Download or read book Stress Evaluation Using Neutrons and Synchrotron Radiation written by Anke Pyzalla and published by Trans Tech Publications Ltd. This book was released on 2008-03-07 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection addresses specific topics within the field of stress measurement in solids using neutrons, X-rays and synchrotron radiation. Particular attention is paid to multidisciplinary approaches involving an understanding of the measured stress field and the implications of the stress field for the behaviour of materials and components.
Download or read book Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation written by Anke Rita Pyzalla and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation written by Yoshiaki Akiniwa and published by Trans Tech Publications Ltd. This book was released on 2010-05-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, Peer reviewed papers from the MECA SENS V (The 5th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation)/ QuBS2009 (The 3rd International Symposium of Quantum Beam Science Directorate of Japan Atomic Energy Agency), Mito 10 - 12 November 2009
Download or read book Stress Evaluation Using Neutrons and Synchrotron Radiation written by and published by . This book was released on 2008 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection addresses specific topics within the field of stress measurement in solids using neutrons, X-rays and synchrotron radiation. Particular attention is paid to multidisciplinary approaches involving an understanding of the measured stress field and the implications of the stress field for the behaviour of materials and components. Advances in instrumentation, experimental techniques, data evaluation, modelling and simulation are presented by scientists from all over the world. The scientific community working in this challenging field of research is significantly increasing. The discussion of past achievements, and of planned future research, demonstrates the evolution of this research-area, and the scientific as well as technological potential of stress measurement in solids.
Download or read book Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI written by Heinz Günter Brokmeier and published by Trans Tech Publications Ltd. This book was released on 2013-11-21 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The exciting and comprehensive program of the MECA SENS VI conference provided a platform for current topics within the research fields of Mechanical Stress Evaluation with Neutrons and Synchrotron Radiation. The resulting contributions in this volume offer an excellent overview of all the various aspects in this field ranging from fundamental research and modelling to practical engineering applications.
Download or read book Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VIII written by Thomas Holden and published by Trans Tech Publications Ltd. This book was released on 2017-08-22 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collected from scientific papers which were presented on 8th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (MECA SENS VIII 2015, September 28 October 02 , 2015, Grenoble, France). Collection is related to the area of research the the mechanical properites of modern structural materials, their behavior in the mechanical processing and welding and also covers researches of some modern techniques for non-destructive testing of mechanical properties of materials.
Download or read book Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VII written by Thomas Holden and published by Trans Tech Publications Ltd. This book was released on 2014-02-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The collection shows the importance of neutron and synchrotron radiation in the evaluation of mechanical stresses. It gathers the current knowledge from those concerned with the mechanical stress evaluation of materials and components using neutron and synchrotron radiation. It also gives an interesting "snap-shot" of progress in the field. The wide array contributions focus on the following key topics: Stress evaluation using neutrons, synchrotron radiation and X-rays; Development of measurement methods and instrumentation; Material processing and residual stresses; The influence of residual stresses on the physical and mechanical properties of materials and components; Measurement and assessment of residual micro-stresses and intergranular stresses; Residual strains and stresses in complex materials (e.g. multi-phase and biomaterials); Industrial applications of residual stress analysis using neutrons, synchrotron radiation and X-rays; and Complementary techniques for residual stress measurements.
Download or read book Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VI written by and published by . This book was released on 2013 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exciting and comprehensive program of the MECA SENS VI conference provided a platform for current topics within the research fields of Mechanical Stress Evaluation with Neutrons and Synchrotron Radiation. The resulting contributions in this volume offer an excellent overview of all the various aspects in this field ranging from fundamental research and modelling to practical engineering applications.
Download or read book The First Conference on Stress Evaluation with Neutrons and Synchrotron Radiation Reims France December 13th 14th 2000 written by Conference on Stress Evaluation with Neutrons and Synchrotron Radiation and published by . This book was released on 2001 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Stress Evaluation by Neutron and Synchrotron Radiation written by Deon Marais and published by Materials Research Forum LLC. This book was released on 2018-04-20 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9th International Conference on Mechanical Stress Evaluation by Neutron and Synchrotron Radiation which was hosted by the South African Nuclear Energy Corporation (Necsa) SOC Limited in cooperation with the International Atomic Energy Agency (IAEA). The conference topics included deformation & modeling, processing & welding, techniques & instruments, mechanical methods vs. diffraction, microstructure & characterization, surface modification & coatings, 3D/4D characterization and fatigue, creep & plasticity.
Download or read book Neutrons and Synchrotron Radiation in Engineering Materials Science written by Peter Staron and published by John Wiley & Sons. This book was released on 2017-01-03 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining its proven concept, the second edition of this ready reference specifically addresses the need of materials engineers for reliable, detailed information on modern material characterization methods. As such, it provides a systematic overview of the increasingly important field of characterization of engineering materials with the help of neutrons and synchrotron radiation. The first part introduces readers to the fundamentals of structure-property relationships in materials and the radiation sources suitable for materials characterization. The second part then focuses on such characterization techniques as diffraction and scattering methods, as well as direct imaging and tomography. The third part presents new and emerging methods of materials characterization in the field of 3D characterization techniques like three-dimensional X-ray diffraction microscopy. The fourth and final part is a collection of examples that demonstrate the application of the methods introduced in the first parts to problems in materials science. With thoroughly revised and updated chapters and now containing about 20% new material, this is the must-have, in-depth resource on this highly relevant topic.
Download or read book Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation VIII written by Thomas Holden and published by . This book was released on 2017-01-09 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collected from scientific papers which were presented on 8th International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation (MECA SENS VIII 2015, September 28 - October 02, 2015, Grenoble, France). Collection is related to the area of research the the mechanical properites of modern structural materials, their behavior in the mechanical processing and welding and also covers researches of some modern techniques for non-destructive testing of mechanical properties of materials.
Download or read book Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation written by M.E. Fitzpatrick and published by CRC Press. This book was released on 2003-02-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: While residual stress can be a problem in many industries and lead to early failure of component, it can also be introduced deliberately to improve lifetimes. Knowledge of the residual stress state in a component can be critical for quality control of surface engineering processes or vital to performing an accurate assessment of component life unde
Download or read book Neutrons and Synchrotron Radiation in Engineering Materials Science written by Walter Reimers and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Besides its coverage of the four important aspects of synchrotron sources, materials and material processes, measuring techniques, and applications, this ready reference presents both important method types: diffraction and tomography. Following an introduction, a general section leads on to methods, while further sections are devoted to emerging methods and industrial applications. In this way, the text provides new users of large-scale facilities with easy access to an understanding of both the methods and opportunities offered by different sources and instruments.
Download or read book Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation written by Alain Lodini and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).This collection addresses specific topics within the field of stress measurement in solids using neutrons, X-rays and synchrotron radiation. Particular attention is paid to multidisciplinary approaches involving an understanding of the measured stress field and the implications of the stress field for the behaviour of materials and components. Advances in instrumentation, experimental techniques, data evaluation, modelling and simulation are presented by scientists from all over the world. The scientific community working in this challenging field of research is significantly increasing. The discussion of past achievements, and of planned future research, demonstrates the evolution of this research-area, and the scientific as well as technological potential of stress measurement in solids. This volume is a collection of selected peer-reviewed papers from the MECASENS IV conference on stress evaluation on materials by neutron and synchrotron radiation held in Vienna, Austria, on September 24- 26, 2007. The papers, prepared by scientists in both academia and industry, cover a variety of related topics, including processing, plasticity, methods, ceramics, welds, composites, and thin films. Papers also include discussions of advances in instrumentation, experimental techniques, data evaluation, modeling, and simulation. The collection was edited by Degischer (materials science and technology, Vienna U. of Technology) and Pyzalla and Borbély (material diagnostics and steel technology, Max Planck Institut für Eisenforschung GmBH).
Download or read book In situ Studies with Photons Neutrons and Electrons Scattering II written by Thomas Kannengiesser and published by Springer. This book was released on 2014-06-14 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an insight into current research topics, focusing special attention exactly on welding issues. The presented research work demonstrates that application of synchrotron and neutron radiation in combination with other techniques enables the basic understanding of material-related processes to be extended appreciably. It also shows ways of how to improve new materials and their use in industry. Following on from the 1st workshop in 2009 at BAM Berlin, a 2nd workshop dealing with this subject matter was held in 28-30 November, 2012 in Osaka/Japan with international participation of scientists from sixteen countries. The book includes selected contributions from the various subject blocks, precisely covering issues of practical and immediately implementable benefit to industrial enterprises. Therefore, peer-reviewed papers dealing with the following topics are contained as well: - Phase transformation during welding, metallurgy and material development - Evolution and significance of residual stresses - Investigations into laser and electron beam welding
Download or read book Non destructive Materials Characterization and Evaluation written by Walter Arnold and published by Springer Nature. This book was released on 2023-07-07 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to non-destructive materials characterization (NDMC) using different non-destructive evaluation techniques. It presents theoretical basis, physical understanding, and technological developments in the field of NDMC with suitable examples for engineering and materials science applications. It is written for engineers and researchers in R&D, design, production, quality assurance, and non-destructive testing and evaluation. The relevance of NDMC is to achieve higher reliability, safety, and productivity for monitoring production processes and also for in-service inspections for detection of degradations, which are often precursors of macro-defects and failure of components. Ultrasonic, magnetic, electromagnetic and X-rays based NDMC techniques are discussed in detail with brief discussions on electron and positron based techniques.
