Download or read book Stress corrosion Cracking of Aluminum Alloys written by F. H. Haynie and published by . This book was released on 1966 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report deals with the stress-corrosion cracking of aluminum alloys, and it represents an effort by DMIC to expand on the information contained in DMIC Memorandum 202, 'Stress-Corrosion Cracking of Aluminum Alloys', dated February 15, 1965. DMIC Report 228 begins by presenting a comprehensive definition of stress-corrosion cracking. This is followed by sections dealing with (1) the historical development and growth in awareness of the problem, (2) the mechanisms involved, and (3) the theory of stress-corrosion cracking. A section on experimental techniques is presented. These techniques include test methods used to determine the susceptibility of alloys to stress-corrosion cracking, as well as more refined methods of studying the fundamental mechanisms of the problem. Different evaluation methods, applicable to obtaining the different objectives of stress-corrosion testing, are also presented. All of the foregoing serve as background to the sections on stress-corrosion-cracking behavior of aluminum alloys and preventive measures. (Author).
Download or read book Corrosion of Magnesium Alloys written by G L Song and published by Woodhead Publishing. This book was released on 2011-03-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of magnesium alloys is increasing in a range of applications, and their popularity is growing wherever lightweight materials are needed. This book provides a comprehensive account of the corrosion of magnesium alloys. It covers not only the corrosion performances and mechanisms of Mg alloys in conventional environments, such as sodium chloride solutions, but also looks at their corrosion behaviours in special media, like engine coolants and simulated body fluids. Part one covers fundamentals such as the corrosion electrochemistry, activity and passivity of magnesium and its alloys. Part two then considers the metallurgical effect in relation to the corrosion of magnesium alloys, including the role of micro-structure and earth-rare elements, the corrosion behaviour of magnesium-based bulk metallic glasses, and the corrosion of innovative magnesium alloys. Part three goes on to describe environmental influences on the corrosion of magnesium alloys, such as atmospheric corrosion, stress corrosion cracking, creep and fatigue behaviour, and galvanic corrosion. Finally, part four is concerned with various means of protecting magnesium alloys against corrosion through the use of aluminium electrodeposition, conversion and electrophoretic coatings, and anodisation. With its distinguished editor and team of contributors, this book is an invaluable resource for metallurgists, engineers and designers working with magnesium and its alloys, as well as professionals in the aerospace and automotive industries.
Download or read book Corrosion of Aluminum and Aluminum Alloys written by Joseph R. Davis and published by ASM International. This book was released on 1999-01-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress corrosion Cracking in High Strength Steels and in Titanium and Aluminum Alloys written by Benjamin Floyd Brown and published by . This book was released on 1972 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress Corrosion Cracking written by V S Raja and published by Elsevier. This book was released on 2011-09-22 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of stress corrosion cracking (SCC), which causes sudden failure of metals and other materials subjected to stress in corrosive environment(s), has a significant impact on a number of sectors including the oil and gas industries and nuclear power production. Stress corrosion cracking reviews the fundamentals of the phenomenon as well as examining stress corrosion behaviour in specific materials and particular industries.The book is divided into four parts. Part one covers the mechanisms of SCC and hydrogen embrittlement, while the focus of part two is on methods of testing for SCC in metals. Chapters in part three each review the phenomenon with reference to a specific material, with a variety of metals, alloys and composites discussed, including steels, titanium alloys and polymer composites. In part four, the effect of SCC in various industries is examined, with chapters covering subjects such as aerospace engineering, nuclear reactors, utilities and pipelines.With its distinguished editors and international team of contributors, Stress corrosion cracking is an essential reference for engineers and designers working with metals, alloys and polymers, and will be an invaluable tool for any industries in which metallic components are exposed to tension, corrosive environments at ambient and high temperatures. - Examines the mechanisms of stress corrosion cracking (SCC) presenting recognising testing methods and materials resistant to SCC - Assesses the effect of SCC on particular metals featuring steel, stainless steel, nickel-based alloys, magnesium alloys, copper-based alloys and welds in steels - Reviews the monitoring and management of SCC and the affect of SCC in different industries such as petrochemical and aerospace
Download or read book Corrosion of Aluminium written by Christian Vargel and published by Elsevier. This book was released on 2004-10-02 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. - 600 bibliographic references provide a comprehensive guide to over 100 years of related study - Providing practical applications to the reader across many industries - Accessible to both the beginner and the expert
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Data Book written by ASM International and published by ASM International. This book was released on 1994-12-31 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Electrochemical Corrosion written by Ele Eugene Stansbury and published by ASM International. This book was released on 2000-01-01 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the essential aspects of the corrosion behavior of metals in aqueous environments, this book is designed with the flexibility needed for use in courses for upper-level undergraduate and graduate students, for concentrated courses in industry, for individual study, and as a reference book.
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1978 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminum Alloy Castings written by John Gilbert Kaufman and published by ASM International. This book was released on 2004-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: J. G. (Gil) Kaufman is currently president of his consulting company, Kaufman Associates.
Download or read book Stress Corrosion New Approaches written by H. Lee Craig and published by ASTM International. This book was released on 1976 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Aluminium written by Christian Vargel and published by Elsevier. This book was released on 2020-05-12 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Aluminium, Second Edition, highlights the practical and general aspects of the corrosion of aluminium alloys. Chapters help readers new to the topic understand the metallurgical, chemical and physical features of aluminium alloys. Author Christian Vargel adopts a practitioner styled approach that is based on the expertise he has gained during a 40-year career in aluminium corrosion. The book assesses the corrosion resistance of aluminium, a key metric recognized as one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission, and more. - Features 600 bibliographic references, providing a comprehensive guide to over 100 years of related study - Includes numerous illustrations to enhance study - Presents practical applications across many industries - Provides an accessible reference for both beginners and experts
Download or read book Japanese Science and Technology 1983 1984 written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch and published by . This book was released on 1985 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Fatigue in Engineering written by Ralph I. Stephens and published by John Wiley & Sons. This book was released on 2000-11-03 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classic, comprehensive, and up-to-date Metal Fatigue in Engineering Second Edition For twenty years, Metal Fatigue in Engineering has served as an important textbook and reference for students and practicing engineers concerned with the design, development, and failure analysis of components, structures, and vehicles subjected to repeated loading. Now this generously revised and expanded edition retains the best features of the original while bringing it up to date with the latest developments in the field. As with the First Edition, this book focuses on applied engineering design, with a view to producing products that are safe, reliable, and economical. It offers in-depth coverage of today's most common analytical methods of fatigue design and fatigue life predictions/estimations for metals. Contents are arranged logically, moving from simple to more complex fatigue loading and conditions. Throughout the book, there is a full range of helpful learning aids, including worked examples and hundreds of problems, references, and figures as well as chapter summaries and "design do's and don'ts" sections to help speed and reinforce understanding of the material. The Second Edition contains a vast amount of new information, including: * Enhanced coverage of micro/macro fatigue mechanisms, notch strain analysis, fatigue crack growth at notches, residual stresses, digital prototyping, and fatigue design of weldments * Nonproportional loading and critical plane approaches for multiaxial fatigue * A new chapter on statistical aspects of fatigue
Download or read book Fatigue and Corrosion in Metals written by Pietro Paolo Milella and published by Springer Nature. This book was released on with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt:
