EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book STRUCTURAL ANALYSIS OF APT SUPERCONDUCTING CAVITIES

Download or read book STRUCTURAL ANALYSIS OF APT SUPERCONDUCTING CAVITIES written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Higher Order Mode Analysis of the APT Superconducting Cavities

Download or read book Higher Order Mode Analysis of the APT Superconducting Cavities written by and published by . This book was released on 1997 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: In another contribution to this conference the design of superconducting cavities for low velocity proton beams will be reported. Besides an optimization of the rf properties of the accelerating [pi]-mode, other modes, possibly excited by the traversing proton beam, need to be regarded. The full spectrum of modes in [beta] = 0.64 and [beta] = 0.82 5-cell cavities, as proposed for the Accelerator Production of Tritium (APT) facility, has been calculated up to frequencies higher than 2.0 GHz. These have been evaluated for their potential to affect the beam. The presence of {open_quotes}trapped{close_quotes} modes has also been investigated. In addition to the specific mode spectrum, the total power deposited into the cavities by the beam has been determined from the induced wake-fields. Due to the operation with beams below the velocity of light, extreme care was required to prevent incorrect results by wave reflections from the boundaries of the calculation volume. The simulations indicate that a power deposition of up to 17 W per cavity can be expected in the worst case. This power might have to be removed by higher order mode couplers, which is a technically feasible task. Transporting this power out to a room temperature dump does not even noticeably increase the requirements to the cryogenic system. Also for the prevention of beam break-up effects and for suppression of resonant excitation of specific higher order modes (HOMs) it is of interest to investigate the removal of this HOM-power. Different approaches to implement this removal technically are entertained.

Book Static and Dynamic Analysis of the APT Superconducting Cavities

Download or read book Static and Dynamic Analysis of the APT Superconducting Cavities written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Static and dynamic analysis of 4-, 6-, and 12-cell [beta]=0.428 niobium cavities proposed for the superconducting linac for the Accelerator Production of Tritium were carried out using COSMOS/M[copyright], a commercial finite-element code. The benefits of external stiffeners, the tuning sensitivities, and the mechanical resonant frequencies are reported.

Book Structural Analysis of Superconducting Accelerator Cavities

Download or read book Structural Analysis of Superconducting Accelerator Cavities written by and published by . This book was released on 2000 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The static and dynamic structural behavior of superconducting cavities for various projects was determined by finite element structural analysis. The [beta] = 0.61 cavity shape for the Neutron Science Project was studied in detail and found to meet all design requirements if fabricated from five millimeter thick material with a single annular stiffener. This 600 MHz cavity will have a Lorentz coefficient of -1.8 Hz/(Mv/meter)2 and a lowest structural resonance of more than 100 Hz. Cavities at [beta] = 0.48, 0.61, and 0.77 were analyzed for a Neutron Science Project concept which would incorporate 7-cell cavities. The medium and high beta cavities were found to meet all criteria but it was not possible to generate a [beta] = 0.48 cavity with a Lorentz coefficient of less than -3 Hz/(Mv/meter)2.

Book EPAC96

Download or read book EPAC96 written by S. Myers and published by . This book was released on 1996 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Computational Science     ICCS 2002

Download or read book Computational Science ICCS 2002 written by Peter M.A. Sloot and published by Springer. This book was released on 2003-08-01 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Science is the scientific discipline that aims at the development and understanding of new computational methods and techniques to model and simulate complex systems. The area of application includes natural systems - such as biology environ mental and geo-sciences, physics, and chemistry - and synthetic systems such as electronics and financial and economic systems. The discipline is a bridge bet ween 'classical' computer science - logic, complexity, architecture, algorithm- mathematics, and the use of computers in the aforementioned areas. The relevance for society stems from the numerous challenges that exist in the various science and engineering disciplines, which can be tackled by advances made in this field. For instance new models and methods to study environmental issues like the quality of air, water, and soil, and weather and climate predictions through simulations, as well as the simulation-supported development of cars, airplanes, and medical and transport systems etc. Paraphrasing R. Kenway (R.D. Kenway, Contemporary Physics. 1994): 'There is an important message to scientists, politicians, and industrialists: in the future science, the best industrial design and manufacture, the greatest medical progress, and the most accurate environmental monitoring and forecasting will be done by countries that most rapidly exploit the full potential of computational science'. Nowadays we have access to high-end computer architectures and a large range of computing environments, mainly as a consequence of the enormous sti mulus from the various international programs on advanced computing, e.g.

Book Engineering and Building RF Structures   the Works

Download or read book Engineering and Building RF Structures the Works written by and published by . This book was released on 2004 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The translation of the physics designs of linear accelerators into engineering and manufacturing requirements is discussed. The stages of conceptual design, prototyping, final design, construction, and installation are described for both superconducting (LANL [beta] = 0.175 Spoke Cavity) and normal-conducting (APT/LEDA 6.7 MeV RFQ) accelerators. An overview of codes which have linked accelerator cavity and thermal/structural analysis modules is provided. The linked RF/thermal/CFD/structural codes do work. Workers at laboratories throughout the world have been successful in predicting the thermal and structural performance of accelerator cavities using these codes. Use of these codes allows accurate prediction of resonant frequencies, Lorentz force de-tuning, tuning sensitivities and mechanical resonant frequencies. Most important, these codes allow cost-effective optimization of the cavity geometry and, for superconducting cavities, the location and shape of external stiffeners.

Book Structural Mechanics of Superconducting CH Cavities

Download or read book Structural Mechanics of Superconducting CH Cavities written by Michael Amberg and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Mechanical Study of Superconducting Parallel Bar Deflecting Crabbing Cavities

Download or read book Mechanical Study of Superconducting Parallel Bar Deflecting Crabbing Cavities written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The superconducting parallel-bar deflecting/crabbing cavities have improved properties compared to conventional cavity structures. It is currently being considered for number of applications. The mechanical design analysis is performed on two designs of the 499 MHz parallel-bar deflecting cavity for the Jefferson Lab 12 GeV upgrade. The main purpose of the mechanical study is to examine the structural stability of the cavities under the operating conditions in the accelerators. The study results will suggest the need for additional structural strengthening. Also the study results will help to develop a concept of the tuning method. If the cavity is to be installed in the accelerator it should satisfy a certain design parameters due to the safety requirements (for example, pressure system requirements) which are much severe condition than the actual operating condition.

Book DEVELOPMENTS OF 700 MHZ 5 CELL SUPERCONDUCTING CAVITIES FOR APT

Download or read book DEVELOPMENTS OF 700 MHZ 5 CELL SUPERCONDUCTING CAVITIES FOR APT written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We have manufactured a total of six [beta]=0.64, 700-MHz 5-cell cavities. The APT (Accelerator Production of Tritium) specification requires Q[sub 0]> 5 x 10[sup 9] at an accelerating field of 5 MV/m. So far, the results of vertical tests have shown maximum accelerating fields of 12 MV/m (peak surface field of 41 MV/m) and maximum low-field Q[sub 0] of 3.6 x 10[sup 10] at 2 K. The present limitations are available input power, field emission and quench. This type of cavities will also be used for an ADTF (Accelerator-Driven Test Facility) for AAA (Advanced Accelerator Applications) project.

Book Analysis of Performance Limitations for Superconducting Cavities

Download or read book Analysis of Performance Limitations for Superconducting Cavities written by Jean R. Delayen and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book NBS Special Publication

Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Publications of the National Bureau of Standards     Catalog

Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Computational Science   ICCS

Download or read book Computational Science ICCS written by and published by . This book was released on 2002 with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Energy Research Abstracts

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-10 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: