries prepared by leading authorities from around the world deal with aspects of exploration surveys, geotechnical engineering, environmental management. field techniques, mapping, prospecting, and mining. Special efforts were made to include topics that consider aspects of environmental geology in particular those subjects that involve field inspections related to, for example, the placement of artificial fills, sediment control in canals and waterways, the geologic effects of cities, or the importance of expansive soils to environmental management and engineering. In addition, some widely ranging topics dealing with legal affairs, geological methodology, the scope and organization of geology, report writing, and other concepts, such as those related to plate tectonics and continental drift, provide a necessary perspective to the arena of field geology.
Download or read book Bridge Design written by António J. Reis and published by John Wiley & Sons. This book was released on 2019-06-17 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to bridge design Bridge Design - Concepts and Analysis provides a unique approach, combining the fundamentals of concept design and structural analysis of bridges in a single volume. The book discusses design solutions from the authors’ practical experience and provides insights into conceptual design with concrete, steel or composite bridge solutions as alternatives. Key features: Principal design concepts and analysis are dealt with in a unified approach. Execution methods and evolution of the static scheme during construction are dealt with for steel, concrete and composite bridges. Aesthetics and environmental integration of bridges are considered as an issue for concept design. Bridge analysis, including modelling and detail design aspects, is discussed for different bridge typologies and structural materials. Specific design verification aspects are discussed on the basis of present design rules in Eurocodes. The book is an invaluable guide for postgraduate students studying bridge design, bridge designers and structural engineers.
Download or read book Structural Cross Sections Tertiary Formations Texas Gulf Coast written by M. M. Dodge and published by . This book was released on 1981 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3 D Structural Geology written by Richard H. Groshong and published by Springer Science & Business Media. This book was released on 2006-07-09 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes new material, in particular examples of 3-D models and techniques for using kinematic models to predict fault and ramp-anticline geometry. The book is geared toward the professional user concerned about the accuracy of an interpretation and the speed with which it can be obtained from incomplete data. Numerous analytical solutions are given that can be easily implemented with a pocket calculator or a spreadsheet.
Download or read book Balanced Geological Cross sections written by Nicholas B. Woodward and published by . This book was released on 1989 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geologic Cross Sections written by C.S. Langstaff and published by Springer. This book was released on 1981-01-31 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book accompanies a videotape program of the same name. The combined videotape and book, referred to as a module of instruction, was one of three prepared by IHRDC on a joint basis with Mobil Oil Corporation during 1980. The three modules, one each in geology, geophysics and petroleum engineering, were produced to determine whether this medium of instruction would provide an effective way of teaching recent graduates and those individuals changing specialties, "what they need to know, when they need to know it." The major observations Of the pilot production stage were that properly designed and properly used, video-assisted instruction is effective, effiCient, and convenient. With the confidence that this instructional medium provides one way for the interna tional petroleum industry to train young graduates in exploration and production, IHRDC sought financial and advisory support from a limited number Of companies to undertake the development of the BaSiC Technical Video Library for the E&P Specialist. To date the following companies have agreed to serve as Sponsors: Mobil, AGIP, ARAMCO, Cities Services, Dome Petroleum Ltd., Gulf, Phillips, Standard Oil of California/ Chevron, and Texaco.
Download or read book Structural Mechanics written by Einar N. Strømmen and published by Springer Nature. This book was released on 2020-05-25 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text book covers the principles and methods of load effect calculations that are necessary for engineers and designers to evaluate the strength and stability of structural systems. It contains the mathematical development from basic assumptions to final equations ready for practical use. It starts at a basic level and step by step it brings the reader up to a level where the necessary design safety considerations to static load effects can be performed, i.e. to a level where cross sectional forces and corresponding stresses can be calculated and compared to the strength of the system. It contains a comprehensive coverage of elastic buckling, providing the basis for the evaluation of structural stability. It includes general methods enabling designers to calculate structural displacements, such that the system may fulfil its intended functions. It is taken for granted that the reader possess good knowledge of calculus, differential equations and basic matrix operations. The finite element method for line-like systems has been covered, but not the finite element method for shells and plates.
Download or read book Structural Cross Sections Miocene Series Texas Continental Shelf written by Robert A. Morton and published by . This book was released on 1985 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Outline of Balanced Cross sections written by Nicholas B. Woodward and published by . This book was released on 1985 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Analysis of Structural Cross section Methods written by Katherine Louise Edmond and published by . This book was released on 1967 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geological Objects and Structures in 3D written by Dominique Frizon de Lamotte and published by CRC Press. This book was released on 2020-09-30 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geologists must be able to “read” a geological map. That means interpreting the vertical dimension through the 2D view represented on the map and at different scales. The main objective of this book is to help students during this difficult learning process. Based on an abundant iconography (field photos, maps, cross-sections) and on basics in mathematics and mechanics, the book dissects the geometry of emblematic geological structures and objects in order to build 3 D models, printable in 3D. The book is dedicated to structural geology with a particular emphasis on kinematics of faulting and folding and on salt tectonics (chapters III, IV and V). The origin of continental great unconformities and oceanic break-up unconformities is also discussed (chapter II). The audience of the book is broad and includes (under)graduate students in Earth Sciences, professors of Natural Sciences, and professional or amateur geologists.
Download or read book Handbook of Tunnel Engineering II written by Bernhard Maidl and published by John Wiley & Sons. This book was released on 2014-01-22 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnel engineering is one of the oldest, most interesting but also challenging engineering disciplines and demands not only theoretical knowledge but also practical experience in geology, geomechanics, structural design, concrete construction, machine technology, construction process technology and construction management. The two-volume "Handbuch des Tunnel- und Stollenbaus" has been the standard reference work for German-speaking tunnellers in theory and practice for 30 years. The new English edition is based on a revised and adapted version of the third German edition and reflects the latest state of knowledge. The book is published in two volumes, with the second volume covering both theoretical themes like design basics, geological engineering, structural design of tunnels and monitoring instrumentation, and also the practical side of work on the construction site such as dewatering, waterproofing and scheduling as well as questions of tendering, award and contracts, data management and process controlling. As with volume I, all chapters include practical examples.
Download or read book Problems and Solutions in Structural Geology and Tectonics written by and published by Elsevier. This book was released on 2019-02-26 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems and Solutions in Structural Geology and Tectonics, Volume 5, in the series Developments in Structural Geology and Tectonics, presents students, researchers and practitioners with an all-new set of problems and solutions that structural geologists and tectonics researchers commonly face. Topics covered include ductile deformation (such as strain analyses), brittle deformation (such as rock fracturing), brittle-ductile deformation, collisional and shortening tectonics, thrust-related exercises, rift and extensional tectonics, strike slip tectonics, and cross-section balancing exercises. The book provides a how-to guide for students of structural geology and geologists working in the oil, gas and mining industries. Provides practical solutions to industry-related issues, such as well bore stability Allows for self-study and includes background information and explanation of research and industry jargon Includes full color diagrams to explain 3D issues
Download or read book Structural Analysis and Synthesis written by Stephen M. Rowland and published by John Wiley & Sons. This book was released on 2013-05-06 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This widely used, highly readable introduction to structural analysis is specifically designed to support the laboratory work of undergraduates in structural geology courses. The new third edition includes: New and amended exercises and redrafted figures to improve clarity A single fold-out map of the Bree Creek Quadrangle – a mythical site used to help students analyze various aspects of the geologic structures exposed within this quadrangle and ultimately to develop a grand synthesis A user-friendly spiral binding ideal for work in the lab or out in the field An Instructor manual CD-ROM for this title is available. Please contact our Higher Education team at [email protected] for more information.
Download or read book Steel Design 1 Structural Basics written by H. H. Snijder and published by John Wiley & Sons. This book was released on 2020-07-21 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the design and analysis of steel structures for buildings according to EN 1990 (Eurocode 0), EN 1991 (Eurocode 1) and EN 1993 (Eurocode 3). Chapter 1 describes the theory and background of EN 1990 in terms of structural safety, reliability and the design values of resistances and actions. Chapter 2 deals with actions and deformations described in EN 1991. The permanent loads and vari¬able actions and in particular the imposed loads and the snow loads and wind actions are discussed. This chapter also contains three worked examples to determine the actions on a floor in a residential house, the actions on a free-standing platform canopy at a station and the wind actions on the façades of an office building. Chapter 3 is about modelling, discussing the schematisation of the structural system, the joints and the material properties as well as the cross-section properties. Chapter 4 deals with the classification of frames and the various analysis methods for unbraced and braced frames. Chapter 5 then goes deeper into these analysis methods to determine the force distribution and defor¬mations. Chapter 6 deals with the assessment by code-checking of (parts of) the steel structure with EN 1993-1-1 and EN 1993-1-8. At a basic level, the assessment of the resistance of cross-sections, the stability of members under axial forces and the resistance of bolted and welded connections are explained. Chapter 7 discusses in an extensive way the assessment by code-checking of the resistance of cross-sections, both for single and combined internal forces. The principles of the assessment of the resistance of cross-sections according to elastic and plastic theory are also discussed.
Download or read book Structural Analysis written by O. A. Bauchau and published by Springer Science & Business Media. This book was released on 2009-08-03 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors and their colleagues developed this text over many years, teaching undergraduate and graduate courses in structural analysis courses at the Daniel Guggenheim School of Aerospace Engineering of the Georgia Institute of Technology. The emphasis is on clarity and unity in the presentation of basic structural analysis concepts and methods. The equations of linear elasticity and basic constitutive behaviour of isotropic and composite materials are reviewed. The text focuses on the analysis of practical structural components including bars, beams and plates. Particular attention is devoted to the analysis of thin-walled beams under bending shearing and torsion. Advanced topics such as warping, non-uniform torsion, shear deformations, thermal effect and plastic deformations are addressed. A unified treatment of work and energy principles is provided that naturally leads to an examination of approximate analysis methods including an introduction to matrix and finite element methods. This teaching tool based on practical situations and thorough methodology should prove valuable to both lecturers and students of structural analysis in engineering worldwide. This is a textbook for teaching structural analysis of aerospace structures. It can be used for 3rd and 4th year students in aerospace engineering, as well as for 1st and 2nd year graduate students in aerospace and mechanical engineering.