Download or read book Stressed Composite Structures written by A.G. Kolpakov and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanics of structures with initial stresses is a traditional part of structural mechanics. It is closely related to the important problem of stability of structures. The basic concepts of elastic stability of structures go back to works by Euler (1759) and Bryan (1889). Later, it was found that the problem of deformation of solids with initial stresses is related to variational principles and nonlinear problems in elasticity; see Trefftz (1933), Marguerre (1938), Prager (1947), Hill (1958), Washuzu (1982). Historical detail up to the 1940s can be found in the book by Timoshenko (1953). Observing the basic concepts of the traditional mechanics of stressed structures, we agree that these are suitable for uniform structural elements (plates, beams, and so on) made of homogeneous materials, but not for complex structures (such as a network plate or a lattice mast) or structures made of composite materials (such as fiber reinforced or textile materials). Many concepts of the classical theory, such as a cross section or neutral plane (axis), correspond to no mechanical objects if we consider an inhomogeneous structure. As a result, we come to the conclusion that it would be useful to have a theory of thin inhomogeneous structures developed on the basis of 3-D elasticity theory with no simplifying assumptions (with no a priori hypothesis).
Download or read book Prestressed Concrete Structures written by Praveen Nagarajan and published by Pearson Education India. This book was released on 2013 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is suited for a first course in pre-stressed concrete design offered to senior undergraduate students in civil engineering and postgraduate students in structural engineering. The book focuses on the behaviour of the pre-stressed concrete structural elements. Carefully-chosen worked examples are included to delineate the design aspects while relevant chapter-end questions enable effortless recapitulation of the subject. The content, while being useful to both the students and teachers, will also serve as an invaluable reference for engineers.
Download or read book Composite Structures of Steel and Concrete written by Roger P. Johnson and published by John Wiley & Sons. This book was released on 2018-08-21 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to the theory and design of composite structures of steel and concrete. Material applicable to both buildings and bridges is included, with more detailed information relating to structures for buildings. Throughout, the design methods are illustrated by calculations in accordance with the Eurocode for composite structures, EN 1994, Part 1-1, ‘General rules and rules for buildings’ and Part 1-2, ‘Structural fire design’, and their cross-references to ENs 1990 to 1993. The methods are stated and explained, so that no reference to Eurocodes is needed. The use of Eurocodes has been required in the UK since 2010 for building and bridge structures that are publicly funded. Their first major revision began in 2015, with the new versions due in the early 2020s. Both authors are involved in the work on Eurocode 4. They explain the expected additions and changes, and their effect in the worked examples for a multi-storey framed structure for a building, including resistance to fire. The book will be of interest to undergraduate and postgraduate students, their lecturers and supervisors, and to practising engineers seeking familiarity with composite structures, the Eurocodes, and their ongoing revision.
Download or read book Analysis of process induced distortions and residual stresses of composite structures written by Christian Brauner and published by Logos Verlag Berlin GmbH. This book was released on 2013 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased application of composite materials in lightweight structures leads to new integral design of structural parts, using the example of, an integral composite landing flap of an Airbus A320 aircraft. This offers possibilities to simplify the process chain, to decrease manufacturing costs and to have fibre fair structural design. The critical disadvantage of large integral designs is that process-induced deformations are a risk factor during the design phase of the manufacturing process, because rework is not always possible. Especially, the aircraft industry with its demands on high qualities / tolerances and the application of hot curing resin systems, requires knowledge-based methods for virtual process design to avoid time- and effort-consuming iterations. This thesis contributes to the understanding of the mechanism behind process-induced distortions and stresses related to the Resin Transfer Moulding (RTM) manufacturing process. The aim is to comprehend the phenomena, to identify related parameters and to present compensation strategies.
Download or read book Stress Analysis of Fiber reinforced Composite Materials written by M. W. Hyer and published by DEStech Publications, Inc. This book was released on 2009 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and improved, Stress Analysis of Fiber-Reinforced Composite Materials, Hyer's work remains the definitive introduction to the use of mechanics to understand stresses in composites caused by deformations, loading, and temperature changes. In contrast to a materials science approach, Hyer emphasizes the micromechanics of stress and deformation for composite material analysis. The book provides invaluable analytic tools for students and engineers seeking to understand composite properties and failure limits. A key feature is a series of analytic problems continuing throughout the text, starting from relatively simple problems, which are built up step-by-step with accompanying calculations. The problem series uses the same material properties, so the impact of the elastic and thermal expansion properties for a single-layer of FR material on the stress, strains, elastic properties, thermal expansion and failure stress of cross-ply and angle-ply symmetric and unsymmetric laminates can be evaluated. The book shows how thermally induced stresses and strains due to curing, add to or subtract from those due to applied loads.Another important element, and one unique to this book, is an emphasis on the difference between specifying the applied loads, i.e., force and moment results, often the case in practice, versus specifying strains and curvatures and determining the subsequent stresses and force and moment results. This represents a fundamental distinction in solid mechanics.
Download or read book Mechanics of Composite Structures written by László P. Kollár and published by Cambridge University Press. This book was released on 2003-02-17 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An increase in the use of composite materials has led to a greater demand for engineers versed in the design of structures made from such materials. This book demonstrates advanced concepts and emphasises structures. More than 300 illustrations, 50 fully worked problems, and material properties data sets are included.
Download or read book Residual Stresses in Composite Materials written by Mahmood M. Shokrieh and published by Woodhead Publishing. This book was released on 2021-06-22 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The residual stress is a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, lightweight materials such as composites and their wide range of applications; it is critical that the residual stresses of composite materials are understood and measured correctly.The first edition of this book consists of thirteen chapters divided into two parts. The first part reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. There are also additional chapters on using mathematical (analytical and numerical) methods for the calculation of residual stresses in composite materials. These include the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses measuring residual stresses in different types of composites including polymer and metal matrix composites. The addition of nanoparticles to the matrix of polymeric composites as a new technique for the reduction of residual stresses is also discussed.In the Second Edition of this book, each of the original chapters of the first edition has been fully updated, taking into account the latest research and new developments. There are also five new chapters on the theoretical and experimental studies of residual stresses in the composite integrated circuits; residual stresses in additive manufacturing of polymers and polymer matrix composites; residual stresses in metal matrix composites fabricated by additive manufacturing; the eigenstrain based method for the incremental hole-drilling technique; and the estimation of residual stresses in polymer matrix composites using the digital image correlation technique.Residual Stresses in Composite Materials, Second Edition, provides a unique and comprehensive overview of this important topic and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine, and sporting industries. - Presents the latest developments on theoretical and experimental studies of residual stresses in composites - Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses - Discusses residual stresses in the polymer matrix, metal matrix, and ceramic matrix composites - Considers the addition of nanoparticles to the matrix as a new technique for reduction of residual stresses in polymeric composites - Introduces the latest advancements of research on the residual stresses in additive-manufactured polymer and metal matrix composites
Download or read book Steel and Composite Structures written by Y. C. Wang and published by Taylor & Francis. This book was released on 2018-05-08 with total page 1099 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 150 papers representing the most recent international research findings on steel and composite structures. Including steel constructions; buckling and stability; codes; composite; control; fatigue and fracture; fire; impact; joints; maintenance; plates and shells; retrofitting; seismic; space structures; steel; structural analysis; structural components and assemblies; thin-walled structures; vibrations, and wind. A special session is dedicated on codification. A valuable source of information to researchers and practitioners in the field of steel and composite structures.
Download or read book Hybrid Finite Element Method for Stress Analysis of Laminated Composites written by Suong Van Hoa and published by Springer Science & Business Media. This book was released on 1998-03-31 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has one single purpose: to present the development of the partial hybrid finite element method for the stress analysis of laminated composite structures. The reason for this presentation is because the authors believe that partial hybrid finite element method is more efficient that the displacement based finite element method for the stress analysis oflaminated composites. In fact, the examples in chapter 5 of this book show that the partial hybrid finite element method is about 5 times more efficient than the displacement based finite element method. Since there is a great need for accurate and efficient calculation of interlaminar stresses for the design using composites, the partial hybrid finite method does provide one possible solution. Hybrid finite method has been in existence since 1964 and a significant amount of work has been done on the topic. However, the authors are not aware of any systematic piece of literature that gives a detailed presentation of the method. Chapters of the displacement finite element method and the evolution 1 and 2 present a sununary of the hybrid finite element method. Hopefully, these two chapters can provide the readers with an appreciation for the difference between the displacement finite element method and the hybrid finite element. It also should prepare the readers for the introduction of partial hybrid finite element method presented in chapter 3.
Download or read book The Theory and Practice of Reinforced Concrete written by Clarence Whiting Dunham and published by . This book was released on 1966 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the fundamentals of reinforced concrete construction.
Download or read book Global local Stress Analysis of Composite Structures written by Jonathan B. Ransom and published by . This book was released on 1989 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of stress concentrations in composite structures written by Charles D. Babcock and published by . This book was released on 1985 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress and Damage in Polymer Matrix Composite Materials Due to Material Degradation at High Temperatures written by Hugh L. McManus and published by . This book was released on 1996 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures written by J. Hult and published by Springer. This book was released on 2014-05-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book aims at giving an overview of current methods in engineering mechanics of FRP components and structures as well as hybrid components and structures. Main emphasis is on basic micro and macro mechanics of laminates. Long as well as short fibre composites are studied, and criteria for different kinds of rupture are treated. Micromechanical considerations for material characterization and mechanisms of static ductile and brittle rupture are studied, as well as FRP structures under thermal and dynamic loading programs. Optimum design and manufacture situations are described as well. The book makes designers familiar with the opportunities and limitations of modern high quality fibre composites. Practical engineering applications of the described analytical and numerical methods are also presented.
Download or read book Rehabilitation of Metallic Structural Systems Using Fiber Reinforced Polymer FRP Composites written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2024-11-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation of Metallic Structural Systems Using Fiber-Reinforced Polymer (FRP) Composites, Second Edition provides comprehensive knowledge on the application of FRPs in various types of metallic field structures. Part I provides an overview of the various types of materials and systems and discusses the durability of bonds. Part II focuses on materials-level considerations, such as corrosion and mechanical behavior, putty effects on the effectiveness of pipeline systems, laser joining and the use of carbon and basalt FRP for underwater repair. Building on Part II, the final three sections focus on applications of FRP composites to steel components and various infrastructure systems. This book will be a standard reference for civil engineers, designers, materials scientists, and other professionals who are involved in the rehabilitation of metallic structures using fiber reinforced polymer composites. Contains eighteen new chapters covering materials-level aspects and applications Presents materials developments for tailored bonds, durability, and bond behavior Includes methods of analysis, testing, and implementation across a broad range of sectors Covers design aspects, guidelines, and codes Discusses economic aspects and future prospects
Download or read book Fatigue Design of Steel and Composite Structures written by Alain Nussbaumer and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.
Download or read book Properties for Design of Composite Structures written by Neil McCartney and published by John Wiley & Sons. This book was released on 2022-09-21 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROPERTIES FOR DESIGN OF COMPOSITE STRUCTURES A comprehensive guide to analytical methods and source code to predict the behavior of undamaged and damaged composite materials In Properties for Design of Composite Structures: Theory and Implementation Using Software, distinguished researcher Dr. Neil McCartney delivers a unique and insightful approach to the development of predictive methods for the properties of undamaged and damaged laminated composite materials. The book focuses on presenting compact analytical formulae for several important effective properties—including mechanical, thermal, and electrical—that can be applied to a variety of reinforcement geometries. The author introduces a compact notation that enables an explicit treatment of laminate property determination, including the out-of-plane shear properties required for three-dimensional numerical simulations of structural features using finite and boundary element analyses. There is also a detailed consideration of ply crack closure and a useful study of the interrelationships between the effective thermoelastic constants of damaged laminates. The book also offers: A thorough introduction to the principles and formulae for homogenous materials and applications, including continuum and fracture concepts for homogeneous materials A comprehensive exploration of the properties of undamaged composites, including undamaged composite materials with multiple phases and the properties of a single undamaged lamina Practical discussions of the properties of damaged composites, including matrix cracking in UD composites and damaged laminates Consideration of effects of delamination, fatigue, and environmentally induced damage In-depth examinations of derivations of key results, including the analysis of bridged cracks and stress transfer mechanics for cross-ply and general symmetric laminates Perfect for composite design engineers in all types of material-supplying industries and manufacturing companies, Properties for Design of Composite Structures: Theory and Implementation Using Software will also earn a place in the libraries of undergraduate and graduate students in engineering, aerospace, and materials departments.
