Download or read book Plastic Deformation and Strain Hardening written by P.O. Kettunen and published by Trans Tech Publications Ltd. This book was released on 2003-03-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is based upon lectures given during a well-received course on physical metallurgy and originally intended for students specializing in fields related to metallic materials. But, as the author points out, metallic materials are the most widely investigated group of materials and their study therefore gives a good basis for understanding how other materials can be made to reveal interrelationships between their structures and properties; especially with regard to those properties associated with strain. Similar types of rule can then be applied to other materials, in spite of their apparent differences.

Download or read book Physics of Strain Hardening of Structural Steels written by Yu.F. Ivanov and published by Materials Research Forum LLC. This book was released on 2023-11-05 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reviews new research in the area of deformation mechanisms of structural steels and the possibilities to control the process of strain hardening. Topics covered include: The bainite, martensite and pearlite structure of these steels; the strengthening mechanisms of quenched steel; the evolution of phase composition and defect sub-structure of bainitic steel under deformation; the hardening mechanisms of bainitic steels; and the strain hardening of structural steels with pearlite structure. Keywords: Structural Steels, Strain Hardening, Uniaxial Compression, Martensite Structure, Pearlite Structure, Bainite Structure, Plasticity, Fracture Toughness, Tribological Properties, Wear Resistance, Strength Properties, Corrosion Resistant Steel, Impact Strength, Dislocation Density, Weldability.

Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.

Download or read book Strain Hardening Cementitious Composites written by Minoru Kunieda and published by Springer Nature. This book was released on 2023-01-31 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations, and applications in the field of cementitious composites. It covers advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The contents reflect the outcomes of the activities of SHCC5 (International RILEM Workshop on Strain Hardening Cementitious Composites) in 2022.

Download or read book Strain Hardening Cementitious Composites material development performance characterization structural and 3D printing applications written by Kequan Yu and published by Frontiers Media SA. This book was released on 2022-05-10 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stress and Strain Distributions in a Thick walled Cylinder of Strain hardening Material Elastic plastically Strained by Internal Pressure written by Chang Keng Liu and published by . This book was released on 1965 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: An attempt is made to extend Allen and Sopwith's solution for an elastic-plastic thick-walled cylinder of ideally plastic material to strain-hardening material. Tresca's criterion of yielding is modified so that the effective stress (usually considered a function of the effective strain) is proportional to a simple power function of the radius in the plastic zone. An analysis of Allen and Sopwith's solution for ideally plastic material seems to support and justify the proposed modification of the yielding criterionZ The exponent of the power function is taken as -3/2, -5/4, 1, and -1/2, in each case yielding an analytic solution corresponding to a particular strain-hardening material. Examples worked are for the case of plane strain and for a ratio of outer to inner radii of 2. 0. When the exponent is taken to be zero, the solution becomes identical to that of Allen and Sopwith. For exponents other than the five mentioned above, numerical or graphical methods of integration may be used.

Download or read book Atlas of Stress strain Curves written by ASM International and published by ASM International. This book was released on 2002-01-01 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 1400 curves, almost three times as many as in the 1987 edition. The curves are normalized in appearance to aid making comparisons among materials. All diagrams include metric units, and many also include U.S. customary units

Download or read book Ultimate Limit State Design of Steel Plated Structures written by Jeom Kee Paik and published by John Wiley & Sons. This book was released on 2003-03-28 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel plated structures are important in a variety of marine and land-based applications, including ships, offshore platforms, power and chemical plants, box girder bridges and box girder cranes. The basic strength members in steel plated structures include support members (such as stiffeners and plate girders), plates, stiffened panels/grillages and box girders. During their lifetime, the structures constructed using these members are subjected to various types of loading which is for the most part operational, but may in some cases be extreme or even accidental. Ultimate Limit State Design of Steel Plated Structures reviews and describes both fundamentals and practical design procedures in this field. The derivation of the basic mathematical expressions is presented together with a thorough discussion of the assumptions and the validity of the underlying expressions and solution methods. Particularly valuable coverage in the book includes: * Serviceability and the ultimate limit state design of steel structural systems and their components * The progressive collapse and the design of damage tolerant structures in the context of marine accidents * Age related structural degradation such as corrosion and fatigue cracks Furthermore, this book is also an easily accessed design tool which facilitates learning by applying the concepts of the limit states for practice using a set of computer programs which can be downloaded. In addition, expert guidance on mechanical model test results as well as nonlinear finite element solutions, sophisticated design methodologies useful for practitioners in industries or research institutions, selected methods for accurate and efficient analyses of nonlinear behavior of steel plated structures both up to and after the ultimate strength is reached, is provided. Designed as both a textbook and a handy reference, the book is well suited to teachers and university students who are approaching the limit state design technology of steel plated structures for the first time. The book also meets the needs of structural designers or researchers who are involved in civil, marine and mechanical engineering as well as offshore engineering and naval architecture.

Download or read book Influence of Deuteron Bombardment and Strain Hardening on Mild Steel written by Robert Anderson Meyer and published by . This book was released on 1954 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Strain hardening and Interaction Effects on the Growth of Voids in Ductile Fracture written by Dennis Michael Tracey and published by . This book was released on 1968 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and coalescence of voids is a common mechanism of fracture in ductile materials. Analytical work on the problem to date has dealt mainly with isolated voids in perfectly plastic materials, so that strain hardening and interactions between neighboring voids have been neglected. These features of void growth are examined here, but only for a simple geometrical configuration. In particular, the growth of single infinitely long cylindrical voids in bodies of rigid-plastic, strain-hardening material is considered. Bodies with both finite and infinite dimensions normal to the void surface are included in the analysis. The exact relation among the pertinent variables: transverse stress, axial strain, hardening coefficient, void strain and void growth rate is presented. Solution via a bounding technique is given for two general cases. The first case is that of an imposed constant void growth rate and the second case is an imposed constant transverse stress. The results show a decelerating effect of hardening on void growth. Application to the ductile fracture problem of void growth in the neck of a tensile specimen demonstrates the accelerating effect of void growth due to interactions between voids. (Author).

Download or read book Heterostructured Materials written by Xiaolei Wu and published by CRC Press. This book was released on 2021-11-24 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterostructured (HS) materials represent an emerging class of materials that are expected to become a major research field for the communities of materials, mechanics, and physics in the next couple of decades. One of the biggest advantages of HS materials is that they can be produced by large-scale industrial facilities and technologies and therefore can be commercialized without the scaling up and high-cost barriers that are often encountered by other advanced materials. This book collects recent papers on the progress in the field of HS materials, especially their fundamental physics. The papers are arranged in a sequence of chapters that will help new researchers entering the field to have a quick and comprehensive understanding of HS materials, including the fundamentals and recent progress in their processing, characterization, and properties.

Download or read book Handbook of Metallurgical Process Design written by George E. Totten and published by CRC Press. This book was released on 2004-05-25 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing an extensive array of procedures in hot and cold forming, casting, heat treatment, machining, and surface engineering of steel and aluminum, this comprehensive reference explores a vast range of processes relating to metallurgical component design-enhancing the production and the properties of engineered components while reducing manufacturing costs. It surveys the role of computer simulation in alloy design and its impact on material structure and mechanical properties such as fatigue and wear. It also discusses alloy design for various materials, including steel, iron, aluminum, magnesium, titanium, super alloy compositions and copper.

Download or read book Elastic plastic Torsion Problem for Strain hardening Materials written by Alexander Mendelson and published by . This book was released on 1968 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced High Strength Steel And Press Hardening Proceedings Of The 2nd International Conference Ichsu2015 written by Yisheng Zhang and published by World Scientific. This book was released on 2016-03-11 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings brings together one hundred and ten selected papers presented at the 2nd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU2015), which was held in Changsha, China, during October 15-18, 2015.To satisfy the increasingly urgent requirement of reducing the weight of vehicle structures and increasing passenger safety, ICHSU2015 provided an excellent international platform for researchers to share their knowledge and results in theory, methodology and applications of advanced high strength steel and press hardening technology.This conference aroused great interests and attentions from domestic and foreign researchers in hot stamping field. Experts in this field from Australia, China, Germany and Sweden, contributed to the collection of research results and developments. The papers cover almost all the current topics of advanced high strength steel and press hardening technology.

Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.

Download or read book Physics of Strain Hardening of Structural Steels written by Yu.F. Ivanov and published by Materials Research Forum LLC. This book was released on 2023-11-05 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reviews new research in the area of deformation mechanisms of structural steels and the possibilities to control the process of strain hardening. Topics covered include: The bainite, martensite and pearlite structure of these steels; the strengthening mechanisms of quenched steel; the evolution of phase composition and defect sub-structure of bainitic steel under deformation; the hardening mechanisms of bainitic steels; and the strain hardening of structural steels with pearlite structure. Keywords: Structural Steels, Strain Hardening, Uniaxial Compression, Martensite Structure, Pearlite Structure, Bainite Structure, Plasticity, Fracture Toughness, Tribological Properties, Wear Resistance, Strength Properties, Corrosion Resistant Steel, Impact Strength, Dislocation Density, Weldability.

Download or read book Work hardening of dual phase steel written by Rieger, Florian and published by KIT Scientific Publishing. This book was released on 2016-07-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dual-phase steels exhibit good mechanical properties due to a microstructure of strong martensitic inclusions embedded in a ductile ferritic matrix. This work presents a two-scale model for the underlying work-hardening effects; such as the distinctly different hardening rates observed for high-strength dual-phase steels. The model is based on geometrically necessary dislocations and comprises the average microstructural morphology as well as a direct interaction between the constituents.