Download or read book Structural Control and Fault Detection of Wind Turbine Systems written by Hamid Reza Karimi and published by . This book was released on 2018 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid growth of wind energy worldwide, challenges in the operation and control of wind turbine systems are becoming increasingly important. These affect all parts of the system, and require an integrated approach to optimize safety, cost, integrity and survivability of the system, while retaining the desired performance quality. This book conveys up to date theoretical and practical techniques applicable to the control of wind turbine systems. Topics covered include wave loads on monopole-supported offshore wind turbines; numerical and experimental tools for small wind turbine load analysis; structural control concepts for load reduction of offshore wind turbines; towards farm-level health management of wind turbine systems; data-based approaches to the monitoring of wind turbines; fault diagnostics for electrically operated pitch systems in offshore wind turbines; an emulator prototype design for vibration control of magnetic bearings for wind turbine power generator shafts; condition monitoring and diagnostics of wind turbine power trains; and robust fuzzy fault tolerant control wind energy systems subject to actuator and sensor faults.

Download or read book Fault Diagnosis and Sustainable Control of Wind Turbines written by Silvio Simani and published by Butterworth-Heinemann. This book was released on 2018-01-02 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Sustainable Control of Wind Turbines: Robust Data-Driven and Model-Based Strategies discusses the development of reliable and robust fault diagnosis and fault-tolerant (‘sustainable’) control schemes by means of data-driven and model-based approaches. These strategies are able to cope with unknown nonlinear systems and noisy measurements. The book also discusses simpler solutions relying on data-driven and model-based methodologies, which are key when on-line implementations are considered for the proposed schemes. The book targets both professional engineers working in industry and researchers in academic and scientific institutions. In order to improve the safety, reliability and efficiency of wind turbine systems, thus avoiding expensive unplanned maintenance, the accommodation of faults in their early occurrence is fundamental. To highlight the potential of the proposed methods in real applications, hardware–in–the–loop test facilities (representing realistic wind turbine systems) are considered to analyze the digital implementation of the designed solutions. The achieved results show that the developed schemes are able to maintain the desired performances, thus validating their reliability and viability in real-time implementations. Different groups of readers—ranging from industrial engineers wishing to gain insight into the applications' potential of new fault diagnosis and sustainable control methods, to the academic control community looking for new problems to tackle—will find much to learn from this work. Provides wind turbine models with varying complexity, as well as the solutions proposed and developed by the authors Addresses in detail the design, development and realistic implementation of fault diagnosis and fault tolerant control strategies for wind turbine systems Addresses the development of sustainable control solutions that, in general, do not require the introduction of further or redundant measurements Proposes active fault tolerant ('sustainable') solutions that are able to maintain the wind turbine working conditions with gracefully degraded performance before required maintenance can occur Presents full coverage of the diagnosis and fault tolerant control problem, starting from the modeling and identification and finishing with diagnosis and fault tolerant control approaches Provides MATLAB and Simulink codes for the solutions proposed

Download or read book Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems written by Monia Ben Khader Bouzid and published by John Wiley & Sons. This book was released on 2023-09-01 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy conversion systems are subject to many different types of faults and therefore fault detection is highly important to ensure reliability and safety. Monitoring systems can help to detect faults before they result in downtime. This book presents efficient methods used to detect electrical and mechanical faults based on electrical signals occurring in the different components of a wind energy conversion system. For example, in a small and high power synchronous generator and multi-phase generator, in the diode bridge rectifier, the gearbox and the sensors. This book also presents a method for keeping the frequency and voltage of the power grid within an allowable range while ensuring the continuity of power supply in the event of a grid fault. Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems presents original results obtained from a variety of research. It will not only be useful as a guideline for the conception of more robust wind turbines systems, but also for engineers monitoring wind turbines and researchers

Download or read book Wind Turbine Control and Monitoring written by Ningsu Luo and published by . This book was released on 2014-09-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Prognostics and Health Management in Power Energy Systems written by Dong Wang and published by MDPI. This book was released on 2019-11-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of preparing an Energies Special Issue on “Structural Prognostics and Health Management in Power & Energy Systems” is to compile information on the recent advances in structural prognostics and health management (SPHM). Continued improvements on SPHM have been made possible through advanced signature analysis, performance degradation assessment, as well as accurate modeling of failure mechanisms by introducing advanced mathematical approaches/tools. Through combining deterministic and probabilistic modeling techniques, research on SPHM can provide assurance for new structures at a design stage and ensure construction integrity at a fabrication phase. Specifically, power and energy system failures occur under multiple sources of uncertainty/variability resulting from load variations in usage, material properties, geometry variations within tolerances, and other uncontrolled variations. Thus, advanced methods and applications for theoretical, numerical, and experimental contributions that address these issues on SPHM are desired and expected, which attempt to prevent overdesign and unnecessary inspection and provide tools to enable a balance between safety and economy to be achieved. This Special Issue has attracted submissions from China, USA, Portugal, and Italy. A total of 26 submissions were received and 11 articles finally published.

Download or read book Wind Turbine Control and Monitoring written by Ningsu Luo and published by Springer. This book was released on 2014-08-30 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximizing reader insights into the latest technical developments and trends involving wind turbine control and monitoring, fault diagnosis, and wind power systems, ‘Wind Turbine Control and Monitoring’ presents an accessible and straightforward introduction to wind turbines, but also includes an in-depth analysis incorporating illustrations, tables and examples on how to use wind turbine modeling and simulation software. Featuring analysis from leading experts and researchers in the field, the book provides new understanding, methodologies and algorithms of control and monitoring, computer tools for modeling and simulation, and advances the current state-of-the-art on wind turbine monitoring and fault diagnosis; power converter systems; and cooperative & fault-tolerant control systems for maximizing the wind power generation and reducing the maintenance cost. This book is primarily intended for researchers in the field of wind turbines, control, mechatronics and energy; postgraduates in the field of mechanical and electrical engineering; and graduate and senior undergraduate students in engineering wishing to expand their knowledge of wind energy systems. The book will also interest practicing engineers dealing with wind technology who will benefit from the comprehensive coverage of the theoretic control topics, the simplicity of the models and the use of commonly available control algorithms and monitoring techniques.

Download or read book Variable Structure Control of Complex Systems written by Xing-Gang Yan and published by Springer. This book was released on 2016-12-05 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematizes recent research work on variable-structure control. It is self-contained, presenting necessary mathematical preliminaries so that the theoretical developments can be easily understood by a broad readership. The text begins with an introduction to the fundamental ideas of variable-structure control pertinent to their application in complex nonlinear systems. In the core of the book, the authors lay out an approach, suitable for a large class of systems, that deals with system uncertainties with nonlinear bounds. Its treatment of complex systems in which limited measurement information is available makes the results developed convenient to implement. Various case-study applications are described, from aerospace, through power systems to river pollution control with supporting simulations to aid the transition from mathematical theory to engineering practicalities. The book addresses systems with nonlinearities, time delays and interconnections and considers issues such as stabilization, observer design, and fault detection and isolation. It makes extensive use of numerical and practical examples to render its ideas more readily absorbed. Variable-Structure Control of Complex Systems will be of interest to academic researchers studying control theory and its application in nonlinear, time-delayed an modular large-scale systems; the robustness of its approach will also be attractive to control engineers working in industries associate with aerospace, electrical and mechanical engineering.

Download or read book Advances in Principal Component Analysis written by Ganesh R. Naik and published by Springer. This book was released on 2017-12-11 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the latest advances in concepts and further developments of principal component analysis (PCA), addressing a number of open problems related to dimensional reduction techniques and their extensions in detail. Bringing together research results previously scattered throughout many scientific journals papers worldwide, the book presents them in a methodologically unified form. Offering vital insights into the subject matter in self-contained chapters that balance the theory and concrete applications, and especially focusing on open problems, it is essential reading for all researchers and practitioners with an interest in PCA.

Download or read book Advances in Maritime Technology and Engineering written by Carlos Guedes Soares and published by CRC Press. This book was released on 2024-05-08 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Maritime Technology and Engineering comprises a collection of the papers presented at the 7th International Conference on Maritime Technology and Engineering (MARTECH 2024) held in Lisbon, Portugal, on 14-16 May 2024. This Conference has evolved from the series of biannual national conferences in Portugal, which have become an international event, reflecting the internationalization of the maritime sector and its activities. MARTECH 2024 is the seventh of this new series of biannual conferences. This book comprises 142 contributions that were reviewed by an International Scientific Committee. Advances in Maritime Technology and Engineering is dedicated to maritime transportation, ports as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair. The Proceedings in Marine Technology and Ocean Engineering series is dedicated to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of “Marine Technology and Ocean Engineering”. The series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The “Marine Technology and Ocean Engineering” series is also open to new conferences that cover topics on the sustainable exploration of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and is resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Download or read book Numerical Simulation of Wind Turbines written by Alessandro Bianchini and published by MDPI. This book was released on 2021-09-10 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains the research contributions belonging to the Special Issue "Numerical Simulation of Wind Turbines", published in 2020-2021. They consist of 15 original research papers and 1 editorial. Different topics are discussed, from innovative design solutions for large and small wind turbine to control, from advanced simulation techniques to noise prediction. The variety of methods used in the research contributions testifies the need for a holistic approach to the design and simulation of modern wind turbines and will be able to stimulate the interest of the wind energy community.

Download or read book Smart Civil Structures written by You-Lin Xu and published by CRC Press. This book was released on 2017-04-11 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: A smart civil structure integrates smart materials, sensors, actuators, signal processors, communication networks, power sources, diagonal strategies, control strategies, repair strategies, and life-cycle management strategies. It should function optimally and safely in its environment and maintain structural integrity during strong winds, severe earthquakes, and other extreme events. This book extends from the fundamentals to the state-of-the-art. It covers the elements of smart civil structures, their integration, and their functions. The elements consist of smart materials, sensors, control devices, signal processors, and communication networks. Integration refers to multi-scale modelling and model updating, multi-type sensor placement, control theory, and collective placement of control devices and sensors. And the functions include structural health monitoring, structural vibration control, structural self-repairing, and structural energy harvesting, with emphasis on their synthesis to form truly smart civil structures. It suits civil engineering students, professionals, and researchers with its blend of principles and practice.

Download or read book Sensor Networks in Structural Health Monitoring From Theory to Practice written by Eleni Chatzi and published by MDPI. This book was released on 2021-05-05 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intense development of novel data-driven and hybrid methods for structural health monitoring (SHM) has been demonstrated by field deployments on large-scale systems, including transport, wind energy, and building infrastructure. The actionability of SHM as an essential resource for life-cycle and resilience management is heavily dependent on the advent of low-cost and easily deployable sensors Nonetheless, in optimizing these deployments, a number of open issues remain with respect to the sensing side. These are associated with the type, configuration, and eventual processing of the information acquired from these sensors to deliver continuous behavioral signatures of the monitored structures. This book discusses the latest advances in the field of sensor networks for SHM. The focus lies both in active research on the theoretical foundations of optimally deploying and operating sensor networks and in those technological developments that might designate the next generation of sensing solutions targeted for SHM. The included contributions span the complete SHM information chain, from sensor design to configuration, data interpretation, and triggering of reactive action. The featured papers published in this Special Issue offer an overview of the state of the art and further proceed to introduce novel methods and tools. Particular attention is given to the treatment of uncertainty, which inherently describes the sensed information and the behavior of monitored systems.

Download or read book Wind Turbine Technology written by Muyiwa Adaramola and published by CRC Press. This book was released on 2014-02-24 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title includes a number of Open Access chapters. This important book presents a selection of new research on wind turbine technology, including aerodynamics, generators and gear systems, towers and foundations, control systems, and environmental issues. This informative book: • Introduces the principles of wind turbine design • Presents methods for analysis of wind turbine performance • Discusses approaches for wind turbine improvement and optimization • Covers fault detection in wind turbines • Describes mediating the adverse effects of wind turbine use and installation

Download or read book Offshore Wind Energy Technology written by Olimpo Anaya-Lara and published by John Wiley & Sons. This book was released on 2018-05-11 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: A COMPREHENSIVE REFERENCE TO THE MOST RECENT ADVANCEMENTS IN OFFSHORE WIND TECHNOLOGY Offshore Wind Energy Technology offers a reference based on the research material developed by the acclaimed Norwegian Research Centre for Offshore Wind Technology (NOWITECH) and material developed by the expert authors over the last 20 years. This comprehensive text covers critical topics such as wind energy conversion systems technology, control systems, grid connection and system integration, and novel structures including bottom-fixed and floating. The text also reviews the most current operation and maintenance strategies as well as technologies and design tools for novel offshore wind energy concepts. The text contains a wealth of mathematical derivations, tables, graphs, worked examples, and illustrative case studies. Authoritative and accessible, Offshore Wind Energy Technology: Contains coverage of electricity markets for offshore wind energy and then discusses the challenges posed by the cost and limited opportunities Discusses novel offshore wind turbine structures and floaters Features an analysis of the stochastic dynamics of offshore/marine structures Describes the logistics of planning, designing, building, and connecting an offshore wind farm Written for students and professionals in the field, Offshore Wind Energy Technology is a definitive resource that reviews all facets of offshore wind energy technology and grid connection.

Download or read book Vibration Based Condition Monitoring of Wind Turbines written by Tomasz Barszcz and published by Springer. This book was released on 2018-12-04 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail different types of vibration signals and the signal processing methods, including signal resampling and signal envelope, used for condition monitoring of drivetrains. A special emphasis is placed on wind turbines and on the fact that they work in highly varying operational conditions. The core of the book is devoted to cutting-edge methods used to validate and process vibration data in these conditions. Key case studies, where advanced signal processing methods are used to detect failures of gearboxes and bearings of wind turbines, are described and discussed in detail. Vibration sensors, SCADA (Supervisory Control and Data Acquisition), portable data analyzers and online condition monitoring systems, are also covered. This book offers a timely guide to both researchers and professionals working with wind turbines (but also other machines), and to graduate students willing to extend their knowledge in the field of vibration analysis.

Download or read book Structural Health Monitoring from Sensing to Processing written by Magd Abdel Wahab and published by BoD – Books on Demand. This book was released on 2018-09-26 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring (SHM) has attracted more attention during the last few decades in many engineering fields with the main aim of avoiding structural disastrous events. This aim is achieved by using advanced sensing techniques and further data processing. SHM has experienced booming advancements during recent years due to the developments in sensing techniques. The reliable operation of current, sophisticated, man-made structures drives the development of incipient reliable damage diagnosis and assessment. This book aims to illustrate the background and applications of SHM from both sensing and processing approaches. Its main objective is to summarize the advantages and disadvantages of SHM methodologies and their applications, which may provide a new perspective in understanding SHM for readers from diverse engineering fields.

Download or read book Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems written by Monia Ben Khader Bouzid and published by John Wiley & Sons. This book was released on 2023-10-10 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy conversion systems are subject to many different types of faults and therefore fault detection is highly important to ensure reliability and safety. Monitoring systems can help to detect faults before they result in downtime. This book presents efficient methods used to detect electrical and mechanical faults based on electrical signals occurring in the different components of a wind energy conversion system. For example, in a small and high power synchronous generator and multi-phase generator, in the diode bridge rectifier, the gearbox and the sensors. This book also presents a method for keeping the frequency and voltage of the power grid within an allowable range while ensuring the continuity of power supply in the event of a grid fault. Electrical and Mechanical Fault Diagnosis in Wind Energy Conversion Systems presents original results obtained from a variety of research. It will not only be useful as a guideline for the conception of more robust wind turbines systems, but also for engineers monitoring wind turbines and researchers