Download or read book Powders and Bulk Solids written by Dietmar Schulze and published by Springer Nature. This book was released on 2021-09-02 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book concentrates on powder flow properties, their measurement and applications. These topics are explained starting from the interactions between individual particles up to the design of silos. A wide range of problems are discussed – such as flow obstructions, segregation, and vibrations. The goal is to provide a deeper understanding of the powder flow, and to show practical solutions.
Download or read book Gravity Flow of Bulk Solids written by Andrew W. Jenike and published by . This book was released on 1961 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handling of Bulk Solids written by P. A. Shamlou and published by Elsevier. This book was released on 2013-10-22 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-materials handling and processing along with their prevention. Worked-out examples are included at the end of each chapter to familiarize the reader with the numerical manipulations and orders of magnitude of various parameters which occur in the subject of bulk solids handling. Because of the complicated form of most of the design equations involved, the computer is an ideal vehicle for the solution of many design problems in bulk solids handling. This book is suitable for advanced undergraduate and postgraduate levels as well as for practitioners in industry.
Download or read book Storage and Flow of Solids written by Andrew W. Jenike and published by . This book was released on 1970 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulk Solids Handling written by C.R. Woodcock and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding ofthe properties and the handling characteristics of liquids and gases has long been regarded as an essential requirement for most practising engineers. It is therefore not surprising that, over the years, there has been a regular appearance of books dealing with the fundamentals of fluid mechanics, fluid flow, hydraulics and related topics. What is surprising is that there has been no parallel development of the related discipline of Bulk Solids Handling, despite its increasing importance in modern industry across the world. It is only very recently that a structured approach to the teaching, and learning, of the subject has begun to evolve. A reason for the slow emergence of Bulk Solids Handling as an accepted topic of study in academic courses on mechanical, agricultural, chemical, mining and civil engineering is perhaps that the practice is so often taken for granted. Certainly the variety of materials being handled in bulk is almost endless, ranging in size from fine dust to rocks, in value from refuse to gold, and in temperature from deep-frozen peas to near-molten metal.
Download or read book Flow Assurance Solids in Oil and Gas Production written by Jon Steinar Gudmundsson and published by CRC Press. This book was released on 2017-09-13 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The precipitation and deposition of solids are a major challenge in the production of oil and gas. Flow assurance solids are formed because of unavoidable changes in temperature, pressure and composition of the oil-gas-water flowstream, from reservoir conditions to processing conditions. The advent of subsea production and the increased exploitation of heavy crudes have made flow assurance issues dominant in ensuring efficient and safe exploitation of hydrocarbon assets. Five troublesome flow assurance solids are described in the book: asphaltene, paraffin wax, natural gas hydrate, naphthenate and inorganic scale. These big-five solids are presented in stand-alone chapters. Each chapter is designed to be readable without clutter. Derivations of equations and descriptions of supporting details are given in several appendices. The book is intended for professional engineers and natural scientist working in E&P companies, engineering companies, service companies and specialized companies. An understanding of the big-five solids is required throughout the lifetime of oil and gas assets, from early development to abandonment. The technical, safety and environmental risks associated with deposition problems in near-wellbore formations, production tubing, wellhead equipment, flowlines and processing facilities, are relevant for decisions in the oil and gas industry and in outside regulatory and financial entities.
Download or read book Bulk Solids Handling written by Don McGlinchey and published by Wiley-Blackwell. This book was released on 2008-04-28 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Bulk Solids Handling: Equipment Selection and Operation provides an overview of the major technologies involved in the storage and handling of particulate materials from large grains to fine cohesive materials. - Topics covered include characterisation of individual particles and bulk particulate materials, silo design for strength and flow, pneumatic conveying systems, mechanical conveying, and small scale operations. - Guidance is given on appropriate equipment choices depending on the type of material to be handled, and applications and limitations of current bulk solids handling equipment are discussed."--Jacket.
Download or read book Unit Operations of Particulate Solids written by Enrique Ortega-Rivas and published by CRC Press. This book was released on 2016-04-19 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for practicing engineers and engineers in training, this book covers the most important operations involving particulate solids. Through clear explanations of theoretical principles and practical laboratory exercises, the text provides an understanding of the behavior of powders and pulverized systems. It also helps readers develop skills for operating, optimizing, and innovating particle processing technologies and machinery in order to carry out industrial operations. The author explores common bulk solids processing operations, including milling, agglomeration, fluidization, mixing, and solid-fluid separation.
Download or read book Characterisation of Bulk Solids written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, from minerals processing to bulk and fine chemicals, and the food and pharmaceutical industries, yet is rarely found in the curricula of engineering or chemistry departments. With contributions from leading authors in their respective fields, Characterisation of Bulk Solids provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. The reader will then be in a better position to diagnose solids handling and processing problems in industry, and to deal with experts and equipment suppliers from an informed standpoint. Written for post-graduate engineers, chemical scientists and technologists at all stages of their industrial career, the book will also serve as an ideal primer in any of the specialist areas to inform further study.
Download or read book Energy Storage written by Robert Huggins and published by Springer. This book was released on 2015-11-13 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Storage explains the underlying scientific and engineering fundamentals of all major energy storage methods. These include the storage of energy as heat, in phase transitions and reversible chemical reactions, and in organic fuels and hydrogen, as well as in mechanical, electrostatic and magnetic systems. Updated coverage of electrochemical storage systems considers exciting developments in materials and methods for applications such as rapid short-term storage in hybrid and intermittent energy generation systems, and battery optimization for increasingly prevalent EV and stop-start automotive technologies. This nuanced coverage of cutting-edge advances is unique in that it does not require prior knowledge of electrochemistry. Traditional and emerging battery systems are explained, including lithium, flow and liquid batteries. Energy Storage provides a comprehensive overview of the concepts, principles and practice of energy storage that is useful to both students and professionals.
Download or read book Divided Solids Mechanics written by Jean-Paul Duroudier and published by Elsevier. This book was released on 2016-10-14 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Divided Solids Mechanics, part of the Industrial Equipment for Chemical Engineering set, defines how to perform the selection and calculation of equipment needed in the basic operations of process engineering, offering reliable and simple methods, with this volume providing a comprehensive focus divided solids mechanics. Throughout these concise and easy-to-use books, the author uses his vast practical experience and precision knowledge of global research to present an in-depth study of a variety of aspects within the field of chemical engineering. - Presents a guide that is particularly innovative in this field of study - Contains measurements of the mechanical properties of divided solids - Includes methods of discrete elements (of distinct particles) - Provides the properties of powders for pressing
Download or read book Powder and Bulk Solids Handling Processes written by Koichi Iinoya and published by CRC Press. This book was released on 1988-07-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some key points in the instrumentation of powder handling processes and provides readers with sufficient knowledge of instrumentation to act as a base for the development of new instruments. It is helpful for instrumentation engineers in powder and bulk solid processes.
Download or read book Handbook of Conveying and Handling of Particulate Solids written by A. Levy and published by Elsevier. This book was released on 2001-10-22 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents comprehensive coverage of the technology for conveying and handling particulate solids. Each chapter covers a different topic and contains both fundamentals and applications. Usually, each chapter, or a topic within a chapter, starts with one of the review papers. Chapter 1 covers the characterization of the particulate materials. Chapter 2 covers the behaviour of particulate materials during storage, and presents recent developments in storage and feeders design and performance. Chapter 3 presents fundamental studies of particulate flow, while Chapters 4 and 5 present transport solutions, and the pitfalls of pneumatic, slurry, and capsule conveying. Chapters 6, 7 and 8 cover both the fundamentals and development of processes for particulate solids, starting from fluidisation and drying, segregation and mixing, and size-reduction and enlargement. Chapter 9 presents environmental aspects and the classification of the particulate materials after they have been handled by one of the above-mentioned processes. Finally, Chapter 10 covers applications and developments of measurement techniques that are the heart of the analysis of any conveying or handling system.
Download or read book Production Handling and Characterization of Particulate Materials written by Henk G. Merkus and published by Springer. This book was released on 2015-11-26 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents most techniques and methods that have been developed by material scientists, chemists, chemical engineers and physicists for the commercial production of particulate materials, ranging from the millimeter to the nanometer scale. The scope includes the physical and chemical background, experimental optimization of equipment and procedures, as well as an outlook on future methods. The books addresses issues of industrial importance such as specifications, control parameter(s), control strategy, process models, energy consumption and discusses the various techniques in relation to potential applications. In addition to the production processes, all major unit operations and characterization methods are described in this book. It differs from other books which are devoted to a single technique or a single material. Contributors to this book are acknowledged experts in their field. The aim of the book is to facilitate comparison of the different unit operations leading to optimum equipment choices for the production, handling and storage of particulate materials. An advantage of this approach is that unit operations that are common in one field of application are made accessible to other fields. The overall focus is on industrial application and the book includes some concrete examples. The book is an essential resource for students or researchers who work in collaboration with manufacturing industries or who are planning to make the switch from academia to industry.
Download or read book Guidelines for Safe Handling of Powders and Bulk Solids written by Stanley S. Grossel and published by Wiley-AIChE. This book was released on 2005 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powders and bulk solids, handled widely in the chemical, pharmaceutical, agriculture, smelting, and other industries present unique fire, explosion, and toxicity hazards. Indeed, substances which are practically inert in consolidated form may become quite hazardous when converted to powders and granules. The U.S. Chemical Safety and Hazard Investigation Board is currently investigating dust explosions that occured in 2003 at WestPharma, CTA Acoustics, and Hayes-Lemmerz, and is likely to recommend that companies that handle powders or whose operations produce dust pay more attention to understanding the hazards that may exist at their facility. This new CCPS guidelines book will discuss the types of hazards that can occur in a wide range of process equipment and with a wide range of substances, and will present measures to address these hazards.
Download or read book Bulk Solids written by Peter C. Arnold and published by . This book was released on 1978 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Steel Bins for Storage of Bulk Solids written by Edwin Henry Gaylord and published by Prentice Hall. This book was released on 1984 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
