Download or read book Radiation Sterilization for Health Care Products written by Barry P. Fairand and published by CRC Press. This book was released on 2001-09-26 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on how the radiation process works and how it is applied in sterilizing medical devices and healthcare products, Radiation Sterilization for Health Care Products covers recent developments in radiation technology such as e-beams, gamma rays, and x-rays. The author discusses the design and operation of irradiators as well as factors that affect cost and efficiency. He offers readers practical insights on this critical step in healthcare product manufacturing, its current uses, and its related cost concerns. Authortitative and comprehensive, the book brings togehter information scattered throughout the literature into one convenient resource.
Download or read book Sterilization Validation and Routine Operation Handbook 2001 written by Anne F Booth and published by CRC Press. This book was released on 2017-11-22 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: The validation and radiation sterilization process for biomaterials and medical devices requires careful planning to ensure regulatory compliance followed by precise accuracy in execution and documentation. This in-depth guide details all steps from prevalidation planning to final report and ongoing monitoring and control. Sterilization Validation & Routine Operation Handbook: Radiation provides a framework for the validation and routine operation of an irradiation sterilization process. The guidance presented complies with ANSI/AAMI/ISO 11137: 1994, Sterilization of health care product-Requirements for validation and routine control-Radiation sterilization and the newly published AAMI substantiation of 25 kGy using VDmax procedure. The author discusses methods to aid in comprehending the requirements in these standards. She also provides practical procedures for the validation and routine monitoring and control of specific gamma and electron beam radiation sterilization processes. Background chapters provide needed information on radiation sterilization technologies, sterilization microbiology, validation approaches and working with a radiation sterilization contractor. Much of the information in this new book is presented in convenient tables and charts, with diagrams and other schematics that simply illustrate appropriate validation methodologies. Sterilization Validation & Routine Operation Handbook: Radiation brings together in one resource information scattered throughout many documents and will be useful to all those involved in the sterilization of medical materials, drugs and devices.
Download or read book Sterilization Validation and Routine Operation Handbook 2001 written by Anne F Booth and published by CRC Press. This book was released on 2017-11-22 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The validation and radiation sterilization process for biomaterials and medical devices requires careful planning to ensure regulatory compliance followed by precise accuracy in execution and documentation. This in-depth guide details all steps from prevalidation planning to final report and ongoing monitoring and control. Sterilization Validation & Routine Operation Handbook: Radiation provides a framework for the validation and routine operation of an irradiation sterilization process. The guidance presented complies with ANSI/AAMI/ISO 11137: 1994, Sterilization of health care product-Requirements for validation and routine control-Radiation sterilization and the newly published AAMI substantiation of 25 kGy using VDmax procedure. The author discusses methods to aid in comprehending the requirements in these standards. She also provides practical procedures for the validation and routine monitoring and control of specific gamma and electron beam radiation sterilization processes. Background chapters provide needed information on radiation sterilization technologies, sterilization microbiology, validation approaches and working with a radiation sterilization contractor. Much of the information in this new book is presented in convenient tables and charts, with diagrams and other schematics that simply illustrate appropriate validation methodologies. Sterilization Validation & Routine Operation Handbook: Radiation brings together in one resource information scattered throughout many documents and will be useful to all those involved in the sterilization of medical materials, drugs and devices.
Download or read book Sterile Drug Products written by Michael J. Akers and published by CRC Press. This book was released on 2016-04-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sterile Drug Products: Formulation, Packaging, Manufacturing, and Quality teaches the basic principles of the development and manufacture of high quality sterile dosage forms. The author has 38 years of experience in the development and manufacture of sterile dosage forms including solutions, suspensions, ophthalmics and freeze dried products. This
Download or read book Sterilization of Medical Devices written by Anne Booth and published by Routledge. This book was released on 2018-12-12 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents vital information on international sterilization standards and guidance on practical application of these standards in the manufacturing process. It covers validation, industrial sterilization methods, emerging sterilization techniques, laboratory testing, manufacturing of sterile devices, and device reuse. Excerpted from The Validator, edited by Anne F. Booth, more than fifty experts share their knowledge of current technologies in easy-to-understand articles that establish methods to ensure compliance. Contents include reviews of ISO sterilization standards, industrial sterilization methods and technologies, and support testing methodologies.
Download or read book Radiation In Tissue Banking Basic Science And Clinical Applications Of Irradiated Tissue Allografts written by Abdul Aziz Nather and published by World Scientific Publishing Company. This book was released on 2007-04-20 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book discusses the need for gamma irradiation in the processing of tissue allografts. With particular emphasis on tissue banking in the Asia-Pacific region, it covers a wide range of issues in tissue banking, including the basic science of radiation, quality control of the irradiation process, and clinical applications of irradiated bone grafts and amnions.A compulsory textbook for the well-regarded Singapore-based IAEA/NUS Diploma Course in Tissue Banking, it is also a useful guide for tissue bankers in establishing quality systems in their banks. Whether they be tissue banking students, tissue graft producers, radiation scientists, or transplantation surgeons, readers of this book will discover the latest developments in this exciting interdisciplinary field.
Download or read book Sterilization Validation and Routine Operation Handbook written by Anne Booth and published by CRC Press. This book was released on 2001-04-04 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The validation and radiation sterilization process for biomaterials and medical devices requires careful planning to ensure regulatory compliance followed by precise accuracy in execution and documentation. This in-depth guide details all steps from prevalidation planning to final report and ongoing monitoring and control. Sterilization Validation & Routine Operation Handbook: Radiation provides a framework for the validation and routine operation of an irradiation sterilization process. The guidance presented complies with ANSI/AAMI/ISO 11137: 1994, Sterilization of health care product-Requirements for validation and routine control-Radiation sterilization and the newly published AAMI substantiation of 25 kGy using VDmax procedure. The author discusses methods to aid in comprehending the requirements in these standards. She also provides practical procedures for the validation and routine monitoring and control of specific gamma and electron beam radiation sterilization processes. Background chapters provide needed information on radiation sterilization technologies, sterilization microbiology, validation approaches and working with a radiation sterilization contractor. Much of the information in this new book is presented in convenient tables and charts, with diagrams and other schematics that simply illustrate appropriate validation methodologies. Sterilization Validation & Routine Operation Handbook: Radiation brings together in one resource information scattered throughout many documents and will be useful to all those involved in the sterilization of medical materials, drugs and devices.
Download or read book Sterilisation of Biomaterials and Medical Devices written by Sophie Lerouge and published by Elsevier. This book was released on 2012-09-27 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective sterilisation of any material or device to be implanted in or used in close contact with the human body is essential for the elimination of harmful agents such as bacteria. Sterilisation of biomaterials and medical devices reviews established and commonly used technologies alongside new and emerging processes.Following an introduction to the key concepts and challenges involved in sterilisation, the sterilisation of biomaterials and medical devices using steam and dry heat, ionising radiation and ethylene oxide is reviewed. A range of non-traditional sterilisation techniques, such as hydrogen peroxide gas plasma, ozone and steam formaldehyde, is then discussed together with research in sterilisation and decontamination of surfaces by plasma discharges. Sterilisation techniques for polymers, drug-device products and tissue allografts are then reviewed, together with antimicrobial coatings for 'self-sterilisation' and the challenge presented by prions and endotoxins in the sterilisation of reusable medical devices. The book concludes with a discussion of future trends in the sterilisation of biomaterials and medical devices.With its distinguished editors and expert team of international contributors, Sterilisation of biomaterials and medical devices is an essential reference for all materials scientists, engineers and researchers within the medical devices industry. It also provides a thorough overview for academics and clinicians working in this area. - Reviews established and commonly used technologies alongside new and emerging processes - Introduces and reviews the key concepts and challenges involved in sterilisation - Discusses future trends in the sterilisation of biomaterials and medical devices
Download or read book Pharmaceutical Dosage Forms written by Sandeep Nema and published by CRC Press. This book was released on 2010-08-26 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical Dosage Forms: Parenteral Medications explores the administration of medications through other than the enteral route. First published in 1984 (as two volumes) and then last revised in 1993, this three-volume set presents the plethora of changes in the science and considerable advances in the technology associated with these products
Download or read book Pharmaceutical Dosage Forms Parenteral Medications written by Sandeep Nema and published by CRC Press. This book was released on 2016-04-19 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set of Pharmaceutical Dosage Forms: Parenteral Medications is an authoritative, comprehensive reference work on the formulation and manufacture of parenteral dosage forms, effectively balancing theoretical considerations with the practical aspects of their development. As such, it is recommended for scientists and engineers in the
Download or read book Bone Grafts And Bone Substitutes Basic Science And Clinical Applications written by Abdul Aziz Nather and published by World Scientific. This book was released on 2005-09-01 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest updates on the major challenges of bridging large bone defects, where options range from autografts, “tissue engineered bone”, biomaterials (hydroxyapatite, polycaprolactone and third generation biomaterials) to prostheses. Emphasis has been made on bone tissue engineering, the current state-of-the-art in this field, problems encountered with cell culture technology, scaffolds and bone growth factors (including genomics) and the use of gene therapy for the application of bone growth factors. Attention has also been given to the use of bone autografts. It also covers the use of biomaterials and prostheses as other options for reconstruction. Clinical applications, in addition to the basic science, are also included throughout the discussions.
Download or read book ISO Catalogue written by International Organization for Standardization and published by . This book was released on 2007 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AAMI Standards and Recommended Practices written by and published by . This book was released on 2000 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalogue written by International Organization for Standardization and published by . This book was released on 2008 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sterilization Manual for Health Centers written by Silvia I. Acosta-Gnass and published by Pan Amer Health Org. This book was released on 2010 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated sterilisation manual informs health workers about the simple protocols and procedures that have been developed to prevent hospital-acquired infections both inside and outside the sterilisation plant. The guidelines included in this manual show the steps to follow in cleaning, preparing, sterilizing, storing and transporting hospital equipment so as to obtain sterile material. It is very important to be aware of this information in order to provide patients with safe health care.
Download or read book Industrial Sterilization written by G. Briggs Phillips and published by Duke University Press. This book was released on 1973 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safe Management of Wastes from Health care Activities written by Yves Chartier and published by World Health Organization. This book was released on 2014 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of the WHO handbook on the safe, sustainable and affordable management of health-care waste--commonly known as "the Blue Book". The original Blue Book was a comprehensive publication used widely in health-care centers and government agencies to assist in the adoption of national guidance. It also provided support to committed medical directors and managers to make improvements and presented practical information on waste-management techniques for medical staff and waste workers. It has been more than ten years since the first edition of the Blue Book. During the intervening period, the requirements on generators of health-care wastes have evolved and new methods have become available. Consequently, WHO recognized that it was an appropriate time to update the original text. The purpose of the second edition is to expand and update the practical information in the original Blue Book. The new Blue Book is designed to continue to be a source of impartial health-care information and guidance on safe waste-management practices. The editors' intention has been to keep the best of the original publication and supplement it with the latest relevant information. The audience for the Blue Book has expanded. Initially, the publication was intended for those directly involved in the creation and handling of health-care wastes: medical staff, health-care facility directors, ancillary health workers, infection-control officers and waste workers. This is no longer the situation. A wider range of people and organizations now have an active interest in the safe management of health-care wastes: regulators, policy-makers, development organizations, voluntary groups, environmental bodies, environmental health practitioners, advisers, researchers and students. They should also find the new Blue Book of benefit to their activities. Chapters 2 and 3 explain the various types of waste produced from health-care facilities, their typical characteristics and the hazards these wastes pose to patients, staff and the general environment. Chapters 4 and 5 introduce the guiding regulatory principles for developing local or national approaches to tackling health-care waste management and transposing these into practical plans for regions and individual health-care facilities. Specific methods and technologies are described for waste minimization, segregation and treatment of health-care wastes in Chapters 6, 7 and 8. These chapters introduce the basic features of each technology and the operational and environmental characteristics required to be achieved, followed by information on the potential advantages and disadvantages of each system. To reflect concerns about the difficulties of handling health-care wastewaters, Chapter 9 is an expanded chapter with new guidance on the various sources of wastewater and wastewater treatment options for places not connected to central sewerage systems. Further chapters address issues on economics (Chapter 10), occupational safety (Chapter 11), hygiene and infection control (Chapter 12), and staff training and public awareness (Chapter 13). A wider range of information has been incorporated into this edition of the Blue Book, with the addition of two new chapters on health-care waste management in emergencies (Chapter 14) and an overview of the emerging issues of pandemics, drug-resistant pathogens, climate change and technology advances in medical techniques that will have to be accommodated by health-care waste systems in the future (Chapter 15).
