Download or read book Strength of Metals and Alloys ICSMA 8 written by P. O. Kettunen and published by Elsevier. This book was released on 2013-10-22 with total page 1503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing almost 250 technical and review papers, these proceedings form an authoritative, state-of-the-art review of this important multidisciplinary topic. Emphasis is placed on the study of the strength of mechanical properties of materials and their dependence on the microstructure and defect arrangements. Areas covered include: dislocations; dislocation arrangements; plastic deformation; strengthening mechanisms; cyclic deformation and fatigue; plastic deformation at high temperatures; fracture; modern strengthening methods in steels; boundaries and interfaces.
Download or read book Plastic Deformation of Nanostructured Materials written by A.M. Glezer and published by CRC Press. This book was released on 2017-08-15 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Deformation of Nanostructured Materials offers comprehensive analysis on the most important data and results in the field of materials strength and mechanics. This reference systematically examines the special features of the mechanical behavior and corresponding structural mechanisms of crystal structure defects with grain sizes that range from meso- to micro- levels.
Download or read book Fatigue under Thermal and Mechanical Loading Mechanisms Mechanics and Modelling written by J. Bressers and published by Springer Science & Business Media. This book was released on 1996-04-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 50 contributions presented at the symposium `Fatigue under Thermal and Mechanical Loading'. The symposium addressed the mechanisms, mechanics and modelling of thermal and thermal-mechanical load effects on conventional and advanced structural materials. The proceedings provide an update of the research efforts in thermal and thermal-mechanical fatigue. The papers cover a wide range of materials, including metallic alloys from steels to advanced superalloy single crystals, ceramics as well as composites. Topics encompass recent developments in specimen and component testing techniques, mechanisms and mechanics of inelastic deformation, crack initiation and crack growth, as well as damage modelling for life-time prediction. The book is of interest to materials scientists, mechanical engineers and design engineers involved in the design of components for use at high temperatures.
Download or read book Rail Quality and Maintenance for Modern Railway Operation written by J.J. Kalker and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: In April 1990 a conference was held at the Cracow Institute of Technology, Cracow, Poland. The title of that conference was "Residual Stresses in Rails - Effects on Rail Integrity and Railroad Economics" and its themes were the measurement and prediction of residual stresses in rails, but, as the sub-title suggests, the intention was also to provide a link between research and its application to the practical railway world. At the Cracow conference there were 40 participants with 5 railways and 5 rail makers being represented and 25 papers were given. The Cracow conference was a success, and by March 1991 its off-spring, "The International Conference on Rail Quality and Maintenance for Modern Railway Operations", was conceived and birth was ultimately given in June 1992 at the Technical University, Delft. It turned out to be some baby, with 112 delegates from 24 countries taking part! As with its predecessor, the conference was to provide a forum for the exchange of ideas between research investigators, rail makers and railway engineers. A cursory examination of the list of participants suggests that about 57% were from the railway industry, 34% from universities and other research institutions and 9% from the steel industry. Bearing in mind that some of the railway industry participants were from their respective research and development organisations the balance of interests was about right.
Download or read book Metal Matrix Composites written by Minoru Taya and published by Elsevier. This book was released on 2016-01-11 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites: Thermomechanical Behavior discusses metal matrix composites, elaborating on that consists of two phases—fiber as reinforcement and metal as matrix. This book focuses on polymer matrix composites, including topics in metal matrix composites ranging from processing to fracture mechanics. The three basic types of composite materials—dispersion-strengthened, particle-reinforced, and fiber (whisker)-reinforced, are also described in detail. Dispersion-strengthened is characterized by a microstructure consisting of an elemental matrix within which fine particles are uniformly dispersed, while particle-reinforced is indicated by dispersed particles of greater than 1.0 μm diameter with a volume fraction of 5 to 40%. Fiber (whisker)-reinforced provides a distinguishing microstructural feature of fiber-reinforced materials, such as that the reinforcing fiber has one long dimension, while the reinforcing particles of the other two types do not. This publication serves as a reference data book to students and researchers aiming to acquire knowledge of the thermomechanical behavior of metal matrix composites.
Download or read book Metals Abstracts written by and published by . This book was released on 1994 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocations Mesoscale Simulations and Plastic Flow written by L. Kubin and published by Oxford University Press (UK). This book was released on 2013-04-18 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past twenty years, new experimental approaches, improved models and progress in simulation techniques brought new insights into long-standing issues concerning dislocation-based plasticity in crystalline materials. Dislocation dynamics simulations are becoming accessible to a wide range of users. This book presents to students and researchers in materials science and mechanical engineering a comprehensive coverage of the physical body of knowledge on whichthey are based. This includes classical studies, which are too often ignored, recent experimental and theoretical advances, as well as a discussion of selected applications on various topics.
Download or read book Texture and Anisotropy written by U. F. Kocks and published by Cambridge University Press. This book was released on 2000-08-15 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A successful book covering an important area of materials science, now available in paperback.
Download or read book Patterns Defects and Materials Instabilities written by D. Walgraef and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the origin of spatio-temporal order in open systems far from thermal equilibrium and the selection mechanisms of spatial struc tures and their symmetries is a major theme of present day research into the structures of continuous matter. The development of methods for pro ducing spatially ordered microstructures in solids by non-equilibrium methods opens the door to many technological applications. It is also be lieved that the key to laminar/turbulence transitions in fluids lies in the achievement of spatio-temporal order. Let us also emphasize the fact that the idea of self-organization in it self is at the origin of a reconceptualisation of science. Indeed, the appear ance of order which usually has been associated with equilibrium phase transitions appears to be characteristic of systems far from thermal equi librium. This phenomenon which was considered exceptional at first now the rule in driven systems. The chemical oscillations obtained appears to be in the Belousov-Zhabotinskii reaction were initially considered to be ther modynamically impossible and were rejected by a large number of chemists. Now these oscillations and related phenomena (waves, chaos, etc. ) are the subject of intensive research and new classes of chemical oscil lators have been recently discovered. Even living organisms have long been considered as the result of chance rather than necessity. Such points of view are now abandoned under the overwhelming influence of spatio-tem poral organization phenomena in various domains ranging from physics to biology via chemistry, nonlinear optics, and materials science .
Download or read book Plastics Engineering written by R.J. Crawford and published by Elsevier. This book was released on 2013-10-22 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook to cover both properties and processing of reinforced and unreinforced plastics to this level. It assumes no prior knowledge of plastics and emphasizes the practical aspects of the subject. In this second edition over half the book has been rewritten and the remainder has been updated and reorganized. Early chapters give an introduction to the types of plastics which are currently available and describe how a designer goes about selection of a plastic for a particular application. Later chapters lead the reader into more advanced aspects of mechanical design and analysis of polymer melt flow. All techniques developed are illustrated by numerous worked examples, and several problems are given at the end of each chapter - the solutions to which form an Appendix.
Download or read book Non Destructive Testing written by J. M. Farley and published by Elsevier. This book was released on 2017-05-17 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Destructive Testing, Volume 4 contains the proceedings of the Fourth European Conference held in London on September 13-17, 1987. Contributors explore a variety of topics related to non-destructive testing (NDT), including ultrasonic techniques, ultrasonic systems, electromagnetic techniques, condition monitoring of plant and structures, and magnetic particle and penetrant techniques. This text is comprised of 98 chapters; the first of which describes an ultrasonic technique for the assessment of the fat content of live beef animals for breeding purposes. Attention then turns to measurements of the longitudinal ultrasonic wave attenuation in spheroidal graphite iron test pieces subjected to fatigue loads. The chapters that follow focus on ultrasonic imaging; dry coupling probes; an expert system for ultrasonic examination of fuel rods; engineering and medical applications of diagnostic ultrasound; and signal processing of 3D maps of eddy currents. The reader is also methodically introduced to automation of eddy current testing; the use of artificial intelligence in vibration-based health monitoring; automated inspection of magnetic particles; and the theory and practice of acoustic emission. This text concludes with a chapter that reviews the NDT research program of the National NDT Center of Harwell Laboratory in the UK. This book will be of interest to materials scientists, materials engineers, and metallurgists.
Download or read book 13th International Conference on Aluminum Alloys ICAA 13 written by Hasso Weiland and published by Springer. This book was released on 2017-02-28 with total page 1857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. The papers are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.
Download or read book Purification Process and Characterization of Ultra High Purity Metals written by Yoshio Waseda and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts with an extended introductory treatise on the fundamentals before moving on to a detailed description of the new methods of purification of transition metals and rare earth metals.
Download or read book Small Fatigue Cracks written by K.S. Ravichandran and published by Elsevier. This book was released on 1999-09-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.
Download or read book Design Analysis written by Liu Cengdian and published by Elsevier. This book was released on 2016-06-03 with total page 1841 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure Vessel Technology, Volume 3 reviews the practices and trends in pressure vessel technology. This book discusses the tremendous progress in the various fields of pressure vessel technology, including fabrication techniques, ferrous materials, and life expectancy to assure structural integrity. Organized into 11 chapters, this compilation of papers begins with an overview of the fabrication techniques in pressure vessel technology. This text then examines the requirements of the chemical industry for the prevention of catastrophic failure of pressure components. Other chapters consider the major development of pressure vessels for special purposes, high pressure vessels, materials for making pressure vessels, and pressure vessel codes. This book discusses as well the seismic design in the field of pressure vessels and pipings. The final chapter deals with buckling resistance under seismic motions for thin-walled cylindrical vessels, of which predominant mode of failure is shear buckling and bending under horizontal earthquake loadings. This book is a valuable resource for mechanical engineers, project managers, and scientists.
Download or read book Current Advances in Mechanical Design Production IV written by Y. H. Kabil and published by Elsevier. This book was released on 2017-05-04 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an overview of the state of the art in mechanical design and production. Both basic and applied research papers highlight recent trends, techniques and case studies in two major fields: analysis and design of mechanical systems and components; production and industrial engineering. This volume also includes all the invited keynote lectures presented at the conference. Contains 73 papers.
Download or read book Ris Report written by and published by . This book was released on 1957 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
