Download or read book Sterility Sterilisation and Sterility Assurance for Pharmaceuticals written by Tim Sandle and published by Elsevier. This book was released on 2013-10-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. - Covers the main sterilisation methods of physical removal, physical alteration and inactivation - Includes discussion of medical devices, aseptically filled products and terminally sterilised products - Describes bacterial, pyrogenic, and endotoxin risks to devices and products
Download or read book Assurance of Sterility for Sensitive Combination Products and Materials written by Byron Lambert and published by Academic Press. This book was released on 2019-06-15 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assurance of Sterility for Sensitive Combination Products and Materials: New Paradigms for the Next Generation of Medical Devices and Pharmaceuticals discusses the medical device industry and existing challenges regarding the exciting new world of sensitive combination products (SCPs) and their terminal sterilization. This book reassesses the current assumptions to assure the patient's best interests are met in the development of increasingly rigorous sterilization methods used to counteract MRSA and other 'super-bugs'. In addition, the book discusses the special challenges faced with implantable medical devices, sterilization requirements and further methods needed for material selection and the design process. This book is unique in taking a holistic, end-to-end approach to sterilization, with a particular focus on materials selection and product design. Introduces sterilization principles at the material selection and design stages Addresses the industry need for new sterilization processes for new medical devices and biomaterials Provides guidance to select the appropriate sterilization technique for newly developed sensitive combination products Examines forward thinking tactics for matching new developments in material compatibility with possible regulatory and QSR strategies
Download or read book Aseptic Pharmaceutical Manufacturing II written by Michael J. Groves and published by CRC Press. This book was released on 1995-05-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asceptic Pharmaceutical Manufacturing II explores the sophisticated technology, developments, and applications that allow aseptic processing to approach the sterility levels achieved with terminal sterilization. Written by experts in sterile manufacturing, this book covers aseptic technology, developments, and applications and makes a valuable contribution to understanding the issues involved in aseptic manufacture. Topics include the processing of biopharmaceuticals, lyophilization, personnel training, radiopharmaceuticals, hydrogen peroxide vapor sterilization, regulatory requirements, validation, and quality systems.
Download or read book Sterilization Validation and Routine Operation Handbook 2001 written by Anne F Booth and published by CRC Press. This book was released on 2017-11-22 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: The validation and radiation sterilization process for biomaterials and medical devices requires careful planning to ensure regulatory compliance followed by precise accuracy in execution and documentation. This in-depth guide details all steps from prevalidation planning to final report and ongoing monitoring and control. Sterilization Validation & Routine Operation Handbook: Radiation provides a framework for the validation and routine operation of an irradiation sterilization process. The guidance presented complies with ANSI/AAMI/ISO 11137: 1994, Sterilization of health care product-Requirements for validation and routine control-Radiation sterilization and the newly published AAMI substantiation of 25 kGy using VDmax procedure. The author discusses methods to aid in comprehending the requirements in these standards. She also provides practical procedures for the validation and routine monitoring and control of specific gamma and electron beam radiation sterilization processes. Background chapters provide needed information on radiation sterilization technologies, sterilization microbiology, validation approaches and working with a radiation sterilization contractor. Much of the information in this new book is presented in convenient tables and charts, with diagrams and other schematics that simply illustrate appropriate validation methodologies. Sterilization Validation & Routine Operation Handbook: Radiation brings together in one resource information scattered throughout many documents and will be useful to all those involved in the sterilization of medical materials, drugs and devices.
Download or read book Sterile Processing of Pharmaceutical Products written by Sam A. Hout and published by John Wiley & Sons. This book was released on 2022-01-26 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the methodologies and best practices of the sterile manufacture of drug products Thoroughly trained personnel and carefully designed, operated, and maintained facilities and equipment are vital for the sterile manufacture of medicinal products using aseptic processing. Professionals in pharmaceutical and biopharmaceutical manufacturing facilities must have a clear understanding of current good manufacturing practice (cGMP) and preapproval inspection (PAI) requirements. Sterile Processing of Pharmaceutical Products: Engineering Practice, Validation, and Compliance in Regulated Environments provides up-to-date coverage of aseptic processing techniques and sterilization methods. Written by a recognized expert with more than 20 years of industry experience in aseptic manufacturing, this practical resource illustrates a comprehensive approach to sterile manufacturing engineering that can achieve drug manufacturing objectives and goals. Topics include sanitary piping and equipment, cleaning and manufacturing process validation, computerized automated systems, personal protective equipment (PPE), clean-in-place (CIP) systems, barriers and isolators, and guidelines for statistical procedure. Offering authoritative guidance on the key aspects of sterile manufacturing engineering, this volume: Covers fundamentals of aseptic techniques, quality by design, risk assessment and management, and operational requirements Addresses various regulations and guidelines instituted by the FDA, ISPE, EMA, MHRA, and ICH Provides techniques for systematic process optimization and good manufacturing practice Emphasizes the importance of attention to detail in process development and validation Features real-world examples highlighting different aspects of drug manufacturing Sterile Processing of Pharmaceutical Products: Engineering Practice, Validation, and Compliance in Regulated Environments is an indispensable reference and guide for all chemists, chemical engineers, pharmaceutical professionals and engineers, and other professionals working in pharmaceutical sciences and manufacturing.
Download or read book Sterilization of Medical Devices written by Anne Booth and published by CRC Press. This book was released on 1998-11-30 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents vital information on international sterilization standards and guidance on practical application of these standards in the manufacturing process. It covers validation, industrial sterilization methods, emerging sterilization techniques, laboratory testing, manufacturing of sterile devices, and device reuse. Excerpted from The Validator, edited by Anne F. Booth, more than fifty experts share their knowledge of current technologies in easy-to-understand articles that establish methods to ensure compliance. Contents include reviews of ISO sterilization standards, industrial sterilization methods and technologies, and support testing methodologies.
Download or read book Sterile Product Development written by Parag Kolhe and published by Springer Science & Business Media. This book was released on 2013-10-12 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book encompasses various facets of sterile product development. Key concepts relevant to the successful development of sterile products are illustrated through case studies and are covered under three sections in this book: • Formulation approaches that discuss a variety of dosage forms including protein therapeutics, lipid-based controlled delivery systems, PEGylated biotherapeutics, nasal dosage form, and vaccines • Process, container closure and delivery considerations including freeze-thaw process challenges, best practices for technology transfer to enable commercial product development, innovations and advancement in aseptic fill-finish operations, approaches to manufacturing lyophilized parenteral products, pen / auto-injector delivery devices, and associated container closure integrity testing hurdles for sterile product closures • Regulatory and quality aspects in the areas of particulate matter and appearance evaluation, sterile filtration, admixture compatibility considerations, sterilization process considerations, microbial contamination investigations and validation of rapid microbiological methods, and dry and moist heat sterilizers This book is a useful resource to scientists and researchers in both industry and academia, and it gives process and product development engineers insight into current industry practices and evolving regulatory expectations for sterile product development.
Download or read book Sterilization Technology written by Robert F. Morrissey and published by Springer. This book was released on 1993-02-28 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes as many case studies as the contributors could identify, with the goal of answering questions that arise as a result of conducting day-to-day sterilization activities. Discussion of the theory of microbial inactivation and the philosophy of sterilization validation is followed by practical information on methods of interest to a broad audience. Chapters on special considerations for ethylene oxide, packaging of sterile products, contract sterilization, and regulations complete the coverage. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Sterilization of Drugs and Devices written by Fred M. Nordhauser and published by CRC Press. This book was released on 2018-03-29 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Editors Fred M. Nordhauser and Wayne P. Olson have gathered a team of 18 experts from multi-national and leading edge companies to explore the advantages and disadvantages of current sterilization technologies. They cover the theory behind the technology, the practical concerns of installation from engineering and product development perspectives, the "how to validate" concern, and the pragmatics of implementation in a manner that will satisfy the regulatory agencies. The broad range of in-depth information on numerous technologies will help readers design sterile manufacturing processes cost effectively and efficiently.
Download or read book Handbook of Validation in Pharmaceutical Processes written by James P. Agalloco and published by . This book was released on 2022 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Revised to reflect significant advances in pharmaceutical production and regulatory expectations, Handbook of Validation in Pharmaceutical Processes, Fourth Edition examines and blueprints every step of the validation process needed to remain compliant and competitive. This book blends the use of theoretical knowledge with recent technological advancements to achieve applied practical solutions. As the industry's leading source for validation of sterile pharmaceutical processes for more than 10 years, this greatly expanded work is a comprehensive analysis of all the fundamental elements of pharmaceutical and bio-pharmaceutical production processes. Handbook of Validation in Pharmaceutical Processes, Fourth Edition is essential for all global health care manufacturers and pharmaceutical industry professionals"--
Download or read book Advanced Aseptic Processing Technology written by James Agalloco and published by CRC Press. This book was released on 2010-07-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The preparation of sterile products using aseptic processing is considered perhaps the most critical process in the pharmaceutical industry and has witnessed continual improvement over the last half century. New approaches that have transformed classical aseptic production methods are appearing almost daily. This book reviews emerging technologies for aseptic processing that will markedly reduce the level of contamination risk for sterile products and includes coverage on: The use of isolator and barrier concepts for aseptic processing and assembly. The application of robotics as an alternative to gowned personnel. The increasing reliance on automation to minimize or eliminate operator intervention. The design, operational, monitoring and compliance changes necessary for success with advanced aseptic processing. Advanced Aseptic Processing Technology is an essential reference for anyone working with sterile products, and is recommended for individuals in manufacturing,, compliance, regulatory affairs, microbiology, environmental monitoring, sterility testing, sterilization, validation, engineering, development, facility and equipment design, component and equipment suppliers, automation, and robotics.
Download or read book Pharmaceutical Microbiological Quality Assurance and Control written by David Roesti and published by John Wiley & Sons. This book was released on 2020-01-02 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Relying on practical examples from the authors’ experience, this book provides a thorough and modern approach to controlling and monitoring microbial contaminations during the manufacturing of non-sterile pharmaceuticals. Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks
Download or read book Achieving Sterility in Medical and Pharmaceutical Products written by Nigel Halls and published by CRC Press. This book was released on 1994-05-10 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailing the scientific principles underlying the achievement of sterility, this unique reference examines both a broad spectrum of practical, commonly used sterilization procedures and the methods available to confirm sterility-assessing the strengths and limitations of each technology. Delineates current regulatory requirements for sterility-emphasizing the importance of aseptic processes in the medical establishment and the pharmaceutical industry! Achieving Sterility in Medical and Pharmaceutical Products discusses sterilization approaches that utilize saturated steam dry heat ethylene oxide gamma radiation sterile filtration and more!
Download or read book Steam Sterilization and Sterility Assurance Using Table top Sterilizers in Office based Ambulatory care Medical Surgical and Dental Facilities written by Association for the Advancement of Medical Instrumentation and published by . This book was released on 1998 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Validation in Pharmaceutical Processes Fourth Edition written by James Agalloco and published by CRC Press. This book was released on 2021-10-28 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised to reflect significant advances in pharmaceutical production and regulatory expectations, Handbook of Validation in Pharmaceutical Processes, Fourth Edition examines and blueprints every step of the validation process needed to remain compliant and competitive. This book blends the use of theoretical knowledge with recent technological advancements to achieve applied practical solutions. As the industry's leading source for validation of sterile pharmaceutical processes for more than 10 years, this greatly expanded work is a comprehensive analysis of all the fundamental elements of pharmaceutical and bio-pharmaceutical production processes. Handbook of Validation in Pharmaceutical Processes, Fourth Edition is essential for all global health care manufacturers and pharmaceutical industry professionals. Key Features: Provides an in-depth discussion of recent advances in sterilization Identifies obstacles that may be encountered at any stage of the validation program, and suggests the newest and most advanced solutions Explores distinctive and specific process steps, and identifies critical process control points to reach acceptable results New chapters include disposable systems, combination products, nano-technology, rapid microbial methods, contamination control in non-sterile products, liquid chemical sterilization, and medical device manufacture
Download or read book Microbiology and Sterility Assurance in Pharmaceuticals and Medical Devices written by and published by . This book was released on 2011 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sterilization of Health Care Products written by American National Standards Institute and published by . This book was released on 2011 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
