Download or read book Stress corrosion Cracking Characterization of High strength Steels base Metals and Weldments written by Charles Tatsumi Fujii and published by . This book was released on 1978 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the results of studies on the effects of compositional, metallurigical, and microstructural factors on the SCC behavior of high-strength steels and weldments. The primary materials were quench-and-tempered steels or weldments in the HY-130 and HY-180 systems with complex martensitic microstructures. The cantilever beam method was used to establish the materials' SCC characteristics. These characteristics, complemented by fractographic and metallorgraphic examinations, identified potential pathways for improving weldment properties. The influence of processing, welding, and heat treating on microstructures, and correlations of the latter with SCC behavior and fracture modes, were examined. (Author).
Download or read book Stress Corrosion Cracking written by V S Raja and published by Elsevier. This book was released on 2011-09-22 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of stress corrosion cracking (SCC), which causes sudden failure of metals and other materials subjected to stress in corrosive environment(s), has a significant impact on a number of sectors including the oil and gas industries and nuclear power production. Stress corrosion cracking reviews the fundamentals of the phenomenon as well as examining stress corrosion behaviour in specific materials and particular industries. The book is divided into four parts. Part one covers the mechanisms of SCC and hydrogen embrittlement, while the focus of part two is on methods of testing for SCC in metals. Chapters in part three each review the phenomenon with reference to a specific material, with a variety of metals, alloys and composites discussed, including steels, titanium alloys and polymer composites. In part four, the effect of SCC in various industries is examined, with chapters covering subjects such as aerospace engineering, nuclear reactors, utilities and pipelines. With its distinguished editors and international team of contributors, Stress corrosion cracking is an essential reference for engineers and designers working with metals, alloys and polymers, and will be an invaluable tool for any industries in which metallic components are exposed to tension, corrosive environments at ambient and high temperatures. Examines the mechanisms of stress corrosion cracking (SCC) presenting recognising testing methods and materials resistant to SCC Assesses the effect of SCC on particular metals featuring steel, stainless steel, nickel-based alloys, magnesium alloys, copper-based alloys and welds in steels Reviews the monitoring and management of SCC and the affect of SCC in different industries such as petrochemical and aerospace
Download or read book Corrosion of Weldments written by Joseph R. Davis and published by ASM International. This book was released on 2006-01-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion failures of industrial components are commonly associated with welding. The reasons are many and varied. For example, welding may reduce the resistance to corrosion and environmentally assisted cracking by altering composition and microstructure, modifying mechanical properties, introducing residual stress, and creating physical defects. This book details the many forms of weld corrosion and the methods used to minimize weld corrosion. Chapters on specific alloys groups--carbon and alloy steels, stainless steels, high-nickel alloys, and nonferrous alloys--describe both general welding characteristics and the metallurgical factors that influence corrosion behavior. Corrosion problems associated with dissimilar metal weldments are also examined. Case histories document corrosion problems unique to specific industries including oil and gas, chemical processing, pulp and paper, and electric power. Special challenges caused by high-temperature environments are discussed. Commonly used methods to monitor weld corrosion and test methods for evaluation of intergranular, pitting, crevice, stress-corrosion cracking, and other forms of corrosion are also reviewed.
Download or read book Report of NRL Progress written by Naval Research Laboratory (U.S.) and published by . This book was released on 1972 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Procedures for stress corrosion cracking characterization and interpretatation to failure safe design for high strength steels written by R. W. Judy and published by . This book was released on 1969 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Welded Structures written by Koichi Masubuchi and published by Elsevier. This book was released on 2013-10-22 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Welded Structures: Residual Stresses, Distortion, and their Consequences encompasses several topics related to design and fabrication of welded structures, particularly residual stresses and distortion, as well as their consequences. This book first introduces the subject by presenting the advantages and disadvantages of welded structures, as well as the historical overview of the topic and predicted trends. Then, this text considers residual stresses, heat flow, distortion, fracture toughness, and brittle and fatigue fractures of weldments. This selection concludes by discussing the effects of distortion and residual stresses on buckling strength of welded structures and effects of weld defects on service behavior. This book also provides supplementary discussions on some related and selected subjects. This text will be invaluable to metallurgists, welders, and students of metallurgy and welding.
Download or read book Environmental and Metallurgical Factors of Stress corrosion Cracking in High strength Steels written by C. J. Slunder and published by . This book was released on 1961 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cracking in High strength Steel Weldments written by P. A. Kammer and published by . This book was released on 1964 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weldment cracking is a broad complex field. Even if one considers only cracking of steel weldments, the problems range from cracking at temperatures near the solidus during welding to cracking at room temperature days, weeks, or months after welding is completed. Numerous reports of investigations in this field are contained in the published and unpublished literature. However, most of these reports cover only a particular problem in a specific area of the broad field of weldment cracking. This review attempts to cover the major aspects of the entire field of weldment cracking. Necessarily, the review is for the most part general, only being specific in a few instances to illustrate a point. (Author).
Download or read book Stress corrosion Cracking written by Russell H. Jones and published by ASM International(OH). This book was released on 1992 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the many conditions under which stress-corrosion cracking (SCC) can occur, the parameters which control SCC, and the methodologies for mitigating and testing for SCC, plus information on mechanisms of SCC with experimental data on a variety of materials. Contains information about environmen
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress corrosion Cracking in High Strength Steels and in Titanium and Aluminum Alloys written by Benjamin Floyd Brown and published by . This book was released on 1972 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress corrosion Cracking and Hydrogen stress Cracking of High strength Steel written by Ellis E. Fletcher and published by . This book was released on 1966 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength steels are susceptible to delayed cracking under suitable conditions. Frequently such a brittle failure occurs at a stress that is only a fraction of the nominal yield strength. Considerable controversy exists over whether such failures result from two separate and distinct phenomena or whether there is but one mechanism called by two different names. Stress-corrosion cracking is the process in which a crack propagates, at least partially, by the stress induced corrosion of a susceptible metal at the advancing tip of the stress-corrosion crack. There is considerable evidence that this cracking results from the electrtrochemical corrosion of a metal subjected to tensile stresses, either residual or externally applied. Hydrogen-stress cracking is cracking which occurs as the result of hydrogen in the metal lattice in combination with tensile stresses. Hydrogen-stress cracking cannot occur if hydrogen is prevented from entering the steel, or if hydrogen that has entered during processing or service is removed before permanent damage has occurred. It is generally agreed that corrosion plays no part in the actual fracture mechanism. This report was prepared to point out wherein the two fracture mechanisms under consideration are similar and wherein they differ. From the evidence available today, the present authors have concluded that there are two distinct mechansims of delayed failure. (Author).
Download or read book Stress Corrosion Cracking of High Strength Steels with Particular Reference to Welding written by T. G. Gooch and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Corrosion in Metals written by Pietro Paolo Milella and published by Springer Nature. This book was released on with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress corrosion Cracking of High strength Stainless Steels in Atmospheric Environments written by C. J. Slunder and published by . This book was released on 1961 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding Journal written by and published by . This book was released on 2008 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
