Download or read book Sterility Sterilisation and Sterility Assurance for Pharmaceuticals Technology Validation and Current Regulations written by Tim Sandle and published by Woodhead Publishing. This book was released on 2017-11-13 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. Covers the main sterilisation methods of physical removal, physical alteration and inactivationIncludes discussion of medical devices, aseptically filled products and terminally sterilised productsDescribes bacterial, pyrogenic, and endotoxin risks to devices and products
Download or read book Sterility Sterilisation and Sterility Assurance for Pharmaceuticals written by Tim Sandle and published by Elsevier. This book was released on 2013-10-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. - Covers the main sterilisation methods of physical removal, physical alteration and inactivation - Includes discussion of medical devices, aseptically filled products and terminally sterilised products - Describes bacterial, pyrogenic, and endotoxin risks to devices and products
Download or read book Assurance of Sterility for Sensitive Combination Products and Materials written by Byron Lambert and published by Academic Press. This book was released on 2019-06-15 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assurance of Sterility for Sensitive Combination Products and Materials: New Paradigms for the Next Generation of Medical Devices and Pharmaceuticals discusses the medical device industry and existing challenges regarding the exciting new world of sensitive combination products (SCPs) and their terminal sterilization. This book reassesses the current assumptions to assure the patient's best interests are met in the development of increasingly rigorous sterilization methods used to counteract MRSA and other 'super-bugs'. In addition, the book discusses the special challenges faced with implantable medical devices, sterilization requirements and further methods needed for material selection and the design process. This book is unique in taking a holistic, end-to-end approach to sterilization, with a particular focus on materials selection and product design. Introduces sterilization principles at the material selection and design stages Addresses the industry need for new sterilization processes for new medical devices and biomaterials Provides guidance to select the appropriate sterilization technique for newly developed sensitive combination products Examines forward thinking tactics for matching new developments in material compatibility with possible regulatory and QSR strategies
Download or read book Microbiology and Sterility Assurance in Pharmaceuticals and Medical Devices written by and published by . This book was released on 2011 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aseptic Pharmaceutical Manufacturing II written by Michael J. Groves and published by CRC Press. This book was released on 1995-05-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asceptic Pharmaceutical Manufacturing II explores the sophisticated technology, developments, and applications that allow aseptic processing to approach the sterility levels achieved with terminal sterilization. Written by experts in sterile manufacturing, this book covers aseptic technology, developments, and applications and makes a valuable contribution to understanding the issues involved in aseptic manufacture. Topics include the processing of biopharmaceuticals, lyophilization, personnel training, radiopharmaceuticals, hydrogen peroxide vapor sterilization, regulatory requirements, validation, and quality systems.
Download or read book Sterilisation and Disinfection written by T. D. Whittet and published by Elsevier. This book was released on 2013-10-22 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical Monographs, Volume 3: Sterilisation and Disinfection provides a strong foundation for the proper use of disinfectants in practice. This monograph surveys the types of preparations required to be produced in a sterile condition and explains in detail the methods available for sterilization. This monograph is comprised of four parts. Part 1 discusses the purposes of sterilizing pharmaceutical preparations to prevent the infection of body tissues, fluids, or cavities with organisms that may produce damage or disease. Part 2 provides information concerning the extent of contamination of pharmaceutical materials, which is obtained by means of sterility tests. Part 3 focuses on autoclave design and an explanation is offered of the background against which sterilizers have been developed and the method in which their major components operate. Part 4 describes the various types of disinfectants, including halogens, phenols, alcohols, aldehydes, dyes, furan derivatives, amidines, surface-active compounds, and derivatives of quinolone and isoquinoline. This monograph is a valuable resource for undergraduate students of pharmacy and allied subjects.
Download or read book Good Hospital Practice written by and published by . This book was released on 1988 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pharmaceutical Microbiological Quality Assurance and Control written by David Roesti and published by John Wiley & Sons. This book was released on 2020-01-02 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Relying on practical examples from the authors’ experience, this book provides a thorough and modern approach to controlling and monitoring microbial contaminations during the manufacturing of non-sterile pharmaceuticals. Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks
Download or read book Sterile Processing of Pharmaceutical Products written by Sam A. Hout and published by John Wiley & Sons. This book was released on 2021-12-31 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the methodologies and best practices of the sterile manufacture of drug products Thoroughly trained personnel and carefully designed, operated, and maintained facilities and equipment are vital for the sterile manufacture of medicinal products using aseptic processing. Professionals in pharmaceutical and biopharmaceutical manufacturing facilities must have a clear understanding of current good manufacturing practice (cGMP) and preapproval inspection (PAI) requirements. Sterile Processing of Pharmaceutical Products: Engineering Practice, Validation, and Compliance in Regulated Environments provides up-to-date coverage of aseptic processing techniques and sterilization methods. Written by a recognized expert with more than 20 years of industry experience in aseptic manufacturing, this practical resource illustrates a comprehensive approach to sterile manufacturing engineering that can achieve drug manufacturing objectives and goals. Topics include sanitary piping and equipment, cleaning and manufacturing process validation, computerized automated systems, personal protective equipment (PPE), clean-in-place (CIP) systems, barriers and isolators, and guidelines for statistical procedure. Offering authoritative guidance on the key aspects of sterile manufacturing engineering, this volume: Covers fundamentals of aseptic techniques, quality by design, risk assessment and management, and operational requirements Addresses various regulations and guidelines instituted by the FDA, ISPE, EMA, MHRA, and ICH Provides techniques for systematic process optimization and good manufacturing practice Emphasizes the importance of attention to detail in process development and validation Features real-world examples highlighting different aspects of drug manufacturing Sterile Processing of Pharmaceutical Products: Engineering Practice, Validation, and Compliance in Regulated Environments is an indispensable reference and guide for all chemists, chemical engineers, pharmaceutical professionals and engineers, and other professionals working in pharmaceutical sciences and manufacturing.
Download or read book Sterile Product Development written by Parag Kolhe and published by Springer Science & Business Media. This book was released on 2013-10-12 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book encompasses various facets of sterile product development. Key concepts relevant to the successful development of sterile products are illustrated through case studies and are covered under three sections in this book: • Formulation approaches that discuss a variety of dosage forms including protein therapeutics, lipid-based controlled delivery systems, PEGylated biotherapeutics, nasal dosage form, and vaccines • Process, container closure and delivery considerations including freeze-thaw process challenges, best practices for technology transfer to enable commercial product development, innovations and advancement in aseptic fill-finish operations, approaches to manufacturing lyophilized parenteral products, pen / auto-injector delivery devices, and associated container closure integrity testing hurdles for sterile product closures • Regulatory and quality aspects in the areas of particulate matter and appearance evaluation, sterile filtration, admixture compatibility considerations, sterilization process considerations, microbial contamination investigations and validation of rapid microbiological methods, and dry and moist heat sterilizers This book is a useful resource to scientists and researchers in both industry and academia, and it gives process and product development engineers insight into current industry practices and evolving regulatory expectations for sterile product development.
Download or read book Sterile Pharmaceutical Products written by Kenneth E. Avis and published by CRC Press. This book was released on 1995-10-31 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sterile Pharmaceutical Products: Process Engineering Applications addresses the key concepts and applications of the sterile pharmaceutical manufacturing industry. It covers elements of the design, installation, validation, and usage of critical processes associated with sterile product manufacture. From water systems to clean-in-place systems, to sterile powder handling and robotic applications in sterile production environments, this book addresses the issues of system implementation, integration, and operations. Written by recognized experts and peer reviewed for accuracy, all chapters include references to supplemental resources and numerous illustrations.
Download or read book Steam Sterilization and Sterility Assurance Using Table top Sterilizers in Office based Ambulatory care Medical Surgical and Dental Facilities written by Association for the Advancement of Medical Instrumentation and published by . This book was released on 1998 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sterilization of Drugs and Devices written by Fred M. Nordhauser and published by Routledge. This book was released on 2018-03-29 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Editors Fred M. Nordhauser and Wayne P. Olson have gathered a team of 18 experts from multi-national and leading edge companies to explore the advantages and disadvantages of current sterilization technologies. They cover the theory behind the technology, the practical concerns of installation from engineering and product development perspectives, the "how to validate" concern, and the pragmatics of implementation in a manner that will satisfy the regulatory agencies. The broad range of in-depth information on numerous technologies will help readers design sterile manufacturing processes cost effectively and efficiently.
Download or read book Steam Sterilization and Sterility Assurance in Health Care Facilities written by Association for the Advancement of Medical Instrumentation and published by Association for the Advancement of Medical Instrumentation (AAMI). This book was released on 2002 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prevention and Control of Infections in Hospitals written by Bjørg Marit Andersen and published by Springer. This book was released on 2019-02-25 with total page 1127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers extensive information on preventive and infection surveillance procedures, routines and policies adapted to the optimal infection control level needed to tackle today’s microbes in hospital practice. It especially focuses on preventive measures for serious hospital infections. Each chapter includes a practical section that addresses the main aspects of procedures and treatment, and a theoretical section that contains updated documentation that can be used for further study, or to help select infection control measures. Infection control concerns all healthcare professional working directly or indirectly with patients; in diagnosis, treatment, isolation measures, operations, equipment, drugs, cleaning, textiles, transport, porter service, food and water, building and maintenance, etc. Hygiene and environmental control is central to infection prevention for patients, visitors and staff alike. Good hygienic practices, individual infection control, well implemented and frequent environmental cleaning, and a high professional standard of hygiene in the treatment and care of patients, are essential to patient safety and a safe working environment. Addressing this essential topic, this book is intended for doctors, nurses and other healthcare workers, students in health-related subjects, hospital managers and health bureaucrats, as well as patients and their families.
Download or read book Advanced Aseptic Processing Technology written by James Agalloco and published by CRC Press. This book was released on 2016-04-19 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: The preparation of sterile products using aseptic processing is considered perhaps the most critical process in the pharmaceutical industry and has witnessed continual improvement over the last half century. New approaches that have transformed classical aseptic production methods are appearing almost daily. This book reviews emerging technologies
Download or read book Chemical Engineering in the Pharmaceutical Industry written by Mary T. am Ende and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 1435 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the important chemical engineering concepts for the development of new drugs, revised second edition The revised and updated second edition of Chemical Engineering in the Pharmaceutical Industry offers a guide to the experimental and computational methods related to drug product design and development. The second edition has been greatly expanded and covers a range of topics related to formulation design and process development of drug products. The authors review basic analytics for quantitation of drug product quality attributes, such as potency, purity, content uniformity, and dissolution, that are addressed with consideration of the applied statistics, process analytical technology, and process control. The 2nd Edition is divided into two separate books: 1) Active Pharmaceutical Ingredients (API’s) and 2) Drug Product Design, Development and Modeling. The contributors explore technology transfer and scale-up of batch processes that are exemplified experimentally and computationally. Written for engineers working in the field, the book examines in-silico process modeling tools that streamline experimental screening approaches. In addition, the authors discuss the emerging field of continuous drug product manufacturing. This revised second edition: Contains 21 new or revised chapters, including chapters on quality by design, computational approaches for drug product modeling, process design with PAT and process control, engineering challenges and solutions Covers chemistry and engineering activities related to dosage form design, and process development, and scale-up Offers analytical methods and applied statistics that highlight drug product quality attributes as design features Presents updated and new example calculations and associated solutions Includes contributions from leading experts in the field Written for pharmaceutical engineers, chemical engineers, undergraduate and graduation students, and professionals in the field of pharmaceutical sciences and manufacturing, Chemical Engineering in the Pharmaceutical Industry, Second Edition contains information designed to be of use from the engineer's perspective and spans information from solid to semi-solid to lyophilized drug products.
