Download or read book Chemical Vapor Deposition written by S Neralla and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of chemical vapor deposition (CVD) methods and recent advances in developing novel materials for application in various fields. CVD has now evolved into the most widely used technique for growth of thin films in electronics industry. Several books on CVD methods have emerged in the past, and thus the scope of this book goes beyond providing fundamentals of the CVD process. Some of the chapters included highlight current limitations in the CVD methods and offer alternatives in developing coatings through overcoming these limitations.
Download or read book Properties and Applications of Silicon Carbide written by Rosario Gerhardt and published by BoD – Books on Demand. This book was released on 2011-04-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we explore an eclectic mix of articles that highlight some new potential applications of SiC and different ways to achieve specific properties. Some articles describe well-established processing methods, while others highlight phase equilibria or machining methods. A resurgence of interest in the structural arena is evident, while new ways to utilize the interesting electromagnetic properties of SiC continue to increase.
Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
Download or read book Classical And Quantum Dynamics In Condensed Phase Simulations Proceedings Of The International School Of Physics written by Bruce J Berne and published by World Scientific. This book was released on 1998-06-17 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: The school held at Villa Marigola, Lerici, Italy, in July 1997 was very much an educational experiment aimed not just at teaching a new generation of students the latest developments in computer simulation methods and theory, but also at bringing together researchers from the condensed matter computer simulation community, the biophysical chemistry community and the quantum dynamics community to confront the shared problem: the development of methods to treat the dynamics of quantum condensed phase systems.This volume collects the lectures delivered there. Due to the focus of the school, the contributions divide along natural lines into two broad groups: (1) the most sophisticated forms of the art of computer simulation, including biased phase space sampling schemes, methods which address the multiplicity of time scales in condensed phase problems, and static equilibrium methods for treating quantum systems; (2) the contributions on quantum dynamics, including methods for mixing quantum and classical dynamics in condensed phase simulations and methods capable of treating all degrees of freedom quantum-mechanically.
Download or read book Nanostructured Coatings written by Albano Cavaleiro and published by Springer Science & Business Media. This book was released on 2007-02-19 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers practical insight into a broad range of fields related to hard coatings, from their deposition and characterization up to the hardening and deformation mechanisms allowing the interpretation of results. The text examines relationships between structure/microstructure and mechanical properties from fundamental concepts, through types of coatings, to characterization techniques. The authors explore the search for coatings that can satisfy the criteria for successful implementation in real mechanical applications.
Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.
Download or read book Silicon written by Paul Siffert and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: With topics ranging from epitaxy through lattice defects and doping to quantum computation, this book provides a personalized survey of the development and use of silicon, the basis for the revolutionary changes in our lives sometimes called "The Silicon Age." Beginning with the very first developments more than 50 years ago, this reports on all aspects of silicon and silicon technology up to its use in exciting new technologies, including a glance at possible future developments.
Download or read book Hydrogen in Intermetallic Compounds II written by Louis Schlapbach and published by Springer Science & Business Media. This book was released on 2006-01-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of hydrogen in an on metals and alloys is important in a number ofdisciplines including solid-state physics, materials science, physical chemistry, and energy technology. This volume treats the dynamics of hydrogen in intermetallic compounds, surface properties, kinetics, and applications of metal hydrides in energy technology. In addition, selected experimental methods are described. The introductory chapter will enable non-specialists to gain an overall picture of the field and to appreciate the relevant scientific issue. The companion volume, Hydrogene in Intermetallic Compounds I, was published as Vol. 63 of Topics in Applied Physics.
Download or read book Cathodic Arcs written by André Anders and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cathodic arcs are among the longest studied yet least understood objects in science. Plasma-generating, tiny spots appear on the cathode; they are highly dynamic and hard to control. With an approach emphasizing the fractal character of cathode spots, strongly fluctuating plasma properties are described such as the presence of multiply charged ions that move with supersonic velocity. Richly illustrated, the book also deals with practical issues, such as arc source construction, macroparticle removal, and the synthesis of dense, well adherent coatings. The book spans a bridge from plasma physics to coatings technology based on energetic condensation, appealing to scientists, practitioners and graduate students alike.
Download or read book Carbon written by Tapan Gupta and published by Springer. This book was released on 2018-09-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: All living things contain carbon in some form, as it is the primary component of macromolecules including proteins, lipids, nucleic acids (RNA and DNA), and carbohydrates. As a matter of fact, it is the backbone of all organic (chemistry) compounds forming different kinds of bonds. Carbon: The Black, the Gray and the Transparent is not a complete scientific history of the material, but a book that describes key discoveries about this old faithful element while encouraging broader perspectives and approaches to its research due to its vast applications. All allotropes of carbon are described in this book, along with their properties, uses, and methods of procurement or manufacturing. Black carbon is represented by coal, gray carbon is represented by graphite, and transparent carbon is represented by diamond.
Download or read book Defects and Impurities in Silicon Materials written by Yutaka Yoshida and published by Springer. This book was released on 2016-03-30 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes the importance of the fascinating atomistic insights into the defects and the impurities as well as the dynamic behaviors in silicon materials, which have become more directly accessible over the past 20 years. Such progress has been made possible by newly developed experimental methods, first principle theories, and computer simulation techniques. The book is aimed at young researchers, scientists, and technicians in related industries. The main purposes are to provide readers with 1) the basic physics behind defects in silicon materials, 2) the atomistic modeling as well as the characterization techniques related to defects and impurities in silicon materials, and 3) an overview of the wide range of the research fields involved.
Download or read book Handbook of Maleic Anhydride Based Materials written by Osama M. Musa and published by Springer. This book was released on 2016-09-22 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on syntheses and properties, production processes, and applications of maleic anhydride and maleic anhydride derived products – all in one text. This handbook provides a comprehensive overview of maleic anhydride chemistry and applications from the professional perspective. With chapters written by leading R&D scientists from the chemical industry, and edited by the Vice President and ASI Technology Chief at Ashland Specialty Ingredients (ASI), Dr. Osama M. Musa, readers will find a unique perspective and summary of the latest advancements in the field of maleic anhydride science. Maleic anhydride is produced industrially on large scale (10E3 kt/annum). Its rich chemistry makes it an important raw material for numerous products and processes (e.g. for applications in polymers and coatings), many of which are covered in this handbook for the first time in a comprehensive manner. The broad scope spans topics ranging from production techniques (including topics such as processes, catalysis, trouble-shooting), synthesis and properties of small and polymeric maleic anhydride based compounds (focusing on industrially relevant compounds as well as emerging areas of importance) and in-depth and broad discussions of commercial maleic anhydride based applications.
Download or read book A Dictionary of Chemical Engineering written by Carl Schaschke and published by OUP Oxford. This book was released on 2014-01-09 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Dictionary of Chemical Engineering is one of the latest additions to the market leading Oxford Paperback Reference series. In over 3,400 concise and authoritative A to Z entries, it provides definitions and explanations for chemical engineering terms in areas including: materials, energy balances, reactions, separations, sustainability, safety, and ethics. Naturally, the dictionary also covers many pertinent terms from the fields of chemistry, physics, biology, and mathematics. Useful entry-level web links are listed and regularly updated on a dedicated companion website to expand the coverage of the dictionary. Comprehensively cross-referenced and complemented by over 60 line drawings, this excellent new volume is the most authoritative dictionary of its kind. It is an essential reference source for students of chemical engineering, for professionals in this field (as well as related disciplines such as applied chemistry, chemical technology, and process engineering), and for anyone with an interest in the subject.
Download or read book Catalyst Preparation written by John Regalbuto and published by CRC Press. This book was released on 2016-04-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text explores the optimization of catalytic materials through traditional and novel methods of catalyst preparation, characterization, and monitoring for oxides, supported metals, zeolites, and heteropolyacids. It focuses on the synthesis of bulk materials and of heterogeneous materials, particularly at the nanoscale. The final chapters examine pretreatment, drying, finishing effects, and future applications involving catalyst preparation and the technological advances necessary for continued progress. Topics also include heat and mass transfer limitations, computation methods for predicting properties, and catalyst monitoring on laboratory and industrial scales.
Download or read book Carbon Allotropes Metal Complex Chemistry Properties and Applications written by Boris Ildusovich Kharisov and published by Springer. This book was released on 2019-01-02 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed description of metal-complex functionalized carbon allotrope forms, including classic (such as graphite), rare (such as M- or T-carbon), and nanoforms (such as carbon nanotubes, nanodiamonds, etc.). Filling a void in the nanotechnology literature, the book presents chapters generalizing the synthesis, structure, properties, and applications of all known carbon allotropes. Metal-complex composites of carbons are described, along with several examples of their preparation and characterization, soluble metal-complex carbon composites, cost-benefit data, metal complexes as precursors of carbon allotropes, and applications. A lab manual on the synthesis and characterization of carbon allotropes and their metal-complex composites is included. Provides a complete description of all carbon allotropes, both classic and rare, as well as carbon nanostructures and their metal-complex composites; Contains a laboratory manual of experiments on the synthesis and characterization of metal-complex carbon composites; Discusses applications in diverse fields, such as catalysis on supporting materials, water treatment, sensors, drug delivery, and devices.
Download or read book Fundamentals Properties and Applications of Polymer Nanocomposites written by Joseph H. Koo and published by Cambridge University Press. This book was released on 2016-10-31 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused primarily on polymer nanocomposites, based on the author's research experience as well as open literature. The environmental health and safety aspects of nanomaterials and polymer nanocomposites, risk assessment and safety standards, and fire toxicity of polymer nanocomposites, are studied. In the final chapter, a brief overview of opportunities, trends, and challenges of polymer nanocomposites are included. Throughout the book, the theme is developed that polymer nanocomposites are a whole family of polymeric materials whose properties are capable of being tailored to meet specific applications. This volume serves as a general introduction to students and researchers just entering the field and to scholars from other subfields seeking information.
Download or read book Fundamentals of Microfabrication and Nanotechnology Three Volume Set written by Marc J. Madou and published by CRC Press. This book was released on 2018-12-14 with total page 1983 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, Fundamentals of Microfabrication and Nanotechnology continues to provide the most complete MEMS coverage available. Thoroughly revised and updated the new edition of this perennial bestseller has been expanded to three volumes, reflecting the substantial growth of this field. It includes a wealth of theoretical and practical information on nanotechnology and NEMS and offers background and comprehensive information on materials, processes, and manufacturing options. The first volume offers a rigorous theoretical treatment of micro- and nanosciences, and includes sections on solid-state physics, quantum mechanics, crystallography, and fluidics. The second volume presents a very large set of manufacturing techniques for micro- and nanofabrication and covers different forms of lithography, material removal processes, and additive technologies. The third volume focuses on manufacturing techniques and applications of Bio-MEMS and Bio-NEMS. Illustrated in color throughout, this seminal work is a cogent instructional text, providing classroom and self-learners with worked-out examples and end-of-chapter problems. The author characterizes and defines major research areas and illustrates them with examples pulled from the most recent literature and from his own work.
