Download or read book Rheo Physics of Multiphase Polymer Systems written by Kai Sondergaard and published by CRC Press. This book was released on 1995-06-02 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE Almost all polymeric systems are subjected to a flow field at least once along the route between preparation and application. . . . There is also an increased interest in predictive models on phase behavior and suitable techniques for characterizing the structure of these systems when subjected to flow. Multiphase polymeric systems are particularly susceptible to flow, which may cause orientation of species, morphological changes, and phase transitions. All these events may, in turn, affect the end product properties, such as permeability, electrical conductivity, [and] mechanical properties. In processing, escalating needs have evolved for optimization and development of novel and more uniform product properties and increased productivity. In order to arrive at an understanding of processing polymeric systems under elastic flow conditions, it is convenient to analyze the basic physical mechanisms under conditions that enable development of predictive models in conjunction with controlled experimentation. . . . In recent years, the science of rheo-physics has evolved and now involves both advanced theories and experimental techniques. Rheo-physics means the rheological, morphological, and thermodynamic behavior of structured polymer systems during flow. . . . In this monograph, the rheo-optical techniques are . . . emphasized. The book gives an introduction to rheo-physics, including fundamentals of theories, and a representative selection of applications of rheo-optical techniques for analyzing multiphase systems. The chapters contain both practical advice for the new experimenter . . . as well as review material for the experienced scientist.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radiation Processing of Polymer Materials and Its Industrial Applications written by Keizo Makuuchi and published by John Wiley & Sons. This book was released on 2012-02-07 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the effect of radiation on polymers and the versatility of its industrial applications. By helping readers understand and solve problems associated with radiation processing of polymers, it serves as an important reference and fills a gap in the literature. Radiation processing can significantly improve important properties of polymers, however, there are still misconceptions about processing polymers by using ionizing radiation. This book explains the radiation processing of polymeric materials used in many industrial products including cars, airplanes, computers, and TVs. It even addresses emerging "green" issues like biomaterials and hydrogels.

Download or read book Crystallization in Multiphase Polymer Systems written by Sabu Thomas and published by Elsevier. This book was released on 2017-09-15 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystallization in Multiphase Polymer Systems is the first book that explains in depth the crystallization behavior of multiphase polymer systems. Polymeric structures are more complex in nature than other material structures due to their significant structural disorder. Most of the polymers used today are semicrystalline, and the subject of crystallization is still one of the major issues relating to the performance of semicrystalline polymers in the modern polymer industry. The study of the crystallization processes, crystalline morphologies and other phase transitions is of great significance for the understanding the structure-property relationships of these systems. Crystallization in block copolymers, miscible blends, immiscible blends, and polymer composites and nanocomposites is thoroughly discussed and represents the core coverage of this book. The book critically analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale. Various experimental techniques used for the characterization of polymer crystallization process are discussed. Written by experts in the field of polymer crystallization, this book is a unique source and enables professionals and students to understand crystallization behavior in multiphase polymer systems such as block copolymers, polymer blends, composites and nanocomposites. - Covers crystallization of multiphase polymer systems, including copolymers, blends and nanocomposites - Features comprehensive, detailed information about the basic research, practical applications and new developments for these polymeric materials - Analyzes the kinetics of nucleation and growth process of the crystalline phases in multi-component polymer systems in different length scales, from macro to nanoscale

Download or read book Polymer Crystallization written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2023-06-28 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Crystallization Control the development of polymer crystals with this groundbreaking introduction Polymer crystallization is a crucial component of polymer development that impacts processing, applications, presentation, and more. Intervention in the polymer crystallization process, in the form of nanofilters, compatibilizers, and more, has the potential to improve optical and chemical properties, improve degrees of crystallinity, and increase the hardness of polymer composites. The myriad applications of crystalline polymers make this one of the most exciting and fast-growing fields in polymer research. Polymer Crystallization provides a comprehensive introduction to this field and its most important recent developments. It characterizes and analysis an expansive range of crystalline polymers and discusses possible mechanisms for influencing their crystallization processes to impact a variety of outcomes and applications. These applications include industries from food packaging to automotive parts to medical and aerospace materials. Polymer Crystallization readers will also find: Detailed treatment of polymer morphology, rheology, modeling, and more Thorough introduction to the fundamentals of polymer crystallization Discussion of environmental safety issues and avenues for future research Polymer Crystallization is a useful reference for materials scientists, polymer scientists, biomedical scientists, and advanced undergraduate and graduate students in these and related fields.

Download or read book Polyethylene Networks Crosslinked in Solution written by Abe Posthuma de Boer and published by . This book was released on 1980 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Thermoplastic Polyesters written by Stoyko Fakirov and published by Wiley-VCH Verlag GmbH. This book was released on 2002 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers current knowledge on all aspects of polyester synthesis, structure, properties (chemical, physical and application relevant) and recycling. The most important technical polyesters are presented in detailed chapters, homogeneous polymers as well as copolymers, blends and high-performance reinforced polyester materials are discussed. This book is directed to chemists, physicists and engineers working in research, development and application of polymers.

Download or read book Account of Arnold s Campaign Against Quebec written by John Joseph Henry and published by . This book was released on 1877 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Papers Presented at the Meeting written by American Chemical Society. Division of Polymer Chemistry and published by . This book was released on 1978 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biodegradable Polymers written by Margarita del Rosario Salazar and published by CRC Press. This book was released on 2023-03-16 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic concepts on biodegradable biopolymer science are presented in this book, as well as techniques, analyses, standards, and essential criteria for the characterization of biodegradable materials obtained from biopolymers. The development and innovation of products and processes considering the environment are highlighted in this book. All of the applications described have been discussed from the point of view of sustainability. Additionally, this book highlights that biodegradability is a great burden when trying to replace, modify, and/or design existing products, and processes that are highly polluting. Finally, the present book concludes with reflections on the development of biopolymers in different areas, and some of their consequences depending on their biodegradability.

Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.

Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by Elsevier. This book was released on 2023-11-24 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Sustainability, Materials, and Applications, Third Edition presents the fundamentals of plastics engineering, helping bring readers up-to-speed on new plastics, materials, processing and technology. This revised and expanded edition includes the latest developments in plastics, including areas such as biodegradable and biobased plastics, plastic waste, smart polymers, and 3D printing. Sections cover traditional plastics, elastomeric materials, bio-based materials, additives, colorants, fillers and plastics processing, including various key technologies, plastic recycling and waste. The final part of the book examines design and applications, with substantial updates made to reflect advancements in technology, regulations, and commercialization. Throughout the handbook, the focus is on engineering aspects of producing and using plastics. Properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Offers an ideal reference for new engineers, experienced practitioners and researchers entering a new field or evaluating a new technology - Provides an authoritative source of practical advice, presenting guidance that will lead to cost savings and process improvements - Includes the latest technology, covering 3D printing, smart polymers and thorough coverage of biobased and biodegradable plastics

Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.

Download or read book Physical Properties of Polymers written by James Mark and published by Cambridge University Press. This book was released on 2004-03-25 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this well known textbook discusses the diverse physical states and associated properties of polymeric materials. The contents of the book have been conveniently divided into two general parts, 'Physical States of Polymers' and 'Characterization Techniques'. Written by seven of the leading figures in the polymer science community, this third edition has been thoroughly updated and expanded. As in the second edition, all of the chapters contain general introductory material and comprehensive literature citations designed to give newcomers to the field an appreciation of the subject and how it fits into the general context of polymer science. Containing numerous problem sets and worked examples this third edition provides enough core material for a one semester survey course at the advanced undergraduate or graduate level.

Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1992-07 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Constitutive Models for Rubber XII written by Claudia Marano and published by CRC Press. This book was released on 2022-12-22 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive Models for Rubber XII is a comprehensive compilation of the oral and poster contributions to the XII European Conference on Constitutive Models for Rubbers (Milan, Italy, 7-9 September 2022). As the first after the COVID Pandemic, the XII edition again brought together researchers from the industry and the academia working in the field of elastomer technology and science to discuss the most recent advancement in the following topics: • Constitutive models • Micro-structural investigations • Experimental methods and characterization • Numerical methods • Fatigue and fracture • Aging • Industrial applications • Smart elastomer materials: applications and modelling Including more than 80 contributions from authors from around the world, this book aims at professionals and academics interested in elastomer technology and science.

Download or read book Pressure Sensitive Adhesives and Applications written by Istvan Benedek and published by CRC Press. This book was released on 2004-02-03 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure-Sensitive Adhesives and Applications, Second Edition explains how pressure-sensitive adhesives (PSAs) work, why they are used, and the technology used to manufacture them. This second edition features the latest developments in the field. Dr. Benedek discusses the factors that affect the rheology and special flow characteristics responsible for the adhesivity of liquid and solid PSAs. His book explores the viscoelastic behavior of PSAs, and compares them to plastics, rubbers, and polymers properties and examines the parameters that influence the conversion process of PSAs from the coating of carrier materials to the properties of the final laminate. The author covers adhesion/cohesion balance, time-temperature dependence of pressure sensitivity, chemical composition, coating properties, and coating processes affect the adhesive properties of PSA and their end products and how application-specific performance indices are used to determine the formulation and manufacture of raw materials. In addition, up-to-date coating machines, converting technology, and environmental considerations in the manufacture of PSA final products as well as industry-specific methods of testing for quality assurance and control are discussed. Pressure-Sensitive Adhesives and Applications, Second Edition combines the theoretical basis of pressure sensitivity with the practical aspects of manufacturing, testing, and use of PSAs. Readers are offered an exhaustive as well as comparative look at the engineering of plastics, adhesives, and pressure-sensitives, resulting in an indispensable, up-to-date reference for adhesive and polymer chemists and technologists.