Download or read book Stereolithography written by Paulo Jorge Bártolo and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stereolithography: Materials, Processes and Applications will focus on recent advances in stereolithography covering aspects related to the most recent advances in the field, in terms of fabrication processes (two-photon polymerization, micro-stereolithography, infrared stereolithography and stereo-thermal-lithography), materials (novel resins, hydrogels for medical applications and highly reinforced resins with ceramics and metals), computer simulation and applications.
Download or read book Rapid Prototyping Manufacturing written by Paul Francis Jacobs and published by Society of Manufacturing Engineers. This book was released on 1992 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This turnkey technology source provides an introduction to rapid prototyping and manufacturing (RP&M) with emphasis on Stereolithography which represents the majority of all rapid prototyping systems currently in place. The content is based on theory, analysis and experiment with extensive test data, including select case studies from the automotive, simultaneous engineering, and medical sectors.
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
Download or read book Stereolithography in Treatment Planning for Craniomaxillary Surgery written by Brett A. Miles and published by . This book was released on 2005 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing Second Edition written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2019-10-16 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing is growing dynamically as the interest is persisting from manufacturing sector, including other sectors as well. Conceptually, additive manufacturing is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Second edition of Additive Manufacturing highlights the latest advancements in the field, taking an application oriented approach. It includes new material on traditional polymer based rapid prototyping technologies, additive manufacturing of metals and alloys including related design issues. Each chapter comes with suggested reading, questions for instructors and PowerPoint slides.
Download or read book Additive and Subtractive Manufacturing written by J. Paulo Davim and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-01-20 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) and subtractive manufacturing (SM) offer numerous advantages in the production of single and multiple components. They provide incomparable design independence and are used to fabricate products in several industries, e.g.: aeronautic, automotive, biomedical, etc. The book presents recent results of processes including 3D printing, SLS (selective laser sintering), EBM (electron beam melting) and Precise Cutting and Drilling.
Download or read book BioNanoFluidic MEMS written by Peter J. Hesketh and published by Springer Science & Business Media. This book was released on 2007-11-15 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains biosensor development fundamentals. It also initiates awareness in engineers and scientists who would like to develop and implement novel biosensors for agriculture, biomedicine, homeland security, environmental needs, and disease identification. In addition, the book introduces and lays the basic foundation for design, fabrication, testing, and implementation of next generation biosensors through hands-on learning.
Download or read book Computer Integrated Manufacturing Iccim 91 Manufacturing Enterprises Of The 21st Century Proceedings Of The International Conference written by B S Lim and published by World Scientific. This book was released on 1991-10-02 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 21st century, computer integrated manufacturing (CIM) systems will not only be the economic development tools but will also be the essential means of achieving a higher level of flexibility, cohesiveness and performance. CIM systems are beginning to settle into our society and industries, with greater emphasis on the integration of economic, cultural and social aspects together with design, planning, factory automation and artificial intelligent systems.This volume of proceedings brings together 10 keynote and invited speaker addresses, and over 180 papers by practitioners from 28 countries. It documents current research and in-depth studies on the fundamental aspects of advanced CIM systems and their practical applications. The papers fall into 3 main sections: CIM Related Issues; Industrial AI Applications Aspects; and Concurrent Engineering, Advanced Design, Simulation and Flexible Manufacturing Systems.
Download or read book Characterization and Control of Interfaces for High Quality Advanced Materials II written by Kevin Ewsuk and published by John Wiley & Sons. This book was released on 2007-07-02 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes papers from the Second International Conference on Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI2006) in Kurashiki, Japan, 2006. Interfaces are critically important to a broad spectrum of materials and technologies. This Proceedings of ICCCI 2006 features 71 peer-reviewed papers on interface characterization and control technology for materials synthesis, powder processing, composite processing, joining, and to control airborne particulates.
Download or read book 3D Printing in Medicine written by Deepak M. Kalaskar and published by Woodhead Publishing. This book was released on 2022-10-18 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine, Second Edition examines the rapidly growing market of 3D-printed biomaterials and their clinical applications. With a particular focus on both commercial and premarket tools, the book looks at their applications within medicine and the future outlook for the field. The chapters are written by field experts actively engaged in educational and research activities at the top universities in the world. The earlier chapters cover the fundamentals of 3D printing, including topics such as materials and hardware. The later chapters go on to cover innovative applications within medicine such as computational analysis of 3D printed constructs, personalized 3D printing - including 3D cell and organ printing and the role of AI - with a subsequent look at the applications of high-resolution printing, 3D printing in diagnostics, drug development, 4D printing, and much more. This updated new edition features completely revised content, with additional new chapters covering organs-on-chips, bioprinting regulations and standards, intellectual properties, and socio-ethical implications of organs-on-demand. Reviews a broad range of biomedical applications of 3D printing biomaterials and technologies Provides an interdisciplinary look at 3D printing in medicine, bridging the gap between engineering and clinical fields Includes completely updated content with additional new chapters, covering topics such as organs-on-chips, bioprinting regulations, intellectual properties, medical standards in 3D printing, and more
Download or read book Handbook of Advanced Ceramics written by T. Chartier and published by Elsevier Inc. Chapters. This book was released on 2013-04-11 with total page 1258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo
Download or read book Springer Handbook of Additive Manufacturing written by Eujin Pei and published by Springer Nature. This book was released on 2023-11-25 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is the ultimate definitive guide that covers key fundamentals and advanced applications for Additive Manufacturing. The Handbook has been structured into seven sections, comprising of a thorough Introduction to Additive Manufacturing; Design and Data; Processes; Materials; Post-processing, Testing and Inspection; Education and Training; and Applications and Case Study Examples. The general principles and functional relationships are described in each chapter and supplemented with industry use cases. The aim of this book is to help designers, engineers and manufacturers understand the state-of-the-art developments in the field of Additive Manufacturing. Although this book is primarily aimed at students and educators, it will appeal to researchers and industrial professionals working with technology users, machine or component manufacturers to help them make better decisions in the implementation of Additive Manufacturing and its applications.
Download or read book Stereolithography and Other RP M Technologies written by Paul Francis Jacobs and published by American Society of Mechanical Engineers. This book was released on 1996 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by personnel from North American suppliers of commercially available RPandM systems, the volume updates the state of the technology, and emphasizes the user advantages in terms of cost, market speed, and quality. Topics include: advances in stereolithography photopolymer systems; stereolithography hardware and software technology; parts accuracy; QuickCast development, foundry experience and application; RPandM applications at Sandia National Laboratories; the soft tooling, hard tooling, and special applications of RPandM; and laminated object manufacturing. Includes a chapter on service bureaus and also a directory. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Industrial Applications of Lasers written by John F. Ready and published by Elsevier. This book was released on 1997-04-25 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical book with a variety of uses, this book can help applications engineers spark problem-solving techniques through the use of lasers. Industrial Application of Lasers, Second Edition takes the reader through laser fundamentals, unusual properties of laser light, types of practical lasers available, and commonly used accessory equipment. The book also applies this information to existing and developing applications. Current uses of lasers, including laser welding and cutting, electronic fabrication techniques, lightwave communications, laser-based applications in alignment, surveying, and metrology are all covered as well as discussing the potential for future applications such as all-optical computers,remote environmental monitoring, and laser-assisted thermonuclear fusion. Explains basic laser fundamentals as well as emphasizing how lasers are used for real applications in industry Describes the importance of laser safety Discusses potentially important future applications such as remote environmental monitoring Includes rare expert lore and opinion
Download or read book Artificial Chemical Sensing written by Joseph R. Stetter and published by The Electrochemical Society. This book was released on 2001 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Artificial Intelligence in Additive Manufacturing written by Salunkhe, Sachin and published by IGI Global. This book was released on 2021-12-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: After the recent launch of home-based personal 3D printers as well as government funding and company investments in advancing manufacturing initiatives, additive manufacturing has rapidly come to the forefront of discussion and become a more approachable lucrative career of particular interest to the younger generation. It is essential to identify the long-term competitive advantages and how to teach, inspire, and create a resolute community of supporters, learners, and new leaders in this important industry progression. Applications of Artificial Intelligence in Additive Manufacturing provides instruction on how to use artificial intelligence to produce additively manufactured parts. It discusses an overview of the field, the strategic blending of artificial intelligence and additive manufacturing, and features case studies on the various emerging technologies. Covering topics such as artificial intelligence models, experimental investigations, and online detections, this book is an essential resource for engineers, manufacturing professionals, computer scientists, AI scientists, researchers, educators, academicians, and students.
