Download or read book Polymer Glasses written by Connie B. Roth and published by CRC Press. This book was released on 2016-12-12 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: "the present book will be of great value for both newcomers to the field and mature active researchers by serving as a coherent and timely introduction to some of the modern approaches, ideas, results, emerging understanding, and many open questions in this fascinating field of polymer glasses, supercooled liquids, and thin films" –Kenneth S. Schweizer, Morris Professor of Materials Science & Engineering, University of Illinois at Urbana-Champaign (from the Foreword) This book provides a timely and comprehensive overview of molecular level insights into polymer glasses in confined geometries and under deformation. Polymer glasses have become ubiquitous to our daily life, from the polycarbonate eyeglass lenses on the end of our nose to large acrylic glass panes holding water in aquarium tanks, with advantages over glass in that they are lightweight and easy to manufacture, while remaining transparent and rigid. The contents include an introduction to the field, as well as state of the art investigations. Chapters delve into studies of commonalities across different types of glass formers (polymers, small molecules, colloids, and granular materials), which have enabled microscopic and molecular level frameworks to be developed. The authors show how glass formers are modeled across different systems, thereby leading to treatments for polymer glasses with first-principle based approaches and molecular level detail. Readers across disciplines will benefit from this topical overview summarizing the key areas of polymer glasses, alongside an introduction to the main principles and approaches.
Download or read book Stress and Strain in Plastic Flow written by Wendell Prescott Roop and published by . This book was released on 1948 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Snow Ice and Glaciers written by Vijay P. Singh and published by Springer Science & Business Media. This book was released on 2011-06-29 with total page 1301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The earth’s cryosphere, which includes snow, glaciers, ice caps, ice sheets, ice shelves, sea ice, river and lake ice, and permafrost, contains about 75% of the earth’s fresh water. It exists at almost all latitudes, from the tropics to the poles, and plays a vital role in controlling the global climate system. It also provides direct visible evidence of the effect of climate change, and, therefore, requires proper understanding of its complex dynamics. This encyclopedia mainly focuses on the various aspects of snow, ice and glaciers, but also covers other cryospheric branches, and provides up-to-date information and basic concepts on relevant topics. It includes alphabetically arranged and professionally written, comprehensive and authoritative academic articles by well-known international experts in individual fields. The encyclopedia contains a broad spectrum of topics, ranging from the atmospheric processes responsible for snow formation; transformation of snow to ice and changes in their properties; classification of ice and glaciers and their worldwide distribution; glaciation and ice ages; glacier dynamics; glacier surface and subsurface characteristics; geomorphic processes and landscape formation; hydrology and sedimentary systems; permafrost degradation; hazards caused by cryospheric changes; and trends of glacier retreat on the global scale along with the impact of climate change. This book can serve as a source of reference at the undergraduate and graduate level and help to better understand snow, ice and glaciers. It will also be an indispensable tool containing specialized literature for geologists, geographers, climatologists, hydrologists, and water resources engineers; as well as for those who are engaged in the practice of agricultural and civil engineering, earth sciences, environmental sciences and engineering, ecosystem management, and other relevant subjects.
Download or read book Plasticity Theory written by Jacob Lubliner and published by Courier Corporation. This book was released on 2013-04-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and geotechnical engineers, metallurgists and others. The necessary mathematics and basic mechanics and thermodynamics are covered in an introductory chapter, making the book a self-contained text suitable for advanced undergraduates and graduate students, as well as a reference for practitioners of solid mechanics.
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.
Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.
Download or read book Finite Plastic Deformation of Crystalline Solids written by K. S. Havner and published by Cambridge University Press. This book was released on 1992-03-27 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Matter and Methods at Low Temperatures written by Frank Pobell and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide information about performing experi ments at low temperatures, as well as basic facts concerning the low tem perature properties of liquid and solid matter. To orient the reader, I begin with chapters on these low temperature properties. The major part of the book is then devoted to refrigeration techniques and to the physics on which they are based. Of equal importance, of course, are the definition and measurement of temperature; hence low temperature thermometry is extensively discussed in subsequent chapters. Finally, I describe a variety of design and construction techniques which have turned out to be useful over the years. The content of the book is based on the three-hour-per-week lecture course which I have given several times at the University of Bayreuth between 1983 and 1991. It should be particularly suited for advanced stu dents whose intended masters (diploma) or Ph.D. subject is experimental condensed matter physics at low temperatures. However, I believe that the book will also be of value to experienced scientists, since it describes sev eral very recent advances in experimental low temperature physics and technology, for example, new developments in nuclear refrigeration and thermometry.
Download or read book Applied Mechanics of Solids written by Allan F. Bower and published by CRC Press. This book was released on 2009-10-05 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based.Develop Intuitive Ability to Identify and Avoid Physically Meaningless PredictionsApplied Mechanics o
Download or read book Cyclic Stress Strain and Plastic Deformation Aspects of Fatigue Crack Growth written by L. F. Impellizzeri and published by ASTM International. This book was released on 1977 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Deformation of Materials written by R. J. Arsenault and published by Elsevier. This book was released on 2013-10-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 6: Plastic Deformation of Materials covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book presents articles on the low temperature of deformation of bcc metals and their solid-solution alloys; the cyclic deformation of metals and alloys; and the high-temperature diffusion-controlled creep of some metals and alloys, with particular reference to the various creep mechanisms. The text also includes articles on superplasticity; the fatigue deformation of polymers; the low temperature deformation of crystalline nonmetals; and the recovery and recrystallization during high temperature deformation. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Postgraduate Orthopaedics written by Paul A. Banaszkiewicz and published by Cambridge University Press. This book was released on 2012-08-16 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The must-have book for candidates preparing for the oral component of the FRCS (Tr and Orth).
Download or read book Nonlinear Continuum Mechanics for Finite Elasticity Plasticity written by Koichi Hashiguchi and published by Elsevier. This book was released on 2020-06-19 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Continuum Mechanics for Finite Elasticity-Plasticity empowers readers to fully understand the constitutive equation of finite strain, an essential piece in assessing the deformation/strength of materials and safety of structures. The book starts by providing a foundational overview of continuum mechanics, elasticity and plasticity, then segues into more sophisticated topics such as multiplicative decomposition of deformation gradient tensor with the isoclinic concept and the underlying subloading surface concept. The subloading surface concept insists that the plastic strain rate is not induced suddenly at the moment when the stress reaches the yield surface but it develops continuously as the stress approaches the yield surface, which is crucially important for the precise description of cyclic loading behavior. Then, the exact formulations of the elastoplastic and viscoplastic constitutive equations based on the multiplicative decomposition are expounded in great detail. The book concludes with examples of these concepts and modeling techniques being deployed in real-world applications. Table of Contents: 1. Mathematical Basics 2. General (Curvilinear) Coordinate System 3. Description of Deformation/Rotation in Convected Coordinate System 4. Deformation/Rotation (Rate) Tensors 5. Conservation Laws and Stress Tensors 6. Hyperelastic Equations 7. Development of Elastoplastic Constitutive Equations 8. Multiplicative Decomposition of Deformation Gradient Tensor 9. Multiplicative Hyperelastic-based Plastic and Viscoplastic Constitutive Equations 10. Friction Model: Finite Sliding Theory - Covers both the fundamentals of continuum mechanics and elastoplasticity while also introducing readers to more advanced topics such as the subloading surface model and the multiplicative decomposition among others - Approaches finite elastoplasticity and viscoplasticty theory based on multiplicative decomposition and the subloading surface model - Provides a thorough introduction to the general tensor formulation details for the embedded curvilinear coordinate system and the multiplicative decomposition of the deformation gradient
Download or read book Welding Deformation and Residual Stress Prevention written by Ninshu Ma and published by Elsevier. This book was released on 2012-04-26 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generally, welding produces welding deformation and residual stress in the products, which influences the quality and performance of the products. Although many engineers and researchers have made great effort how to control these incidents, they have still remained unresolved. Welding Deformation and Residual Stress Prevention provides a unique computational approach to the prediction of the effects of deformation and residual stress on materials. The goal is to provide engineers and designers with the ability to create their own computational system for predicting and possibly avoiding the problem altogether. - The basic theories including "theory of elastic-plastic analysis" and "inherent strain theory" , and analysis procedures are described using a simple three-bar model - Online simulation software to perform basic analysis on welding mechanics - Examples of strategic methods and procedures are illustrated to have solved various welding-related problems encountered in the process of construction - Appendices present data bases for welding residual stresses, temperature dependent material properties, etc.
Download or read book Deformation Geometry for Materials Scientists written by C. N. Reid and published by Elsevier. This book was released on 2016-01-22 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation Geometry for Materials Scientists presents the study of macroscopic geometry of deformation, particularly on crystalline solids. The book discusses a wide range of topics on the deformation of crystalline materials. The text discusses concepts on stress and strain on materials and tensile tests. Linear elastic and plastic deformations; and the macroscopic geometry mechanism of slip and deformation twinning are covered as well. Materials scientists, engineers, and students of materials science will find this book a great reference material.
