Download or read book THERMEC 2021 written by Mihail Ionescu and published by Trans Tech Publications Ltd. This book was released on 2021-01-05 with total page 1937 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications Selected, peer-reviewed papers from the International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC 2021), May 10-14, 2021, Vienna, Austria

Download or read book The Metallurgy of Zinc Coated Steels written by Arnold Marder and published by Elsevier. This book was released on 2023-02-22 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Metallurgy of Zinc Coated Steels provides a comprehensive overview of the science and engineering of zinc coatings. Beginning with a look at new innovations made in the hot-dip coating methods (CGL), the book goes on to discuss phase equilibria, Zn bath phenomena and overlay coating formations. Both processing methods and controls are covered, as well as corrosion resistance and coating product properties. The book concludes with a discussion of future opportunities for zinc coatings. This book is a vital resource for both individuals new to this area while also serving as a handbook for users and producers of zinc coatings. Presents a basic understanding of the science and engineering behind zinc coatings with a thorough and cutting-edge look at their processing methods, controls, properties, and applications Discusses corrosion resistance, overlay coating formation, heat treatment, interface reactions, deposition processes, and more Covers real-world applications of these coatings

Download or read book Steels written by H.K.D.H. Bhadeshia and published by Elsevier. This book was released on 2024-01-22 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels: Microstructure and Properties is an essential text and reference, providing indispensable foundational content for researchers, metallurgists, and engineers in industry and academia. The book provides inspiring content for undergraduates, yet has a depth that makes it useful to researchers. Steels represent the most used metallic materials, possessing a wide range of structures and properties. By examining the properties of steels in conjunction with structure, the book provides a valuable description of the development and behavior of these materials- the very foundation of their widespread use. The new edition has been thoroughly updated with 2 new chapters, expanded content throughout, and numerical Q+As at the end of each chapter, yet it retains its clear writing style, extensive bibliographies, and real-life examples. Revised edition features a new chapter on selection of steels, a new chapter on sustainable use of steels, expanded coverage of surface treatment of steels, crystallographic textures, metallurgical aspects of additive manufacturing of steels, and much more Includes derivations with important equations so that students from a broad range of subjects can appreciate the issues without being bogged down in mathematics Presents micrographs and figures that reflect the resolution and capabilities of modern instruments

Download or read book Public Key Cryptography PKC 2021 written by Juan A. Garay and published by Springer Nature. This book was released on 2021-04-30 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume proceedings set LNCS 12710 and 12711 constitutes the proceedings of the 24th IACR International Conference on Practice and Theory of Public Key Cryptography, PKC 2021, which was held online during May 10-13, 2021. The conference was originally planned to take place in Edinburgh, UK, but had to change to an online format due to the COVID-19 pandemic. The 52 papers included in these proceedings were carefully reviewed and selected from 156 submissions. They focus on all aspects of public-key cryptography, covering theory, implementations and applications. This year, post-quantum cryptography, PQC constructions and cryptanalysis received special attention.

Download or read book Seismic Performance Assessment of Buildings Implementation guide written by and published by . This book was released on 2018 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Sensing Materials and Intelligent Algorithms for Multi Domain Structural Health Monitoring written by Liang Ren and published by Frontiers Media SA. This book was released on 2022-01-07 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 55 Company Book IRON AND STEEL written by Serhat Ertan and published by ERP Destekli Bütçe Danışmanlığı A.Ş.. This book was released on 2021-05-14 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the largest referral for Turkish companies.

Download or read book Concrete Filled Double Skin Steel Tubular Columns written by Mostafa Fahmi Hassanein and published by Elsevier. This book was released on 2023-02-16 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete-Filled Double-Skin Steel Tubular Columns: Behavior and Design provides a thorough review of the recent advances on the behaviour and design of concrete-filled double-skin steel tubular (CFDST) columns. Drawing on their extensive knowledge and research, the authors cover topics such as different CFDST columns under axial compression, innovative techniques including the use of rubberised concrete, columns with different cross-sections, and steel material envelops and failure modes. This book is an overview of research carried out by this highly experienced and leading research group with specialist knowledge in the topic. It is an invaluable resource for researchers, graduates and post-graduate civil engineers and civil engineering designers. Provides a comprehensive overview of advances on the behaviour and design of concrete-filled double-skin steel tubular (CFDST) columns over the past decade Gives deep-dive explanation of important concepts such as the void ratio which makes these girders different from conventional concrete-filled steel tubular (CFST) columns Explains the failure modes of short and slender columns under compression, with detailed illustrations and photos from both real-life and virtual tests performed by the authors Presents in-depth analysis of the ultimate strengths of CFDST columns with different steel envelops and concrete infills Makes a detailed comparison with available international codes, such as Eurocode 3, and provides recommendations for future studies Discusses new innovative confining stress-based design for different types of CFDST short columns

Download or read book Metal Forming Processes written by Kakandikar Ganesh Marotrao and published by CRC Press. This book was released on 2022-08-25 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal forming processes include bulk forming and sheet metal forming with numerous applications. This book covers some of the latest developments aspects of these processes such as numerical simulations to achieve optimum combinations and to get insight into process capability. Implementation of new technologies to improve performance based on Computer Numerical Control (CNC) technologies are also discussed, including the use of CAD/CAM/CAE techniques to enhance precision in manufacturing. Applications of AI/ML, the Internet of Things (IoT), and the role of tribological aspects in green engineering are included to suit Industry 4.0. Features: Covers latest developments in various sheet metal forming processes Discusses improvements in numerical simulation with various material models Proposes improvements by optimum combination of process parameters Includes finite element simulation of processes and formability Presents a review on techniques to produce ultra-fine-grained materials This book is aimed at graduate students, engineers, and researchers in sheet metal forming, materials processing and their applications, finite element analysis, manufacturing, and production engineering.

Download or read book Advances in Design Simulation and Manufacturing IV written by Vitalii Ivanov and published by Springer Nature. This book was released on 2021-05-28 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on topics at the interface between mechanical and chemical engineering, emphasizing design, simulation, and manufacturing. Specifically, it covers recent developments in the mechanics of solids and structures, numerical simulation of coupled problems, including fatigue, fluid behavior, particle movement, pressure distribution. Further, it reports on developments in chemical process technology, heat and mass transfer, energy-efficient technologies, and industrial ecology. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this second volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.

Download or read book International Handbook of Structural Fire Engineering written by Kevin LaMalva and published by Springer Nature. This book was released on 2021-10-12 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is focused on structural resilience in the event of fire. It serves as a single point of reference for practicing structural and fire protection engineers on the topic of structural fire safety. It is also stands as a key point of reference for university students engaged with structural fire engineering.

Download or read book Hydrogen Assisted Direct Reduction of Iron Oxides written by Pasquale Cavaliere and published by Springer Nature. This book was released on 2022-04-21 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the main approaches to produce and synthesize iron and steel through hydrogen-based technologies. Depending on the processing route and on the energy demand, the best available techniques and the most forward-looking solutions are explained. The book is edited with the contribution representing a range of industries in order to evaluate the industrial feasibility of each selected technology. It presents the most efficient solutions applied by ironmaking and steelmaking factories all around the world.

Download or read book Principles of Engineering Tribology written by Ahmed Abdelbary and published by Elsevier. This book was released on 2023-05-26 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Engineering Tribology: Fundamentals and Applications introduces readers to the core theories and fundamentals of the field, its basic terminology and concepts, as well as advanced topics such as the tribological properties of various engineering surfaces, roughness measurements, and the mechanics of surface contact. The fundamentals of friction and wear of metallic and non-metallic materials such as polymers, ceramics, rubbers, and composites are discussed, as are fluidic, gaseous, grease, and solid media lubrication techniques. In addition, the properties of lubricants and various types of additives incorporated are discussed, along with a methodology for conducting friction, wear and lubrication laboratory testing and an overview of simulation and modeling methods for various tribosystems. Case studies and applications are featured throughout, with a particular emphasis on analyzing failure modes of tribosystems. Introduces the basic concepts of tribology, building a comprehensive understanding for readers and then covering more advanced topics Discusses tribological properties of various engineering surfaces, roughness measurements, and mechanics of surface contact Covers more advanced topics such as fluidic, gaseous, grease, and solid media lubricants, methods for conducing friction and wear laboratory tests, and more Includes a wide-range of both traditional and state-of-the-art applications and case studies

Download or read book Phytochemistry in Corrosion Science written by Chandrabhan Verma and published by CRC Press. This book was released on 2024-03-27 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phytochemistry in Corrosion Science covers the use of plant extracts/phytochemicals in corrosion mitigation with industrial applications. It explores innovative and characterization approaches toward the utilization of plant extracts and their phytochemicals as potential corrosion inhibitors for several metals and their alloys. Providing a comprehensive overview of the green aspects of plant extracts as corrosion inhibitors, this book discusses the preparation of aqueous and organic phase extracts, and their advantages, disadvantages, and use for different aggressive media. It also examines aqueous and organic extracts that have been successfully used as corrosion inhibitors for various metals and electrolyte combinations. This book will be a useful reference for undergraduate and graduate students and academic researchers in the fields of phytochemistry, corrosion science and engineering, environmental science, chemical engineering, green chemistry, and mechanical/industrial engineering.

Download or read book Self Help To Simplified Chemistry 10 written by Amar Bhutani and published by Ravinder Singh and sons. This book was released on with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on Allied Publishers(Viraf J. Dalal) and is for 2021 examinations. It is well written by S.K. Sharma & Sister Dallins.

Download or read book Networked Control Systems for Connected and Automated Vehicles written by Alexander Guda and published by Springer Nature. This book was released on 2022-11-15 with total page 1646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of the latest research findings in such areas as networked multi-agent systems, co-design of communication and control, distributed control strategies that can cope with asynchrony between local loops, event-triggered control, modelling of network infrastructure, novel concepts of distributed control for networked and cyber-physical systems. The book contains the result of the latest research in the field of communication and control system design to support networked control systems with stringent real-time requirements. It introduces readers to research in the field of joint design of the control and communication protocol and presents the latest developments in the area of novel optimal control and scheduling designs under resource constraints. The book also covers the issues of creating emerging information and communication technologies for traffic estimation and control, connected and autonomous technology applications and modelling for commercial and shared vehicle operations. The reader will find information on emerging cyber-physical systems, networked multi-agent systems, large-scale distributed energy systems, as well as on real-time systems, safety and security systems. A significant block of studies is devoted to the topic of transitions towards electrification and automation of vehicles. Modern concepts of road infrastructure construction are described in detail in the presented research papers. Automotive industry professionals will be particularly interested in the sections on the novel mechanisms for medium access in multi-hop wireless networks with real-time requirements, optimal layering architecture and co-design for wireless communication. The book will be incredibly interesting for researchers interested in human–digital interfaces, industrial Internet of Things, artificial intelligence and machine learning.

Download or read book 32nd European Symposium on Computer Aided Process Engineering written by Ludovic Montastruc and published by Elsevier. This book was released on 2022-06-30 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: 32nd European Symposium on Computer Aided Process Engineering: ESCAPE-32 contains the papers presented at the 32nd European Symposium of Computer Aided Process Engineering (ESCAPE) event held in Toulouse, France. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students and consultants for chemical industries who work in process development and design. Presents findings and discussions from the 32nd European Symposium of Computer Aided Process Engineering (ESCAPE) event