Download or read book Constructing Landscape written by Astrid Zimmermann and published by Birkhaüser. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a systematic introduction to technical and constructional open space planning, with all the relevant topics covered, from the most common materials and surfaces to the construction of open space elements and the use of plants. The text is supported by over 1200 photographs, illustrations and plans.
Download or read book Adhesive Joining of Structural Components written by Alessandro Pegoretti and published by SAE International. This book was released on 2018-08-09 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesive bonding has been used in the manufacture of primary aircraft fuselage and wing structures by various constructors since 1945. By a proper design, adhesive bonding often helps in designing structures mechanically equivalent to or even stronger than conventional assemblies. Adhesive Joining of Structural Components: New Insights and Technologies introduces the reader to some recent progress involved in adhesive joining of structural components. The chapters, seminal SAE International technical papers, cover the most recent advances in adhesive materials, surface preparation and controls, innovative bonding technologies, hybrid bonded/bolted joints, non-destructive testing and failure modelling of adhesively bonded joints. Edited by Dr. Alessandro Pegoretti, Professor of Materials Science and Technology at the University of Trento, Italy, Adhesive Joining of Structural Components: New Insights and Technologies is a must-read resource for those interested in the field of adhesive joining of structural components, which will assume an increasingly important role in designing and manufacturing lightweight structures. In fact, recent advancements in adhesives, methods for surface preparation and control, bonding technologies, non-destructive testing and modelling of failure mechanisms will certainly contribute to revitalize this relatively "mature" assembling technique.
Download or read book Health Monitoring of Structural Materials and Components written by Douglas Adams and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first complete introduction to health monitoring, encapsulating both technical information and practical case studies spanning the breadth of the subject. Written by a highly-respected figure in structural health monitoring, this book provides readers with the technical skills and practical understanding required to solve new problems encountered in the emerging field of health monitoring. The book presents a suite of methods and applications in loads identification (usage monitoring), in-situ damage identification (diagnostics), and damage and performance prediction (prognostics). Concepts in modelling, measurements, and data analysis are applied through real-world case studies to identify loading, assess damage, and predict the performance of structural components, as well as examine engine components, automotive accessories, aircraft parts, spacecraft components, civil structures and defence system components. In particular the book: provides the reader with a fundamental and practical understanding of the material; discusses models demonstrating the physical basis for health monitoring techniques; gives a detailed review of the best practices in dynamic measurements including sensing; presents numerous data analysis techniques using model- and signal-based methods; discusses case studies involving real-world applications of health monitoring; offers end-of-chapter problems to enhance the study of the topic for students and instructors; and includes an accompanying website with MATLAB programs providing hands-on training to readers for writing health monitoring model simulation and data analysis algorithms. Health Monitoring of Structural Materials and Components is an excellent introductory text for newcomers to the subject as well as an excellent study tool for students and lecturers. Practitioners and researchers, those with a greater understanding and application of the technical skills involved, will also find this essential reading as a reference text to address current and future challenges in this field. The wide variety of case studies will appeal to a broad spectrum of engineers in the aerospace, civil, mechanical, machinery and defence communities.
Download or read book Developing Large Structural Parts for Railway Application Using a Fibre Reinforced Polymer Design written by Jan Prockat and published by Univerlagtuberlin. This book was released on 2005 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Structural Elements written by Chanakya Arya and published by CRC Press. This book was released on 2022-04-26 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of Design of Structural Elements: Concrete, Steelwork, Masonry and Timber Designs to Eurocodes is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry and composites. It provides design principles and guidance in line with Eurocodes, current as of 2021. Topics include the philosophy of design, sustainable development, basic structural concepts, and material properties. After an overview of structural design, the book contains self-contained chapters with numerous diagrams and worked examples on design in reinforced concrete, structural steelwork and steel/concrete composites, masonry and timber based on EN 1990-1997. Selected extracts from these publications assist familiarity. Elements considered cover reinforced concrete and composite floors, isolated foundation, cantilever retaining wall, load-bearing and panel walls, stud wall and connections. The text is ideal for student civil and structural engineers on degree and diploma courses, and also practising civil and structural engineers and other built environment professions. The online Support Materials for adopting course instructors includes an extensive set of solutions to the problems in the book and PowerPoint slides for use in lectures: www.routledge.com/9781032076317.
Download or read book Designing Structural Components for Machinery written by Larry J. Segerlind and published by . This book was released on 2010 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Analysis of Thermoplastic Components written by Gerald G. Trantina and published by McGraw Hill Professional. This book was released on 1994 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to predict thermoplastics behavior in high-performance structural applications Here's the very first engineering resource with all the data and design/analysis techniques you need to work with even the newest thermoplastics. Structural Analysis of Thermoplastic Components by Gerry Trantina and Ron Nimmer shows you how to predict stiffness, creep and fatigue of polymeric components--PLUS non-homogeneous materials such as structural foams and composites. You'll benefit from detailed comparisons of analytic prediction versus measured behavior and much more: Nonstandard property measurement and analysis; Nonlinearities associated with large deformations; Using structural geometry to offset low material stiffness; Designing thermoplastics to withstand impacts; Important loading variables, component lifetimes, frequency effects, hysteric heating and cyclic crack growth.
Download or read book Surface Integrity of Machined Structural Components written by William P. Koster and published by . This book was released on 1970 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A program has been run to evaluate the effects of different metal removal methods and variations of these methods on surface integrity. Three alloys were studied: beta rolled Ti-6Al-4V; AISI 4340, quenched and tempered, 50 Rc; and Inconel 718, solution treated and aged. Various grinding procedures caused the titanium alloy to exhibit a fatigue strength range of 13 to 62 ksi. The fatigue strength of 4340 due to grinding variables ranged from 62 to 102 ksi, while Inconel 718 showed a range of 24 to 60 ksi. Abusive grinding conditions always resulted in fatigue strengths at the minimum of these ranges. Milling variables exhibited a fatigue strength range of 32 to 72 ksi in the beta rolled titanium alloy. EDM and ECM on Inconel 718 yielded 22 and 39 ksi, respectively, compared to 60 ksi for gentle grinding. Guidelines for processing aerospace hardware considering surface integrity requirements are presented in the report.
Download or read book Design of Structural Elements written by William McKenzie and published by Bloomsbury Publishing. This book was released on 2013-04-19 with total page 1057 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic and well-respected textbook provides the most comprehensive coverage of the process of design for structural elements and features a wealth of practical problems and real-world examples. It introduces readers to the design requirements of the Eurocodes for the four most commonly used materials in construction: concrete, steel, timber and masonry, and illustrates the concepts and calculations necessary for the design of the most frequently encountered basic structural elements. It includes a detailed section on structural analysis. The scope of this text is wide, and its numerous examples, problems and easy-to-follow diagrams make it an ideal course text. This user-friendly text is an indispensable resource both for undergraduates in all years of civil engineering and structural engineering, in construction and architecture, and for practising engineers looking to refresh their knowledge.
Download or read book Structural Elements of the Nervous System written by Abel Lajtha and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neurochemistry, having the objective of elucidating biochemical processes subserving nervous activity, emerged as an application of chemistry to the of neurobiological problems as a post-World War II phenomenon. investigation However, only in the last 40 years has the chemical community recognized neurochemistry as a distinct, if hybrid, discipline. During this period great strides have been made. However, recently neurochemistry, along with neu rophysiology, neuropharmacology, neuroanatomy, and the behavioral sci ences, has emerged to form neuroscience, a new community of scientists with its own national society, journals, and meetings. Actually, this recently formed hybrid, neuroscience, is in the process of merging with another well-established discipline, molecular genetics (frequently called molecular biology, and itself a hybrid), which appears to have sufficient hybrid vigor to form yet a new community of scientists, which, for want of a more imaginative term, has been called molecular genetic neuroscience. Clearly, advantages resulting from such mergers or hybridizations accrue not only from the merging discipline (neurochemistry in this case) to the new community (molecular genetic neuroscience), but also in the reverse direction. This Foreword will be concerned primarily with examples of this latter process.
Download or read book Paper Honeycomb Sandwich Panels as Lightweight Structural Components written by Thomas W. Reichard and published by . This book was released on 1972 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paper presents a resume of current practice in the U.S. with regard to the use of sandwich panels in single-story buildings. A description and the properties of typical paper honeycomb cores are given. Some of the factors which are considered in choosing sandwich facings and adhesives are given.
Download or read book Introduction to Aircraft Structural Analysis written by T.H.G. Megson and published by Butterworth-Heinemann. This book was released on 2017-06-14 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Aircraft Structure Analysis, Third Edition covers the basics of structural analysis as applied to aircraft structures. Coverage of elasticity, energy methods and virtual work set the stage for discussions of airworthiness/airframe loads and stress analysis of aircraft components. Numerous worked examples, illustrations and sample problems show how to apply the concepts to realistic situations. As a self-contained guide, this value-priced book is an excellent resource for anyone learning the subject. Based on the author's best-selling text, Aircraft Structures for Engineering Students Contains expanded coverage of composite materials and structures“/li> Includes new practical and design-based examples and problems throughout the text Provides an online teaching and learning tool with downloadable MATLAB code, a solutions manual, and an image bank of figures from the book
Download or read book Structural Analysis and Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-04-19 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: As software skills rise to the forefront of design concerns, the art of structural conceptualization is often minimized. Structural engineering, however, requires the marriage of artistic and intuitive designs with mathematical accuracy and detail. Computer analysis works to solidify and extend the creative idea or concept that might have started o
Download or read book Corps of Engineers Structural Engineering Conference written by and published by . This book was released on 1996 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensing Issues in Civil Structural Health Monitoring written by Farhad Ansari and published by Springer Science & Business Media. This book was released on 2005-07-14 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil infrastructure systems are generally the most expensive assets in any country, and these systems are deteriorating at an alarming rate. In addition, these systems have a long service life in comparison to most other commercial products. As well, the introduction of intelligent materials and innovative design approaches in these systems is painfully slow due to heavy relianceon traditional construction and maintenance practices, and the conservative nature of design codes. Feedback on the "state of the health" of constructed systems is practically nonexistent. In the quest for lighter, stronger and corrosion-resistant structures, the replacement of ferrous materials by high-strength fibrous ones is being actively pursued in several countries around the world, both with respect to the design of new structures as well as for the rehabilitation and strengthening of existing ones. In North America, active research in the design of new highway bridges is focused on a number of specialty areas, including the replacement of steel reinforcing bars in concrete deck slabs by randomly distributed low-modulus fibers, and the replacement of steel prestressing cables for concrete components by tendons comprising super-strong fibers. Research is also being conducted on using FRPs to repair and strengthen existing structures.
Download or read book Structural Engineering Series written by United States. Federal Highway Administration and published by . This book was released on 1976 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fibrous Composites in Structural Design written by Edward M. Lenoe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth Conference on Fibrous Composites in Structural Design was a successor to the First-to-Third Conferences on Fibrous Composites in Flight Vehicle Design sponsored by the Air Force (First and Second Conferences, September 1973 and May 1974) and by NASA (Third Conference, November 1975) which were aimed at focusing national attention on flight vehicle applications of a new class of fiber reinforced materials, the advanced com posites, which afforded weight savings and other advantages which had not been previously available. The Fourth Conference, held at San Diego, California, 14-17 November 1978, was the fi rst of these conferences to be jointly sponsored by the Army, Navy and Ai r Force together with NASA, as well as being the first to give attention to non-aerospace applications of fiber reinforced composites. While the design technology for aerospace applications has reached a state of relative maturity, other areas of application such as mi litary bridging, flywheel energy storage systems, ship and surface vessel components and ground vehicle components are in an early stage of development, and it was an important objective to pinpoint where careful attention to structural design was needed in such applications to achfeve maximum structural performance payoff together with a high level of reliability and attractive economics.
