Download or read book Stray Current Corrosion Due to Utility Cathodic Protection written by Richard W. Shipley and published by . This book was released on 1997 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conditions in which stray currents contribute to the corrosion of highway structures, the tests to determine if these conditions exist, and the methods recommended to alleviate either the conditions or the damage caused by stray current corrosion are investigated. An extensive review of the literature concerning the fundamentals of stray current corrosion and the practices of utility cathodic protection is presented, including a comprehensive study of the history of stray current corrosion, from its conception with the direct current trolley systems of the late 1880s to its present day problems in the cathodic protection industry. Federal, state, and Kansas Department of Transportation (KDOT) rules and policy are reviewed as they pertain to utility cathodic protection and the damage it may cause to adjacent underground highway structures.
Download or read book Electrocorrosion and Protection of Metals written by Joseph Riskin and published by Elsevier. This book was released on 2019-05-15 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrocorrosion and Protection of Metals, Second Edition, compiles theoretical and practical information, outlines the specific problem, and presents the available solutions related to corrosion by external currents. Basic data on the behavior of different metals under the attack of anodic, cathodic, direct and alternating currents is considered, as are the problems of electrocorrosion—from the identification of corrosion damage and detection of the external current sources, to the selection of optimal means and methods of mitigation, monitoring and protection of different metallic structures and structures of reinforced concrete. This book includes comprehensive information and provides necessary links to more detailed, original sources, thus enabling users to solve either general or particular problems of electrocorrosion and protection of metals. - Provides a comprehensive listing of all possible sources of external currents which attack metallic equipment, piping and other metallic structures - Outlines the sources of corrosion damage for fast and reliable analysis - Provides technical examples and case studies related to electrocorrosion - Presents new data and methods of electrocorrosion control and monitoring using computerized techniques and technologies - Includes original methods—only considered in this publication—of metals protection against electrocorrosion
Download or read book Underground corrosion cathodic protection and required field measurements written by National Research Council (U.S.). Building Research Advisory Board and published by National Academies. This book was released on 1962 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Track Design Handbook for Light Rail Transit written by and published by Transportation Research Board. This book was released on 2012 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: TCRP report 155 provides guidelines and descriptions for the design of various common types of light rail transit (LRT) track. The track structure types include ballasted track, direct fixation ("ballastless") track, and embedded track. The report considers the characteristics and interfaces of vehicle wheels and rail, tracks and wheel gauges, rail sections, alignments, speeds, and track moduli. The report includes chapters on vehicles, alignment, track structures, track components, special track work, aerial structures/bridges, corrosion control, noise and vibration, signals, traction power, and the integration of LRT track into urban streets.
Download or read book Handbook of Cathodic Corrosion Protection written by Walter von Baeckmann and published by Elsevier. This book was released on 1997-10-17 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers all aspects of cathodic protection in terms of both practice and theory.
Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. - Prolong the structural life of your offshore platforms and pipelines - Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings - Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.
Download or read book Corrosion in the Petrochemical Industry Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.
Download or read book Cathodic Protection for Earth buried Pipelines and Other Metal Structures written by J. Howard Bird and published by . This book was released on 1958 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book External Corrosion and Corrosion Control of Buried Water Mains written by Andrew E. Romer and published by American Water Works Association. This book was released on 2004 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water utilities often do not know the specific cause of external corrosion observed on their water mains, and consequently, the chosen preventative measure may not work effectively. Historically, these choices are based on data from other industries (e.g., gas and oil) and may not be suitable for the water industry. Corrosion of metallic pipes can be caused by a variety of mechanisms, each of which requires a different solution. Determining which corrosion mechanism is at work is not a simple matter, because the resulting pipe damage looks similar for all of them. The failure to properly identify corrosion sources may produce prevention systems that are ineffective or do not last. For example, it is not effective to install an anode bag on a main that has a bacteriological corrosion problem. Similarly, an anode bag installed to reduce corrosion caused by a stray impressed current would be quickly used up and would provide only short-term protection. Much recent research on corrosion has focused on internal corrosion, primarily related to water-quality issues, such as lead and copper control and red water. This project will examine external corrosion, which affects the structural integrity of the pipe and makes it vulnerable to leaks and breakage. After identifying the causes of external corrosion, the study will find economical solutions for each type of corrosion and verify them through field trials.
Download or read book NBS Building Science Series written by and published by . This book was released on 1974 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Underground Heat and Chilled Water Distribution Systems written by Tamami Kusuda and published by . This book was released on 1975 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NAVDOCKS written by and published by . This book was released on with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2010-12-01 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for engineers and related professionals in the oil and gas production industries. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. It is also an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production. While the may use by technicians and others with limited formal technical training, it will be written on a level intended for use by engineers having had some exposure to college-level chemistry and some familiarity with materials and engineering design.
Download or read book 107 2 Hearings Energy and Water Development Appropriations For 2003 Part 4 2002 written by and published by . This book was released on 2002 with total page 1512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Water Development Appropriations for 2003 Department of Energy National Nuclear Security Administration Power Marketing Administrations written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2002 with total page 2986 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion and Materials Selection written by Alireza Bahadori and published by John Wiley & Sons. This book was released on 2014-08-11 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum and chemical industries contain a wide variety of corrosive environments, many of which are unique to these industries. Oil and gas production operations consume a tremendous amount of iron and steel pipe, tubing, pumps, valves, and sucker rods. Metallic corrosion is costly. However, the cost of corrosion is not just financial. Beyond the huge direct outlay of funds to repair or replace corroded structures are the indirect costs – natural resources, potential hazards, and lost opportunity. Wasting natural resources is a direct contradiction to the growing need for sustainable development. By selecting the correct material and applying proper corrosion protection methods, these costs can be reduced, or even eliminated. This book provides a minimum design requirement for consideration when designing systems in order to prevent or control corrosion damage safely and economically, and addresses: • Corrosion problems in petroleum and chemical industries • Requirements for corrosion control • Chemical control of corrosive environments • Corrosion inhibitors in refineries and petrochemical plants • Materials selection and service life of materials • Surface preparation, protection and maintainability • Corrosion monitoring - plant inspection techniques and laboratory corrosion testing techniques Intended for engineers and industry personnel working in the petroleum and chemical industries, this book is also a valuable resource for research and development teams, safety engineers, corrosion specialists and researchers in chemical engineering, engineering and materials science.
Download or read book Energy and Water Development Appropriations for 2003 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2002 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
