Download or read book Stringer Panel Models in Structural Concrete written by Johan Blaauwendraad and published by Springer. This book was released on 2018-06-26 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural concrete designers nowadays distinguish between B-regions (named after Bernoulli beam theory) and D-regions (D standing for ‘disturbed’). They are all familiar with B-regions, but less acquainted with the expertise required for D-regions. To design D-regions, the Strut-and-Tie Model (STM) is usually applied, a model laid down worldwide in structural codes of practice. The Stringer-Panel Model (SPM) recommended here is a companion method to the STM, with the advantage of being suitable for different load cases and reversed loading. This being so, the SPM is suitable for linear-elastic analyses where durability is a key consideration, but also suits structural design for contexts of cyclical seismic activity. Finally, this book sets out how structural engineers who prefer the STM can nevertheless apply the SPM to determine a proper strut-and-tie model.
Download or read book Structural Construction Conf written by Franco Bontempi and published by CRC Press. This book was released on 2003-01-01 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Objective of conference is to define knowledge and technologies needed to design and develop project processes and to produce high-quality, competitive, environment- and consumer-friendly structures and constructed facilities. This goal is clearly related to the development and (re)-use of quality materials, to excellence in construction management and to reliable measurement and testing methods.
Download or read book Baustatik Baupraxis 7 written by K. Meskouris and published by CRC Press. This book was released on 1999-01-01 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: 51 papers which succinctly describe the state of the art in the areas: Comptutational models and techniques; Structural dynamics; Innovative construction materials; Damage simulation and Durability. The papers show the application of innovative methods to practical situations. The spectrum of the single papers ranges from experimental and theoretical investigations of structures subject to dynamic loading (wind, earthquake, church bell ringing, explosions), FE analyses of non-linear structural behaviour, innovative design and analysis concepts for reinforced concrete and steel structures and safety assessment methods with explicit damage evaluation to complex building/foundation models, structural glass and textile span investigations for existing historical steel bridges and optimization aspects.
Download or read book High Tech Concrete Where Technology and Engineering Meet written by D.A. Hordijk and published by Springer. This book was released on 2017-06-08 with total page 2926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the fib Symposium “High Tech Concrete: Where Technology and Engineering Meet”, that was held in Maastricht, The Netherlands, in June 2017. This annual symposium was organised by the Dutch Concrete Association and the Belgian Concrete Association. Topics addressed include: materials technology, modelling, testing and design, special loadings, safety, reliability and codes, existing concrete structures, durability and life time, sustainability, innovative building concepts, challenging projects and historic concrete, amongst others. The fib (International Federation for Structural Concrete) is a not-for-profit association committed to advancing the technical, economic, aesthetic and environmental performance of concrete structures worldwide.
Download or read book 1st fib Congress in Osaka Japan Vol2 written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2002-01-01 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Structures written by Peter Marti and published by John Wiley & Sons. This book was released on 2013-03-20 with total page 997 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Werk liefert eine einheitliche Darstellung der Baustatik auf der Grundlage der Technischen Mechanik. Es behandelt Stab- und Flächentragwerke nach der Elastizitäts- und Plastizitätstheorie. Es betont den geschichtlichen Hintergrund und den Bezug zur praktischen Ingenieurtätigkeit und dokumentiert erstmals in umfassender Weise die spezielle Schule, die sich in den letzten 50 Jahren an der ETH in Zürich herausgebildet hat. Als Lehrbuch enthält das Werk viele durchgearbeitete Beispiele und Aufgaben zum vertieften Studium. Die einzelnen Kapitel werden durch Zusammenfassungen abgeschlossen, welche die wichtigsten Lehrinhalte in prägnanter Form hervorheben. Die verwendeten Fachausdrücke sind in einem Anhang definiert. Als Nachschlagewerk enthält das Buch ein umfassendes Stichwortverzeichnis. Die Gliederung des Inhalts und Hervorhebungen im Text erleichtern die Übersicht. Bezeichnungen, Werkstoff- und Querschnittswerte sowie Abrisse der Matrizenalgebra, der Tensorrechnung und der Variationsrechnung sind in Anhängen zusammengefasst. Insgesamt richtet sich das Buch als Grundlagenwerk an Studierende und Lehrende ebenso wie an Bauingenieure in der Praxis. Es bezweckt, seine Leser zu einer sinnvollen Modellierung und Behandlung von Tragwerken zu befähigen und sie bei den unter ihrer Verantwortung vorgenommenen Projektierungs- und Überprüfungsarbeiten von Tragwerken zu unterstützen.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1969 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Construction Conference written by Conference Editor and published by CRC Press. This book was released on 2003-01-01 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: Objective of conference is to define knowledge and technologies needed to design and develop project processes and to produce high-quality, competitive, environment- and consumer-friendly structures and constructed facilities. This goal is clearly related to the development and (re)-use of quality materials, to excellence in construction management and to reliable measurement and testing methods.
Download or read book System Based Vision For Strate written by Franco Bontempi and published by CRC Press. This book was released on 2003-01-01 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Objective of conference is to define knowledge and technologies needed to design and develop project processes and to produce high-quality, competitive, environment- and consumer-friendly structures and constructed facilities. This goal is clearly related to the development and (re)-use of quality materials, to excellence in construction management and to reliable measurement and testing methods.
Download or read book Discrete Elements and Nonlinearity in Design of Structural Concrete Walls written by Pierre C. J. Hoogenboom and published by . This book was released on 1998 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the First International Conference on Advances in Structural Engineering and Mechanics written by Chang-Koon Choi and published by . This book was released on 1999 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plates and FEM written by Johan Blaauwendraad and published by Springer Science & Business Media. This book was released on 2010-01-13 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Finite Element Method, shortly FEM, is a widely used computational tool in structural engineering. For basic design purposes it usually suf ces to apply a linear-elastic analysis. Only for special structures and for forensic investigations the analyst need to apply more advanced features like plasticity and cracking to account for material nonlinearities, or nonlinear relations between strains and displacements for geometrical nonlinearity to account for buckling. Advanced analysis techniques may also be necessary if we have to judge the remaining structural capacity of aging structures. In this book we will abstain from such special cases and focus on everyday jobs. Our goal is the worldwide everyday use of linear-elastic analysis, and dimensioning on basis of these elastic computations. We cover steel and concrete structures, though attention to structural concrete prevails. Structural engineers have access to powerful FEM packages and apply them intensively. Experience makes clear that often they do not understand the software that they are using. This book aims to be a bridge between the software world and structural engineering. Many problems are related to the correct input data and the proper interpretation and handling of output. The book is neither a text on the Finite Element Method, nor a user manual for the software packages. Rather it aims to be a guide to understanding and handling the results gained by such software. We purposely restrict ourselves to structure types which frequently occur in practise.
Download or read book Proceedings fib Symposium in Prague Vol1 Czech Republic written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 1999-10-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of a Ninety Foot Reinforced Concrete Girder Bridge written by Ernest L. Markley and published by . This book was released on 1922 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practitioners Guide to Finite Element Modelling of Reinforced Concrete Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-linear computer analysis methods have seen remarkable advancement in the last half-century. The state-of-the-art in non-linear finite element analysis of reinforced concrete has progressed to the point where such procedures are close to being practical, every-day tools for design office engineers. Non-linear computer analysis procedures can be used to provide reliable assessments of the strength and integrity of damaged or deteriorated structures, or of structures built to previous codes, standards or practices deemed to be deficient today. They can serve as valuable tools in assessing the expected behaviour from retrofitted structures, or in investigating and rationally selecting amongst various repair alternatives. fib Bulletin 45 provides an overview of current concepts and techniques relating to computer-based finite element modelling of structural concrete. It summarises the basic knowledge required for use of nonlinear analysis methods as applied to practical design, construction and maintenance of concrete structures, and attempts to provide a diverse and balanced portrayal of the current technical knowledge, recognizing that there are often competing and conflicting viewpoints. This report does not give advice on picking one model over another but, rather, provides guidance to designers on how to use existing and future models as tools in design practice, in benchmarking of their models against established and reliable test data and in selecting an appropriate safety factor as well as recognising various pitfalls. fib Bulletin 45 is intended for practicing engineers, and therefore focuses more on practical application and less on the subtleties of constitutive modelling.
Download or read book Computer Modelling of Concrete Structures written by Nenad Bićanić and published by . This book was released on 1994 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Reliability and Optimization of Structural Systems written by Dan M. Frangopol and published by CRC Press. This book was released on 2005-12-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains thirty-one papers presented at the Twelfth Scientific Meeting of the IFIP Working Group on Reliability and Optimization of Structural Systems which took place in Aalborg, Denmark, from May 22-25, 2005. The Working Group Conference was organized by the IFIP (International Federation for Information Processing) Working Group 7.5 of the Technical Committee on Modelling and Optimization. The purpose of the Working Group is to promote modern structural system reliability and optimization theory and its applications, to stimulate research, development and application of structural system reliability and optimization theory, to assist and advance research and development in these fields, to further the dissemination and exchange of information on reliability and optimization of structural systems, and to encourage education in structural system reliability and optimization theory.
