Download or read book Steel Fiber Reinforced Concrete Under Concentrated Load written by Fanbing Song and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Fiber Reinforced Concrete Under Concentrated Load written by Fanbing Song and published by Beuth Verlag GmbH. This book was released on 2019-07-12 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The situation of high compressive load transmitted onto limited area of concrete member occurs frequently in a variety of industrial and engineering structures. Hence, numerous investigations have been conducted in the past to study the behavior of concrete under such loading, but mostly of plain and conventionally reinforced concretes. With the increasingly widespread use of steel fibers in the field of structural application, it is therefore of great interest to investigate the performance of steel fiber reinforced concrete (SFRC) subjected to concentrated load. The objective of the present PhD thesis was to characterize the load-bearing and fracture behavior of SFRC under concentrated loading (i.e. point loading) by means of experimental approach. Based on the experimental results, it can be concluded that the presence of steel fibers substantially improved the load-bearing behavior of concrete under concentrated load and changed the failure mode of concrete from a brittle to a ductile one. The findings acquired here can be used as fundamental information for the composition and optimization of SFRC mixtures, the production of SFRC concrete elements as well as for the constructive design and practical application of SFRC structural members exposed to concentrated load.
Download or read book Steel Fiber Reinforced Concrete written by Harvinder Singh and published by Springer. This book was released on 2016-10-26 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses design aspects of steel fiber-reinforced concrete (SFRC) members, including the behavior of the SFRC and its modeling. It also examines the effect of various parameters governing the response of SFRC members in detail. Unlike other publications available in the form of guidelines, which mainly describe design methods based on experimental results, it describes the basic concepts and principles of designing structural members using SFRC as a structural material, predominantly subjected to flexure and shear. Although applications to special structures, such as bridges, retaining walls, tanks and silos are not specifically covered, the fundamental design concepts remain the same and can easily be extended to these elements. It introduces the principles and related theories for predicting the role of steel fibers in reinforcing concrete members concisely and logically, and presents various material models to predict the response of SFRC members in detail. These are then gradually extended to develop an analytical flexural model for the analysis and design of SFRC members. The lack of such a discussion is a major hindrance to the adoption of SFRC as a structural material in routine design practice. This book helps users appraise the role of fiber as reinforcement in concrete members used alone and/or along with conventional rebars. Applications to singly and doubly reinforced beams and slabs are illustrated with examples, using both SFRC and conventional reinforced concrete as a structural material. The influence of the addition of steel fibers on various mechanical properties of the SFRC members is discussed in detail, which is invaluable in helping designers and engineers create optimum designs. Lastly, it describes the generally accepted methods for specifying the steel fibers at the site along with the SFRC mixing methods, storage and transport and explains in detail methods to validate the adopted design. This book is useful to practicing engineers, researchers, and students.
Download or read book Fracture Processes of Concrete written by Jan G.M. van Mier and published by CRC Press. This book was released on 2017-07-14 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite tremendous advances made in fracture mechanics of concrete in recent years, very little information has been available on the nature of fracture processes and on reliable test methods for determining parameters for the different models. Moreover, most texts on this topic discuss numerical modeling but fail to consider experimentation. This book fills these gaps and synthesizes progress in the field in a simple, straightforward manner geared to practical applications.
Download or read book Test Method for Metallic Fibred Concrete Measuring the Flexural Tensile Strength Limit of Proportionality Lop Residual written by British Standards Institute Staff and published by . This book was released on 2005-07 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precast concrete, Fibre-reinforced concrete, Metals, Reinforcing materials, Concretes, Bend testing, Tensile testing, Cement and concrete technology, Flexural strength, Tensile strength, Tensile stress
Download or read book Structural Applications of Steel Fiber Reinforced Concrete Analysis and Design written by Abdeslam Reklaoui and published by . This book was released on 1988 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Code Requirements for Structural Concrete ACI 318 05 and Commentary ACI 318R 05 written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contribution of Steel Fiber in a Small Scale Reinforced Concrete Beam written by Nonih Gampuhur and published by . This book was released on 2015 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since today, fiber reinforced concrete is one of the most realistic materials to develop the use of concrete in load-bearing structure. The hooked-end steel fiber with two different the aspect ratio were used in this study. They are 65 mm aspect ratio with 0.55mm in diameter and 35 mm in length and 0.75 mm in diameter, 60 mm in length with 80 mm in aspect ratio. The volume fraction for both of steel fiber used is 1%. There are four concrete batches and each of batches consists of 3 beam specimens with dimension 750 mm x150 mm x150 mm and 6 cube specimens with 150 mm x 150 mm x 150 mm dimension. The beams were tested at 28 days under two-point load. The result showed that the addition of steel fiber in concrete improved the first cracking load, ultimate load, and ductility of the concrete beam. In comparison in terms of concrete compressive strength, SF35 improved for 12.94% and SF60 improved for 26.51% at 7days. Meanwhile, the compressive strength improved for 14.15% and 23.58% at 28 days for SF35 and SF60, respectively. The first crack (Pcr) was determined for the result obtained in experimental and SFRC showed significant increases to first crack load over conventional reinforced concrete beam. The SFRC beam with SF35 increased for 56.33% and SF60 for 68.67% for ultimate load (Pu), when compared to conventional reinforced concrete beam. This shows that longest SF was effective in resisting beam ultimate load compared with shortest SF.
Download or read book Shear Behavior of Steel Fiber Reinforced Prestressed Concrete Beams Without Shear Reinforcement written by Jae-Sung Cho and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The ACI 318-08 building code allows to use the steel fiber reinforcement as alternative shear reinforcement with satisfying certain criteria when a beam is required minimum shear reinforcement. However, this provision applies to a nonprestressed and prestressed concrete beam such that it could be conservative since the shear strength of prestressed concrete beam is generally enhanced due to the prestressing force. This is due partially to the fact that the provision has been accepted based on researches, mostly conducted in nonprestressed concrete beam. Most of experiments conducted for prestressed concrete beam in small scale tests, with a height of specimens were less than 10 in. A larger scale of experiment is required due to concerns of size effect. In addition, in order to evaluate the qualification of a Steel Fiber Reinforced Concrete (SFRC) mixture used for structural applications, such as increasing shear resistance, a material evaluation method is essential. Currently ASTM or ACI Committee 544 (Fiber-Reinforced Concrete) does not recommend any standardized test method for evaluating shear performance of a particular SFRC material. This study addresses the research gaps described above by testing large-scale Steel Fiber Reinforced Prestressed Concrete (SFRPC) beams as well as developing a simple laboratory test techniques. A total 13 simply-supported beams for large-scale test with a shear span to effective depth ratio of 3.0 and a height of 24 in. were subjected to monotonically-increased, concentrated load. The test parameters were mainly included compressive strength, volume fraction of steel fibers, compressive reinforcement ratio. The results of large-scale test showed that the use of hooked steel fibers in a volume fraction greater than or equal to 0.50% volume fraction of steel fibers (67 lb per cubic yard), which is less than requirement by ACI 318-08 (0.75%, 100 lb per cubic yard), led to substantial enhancement of shear behaviors including the first cracking, the ultimate, and ductility. High compressive strength of SFRC, greater than 9000 psi, which is higher than ACI 318-08 requirement (less than 6000 psi) could be used as well. However, there was no significant effect from compressive reinforcement ratio. A simply shear test method for SFRC was proposed in this study. The test apparatus is almost exactly the same as the conventional ASTM bending test with only minor modification, in addition, it could simulate a pure shear stress by adjusting loading and support positions. By introducing a proper reinforcement for bending stress, it was possible to evaluate shear performance of SFRC with clear and uncomplicated shear stress field in the critical section.
Download or read book Reinforced Concrete Structures written by Robert Park and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets out basic theory for the behavior of reinforced concrete structural elements and structures in considerable depth. Emphasizes behavior at the ultimate load, and, in particular, aspects of the seismic design of reinforced concrete structures. Based on American practice, but also examines European practice.
Download or read book Fibre Reinforced Cementitious Composites written by Arnon Bentur and published by CRC Press. This book was released on 2006-11-16 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced cementitious composites can be designed to have outstanding combinations of strength (five to ten times that of conventional concrete) and energy absorption capacity (up to 1000 times that of plain concrete). This second edition brings together in one volume the latest research developments in this rapidly expanding area. The book is split
Download or read book High performance Hybrid fibre Concrete written by Ivan Marković and published by IOS Press. This book was released on 2006 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In the research project presented in this PhD-thesis, an innovative type of fibre concrete is developed, with improved both the tensile strength and the ductility: the Hybrid-Fibre Concrete (HFC). The expression "Hybrid" refers to the "hybridisation" of fibres: short and long steel fibres were combined together in one concrete mixture. This is opposite to conventional steel fibre concretes, which contain only one type of fibre. The basic goal of combining short and long fibres is from one side to improve the tensile strength by the action of short fibres, and from the other side to improve the ductility by the action of long fibres." "In this research project, all important aspects needed for the development and application of Hybrid-Fibre Concrete have been considered. In total 15 mixtures, with different types and amounts of steel fibres were developed and tested in the fresh state (workability) as well as in the hardened state (uniaxial tensile tests, flexural tests, pullout tests of single fibres and compressive tests). A new analytical model for bridging of cracks by fibres was developed and successfully implemented for tensile softening response of HFC. At the end, the utilisation of HFC in the engineering practice was discussed, including a case-study on light prestressed long-span beams made of HFC."--BOOK JACKET.
Download or read book Fibrous Concrete written by Concrete Society and published by . This book was released on 1980 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiber Reinforced Cements and Concretes written by Colin D Johnston and published by CRC Press. This book was released on 2014-04-21 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes and simplifies the results of a considerable body of research and practical experience with a wide range of fiber-reinforced cementitious composites.
Download or read book Fibre Reinforced Concrete From Design to Structural Applications written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2020-08-01 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first international FRC workshop supported by RILEM and ACI was held in Bergamo (Italy) in 2004. At that time, a lack of specific building codes and standards was identified as the main inhibitor to the application of this technology in engineering practice. The workshop aim was placed on the identification of applications, guidelines, and research needs in order for this advanced technology to be transferred to professional practice. The second international FRC workshop, held in Montreal (Canada) in 2014, was the first ACI-fib joint technical event. Many of the objectives identified in 2004 had been achieved by various groups of researchers who shared a common interest in extending the application of FRC materials into the realm of structural engineering and design. The aim of the workshop was to provide the State-of-the-Art on the recent progress that had been made in term of specifications and actual applications for buildings, underground structures, and bridge projects worldwide. The rapid development of codes, the introduction of new materials and the growing interest of the construction industry suggested presenting this forum at closer intervals. In this context, the third international FRC workshop was held in Desenzano (Italy), four years after Montreal. In this first ACI-fib-RILEM joint technical event, the maturity gained through the recent technological developments and large-scale applications were used to show the acceptability of the concrete design using various fibre compositions. The growing interests of civil infrastructure owners in ultra-high-performance fibre-reinforced concrete (UHPFRC) and synthetic fibres in structural applications bring new challenges in terms of concrete technology and design recommendations. In such a short period of time, we have witnessed the proliferation of the use of fibres as structural reinforcement in various applications such as industrial floors, elevated slabs, precast tunnel lining sections, foundations, as well as bridge decks. We are now moving towards addressing many durability-based design requirements by the use of fibres, as well as the general serviceability-based design. However, the possibility of having a residual tensile strength after cracking of the concrete matrix requires a new conceptual approach for a proper design of FRC structural elements. With such a perspective in mind, the aim of FRC2018 workshop was to provide the State-of-the-Art on the recent progress in terms of specifications development, actual applications, and to expose users and researchers to the challenges in the design and construction of a wide variety of structural applications. Considering that at the time of the first workshop, in 2004, no structural codes were available on FRC, we have to recognize the enormous work done by researchers all over the world, who have presented at many FRC events, and convinced code bodies to include FRC among the reliable alternatives for structural applications. This will allow engineers to increasingly utilize FRC with confidence for designing safe and durable structures. Many presentations also clearly showed that FRC is a promising material for efficient rehabilitation of existing infrastructure in a broad spectrum of repair applications. These cases range from sustained gravity loads to harsh environmental conditions and seismic applications, which are some of the broadest ranges of applications in Civil Engineering. The workshop was attended by researchers, designers, owner and government representatives as well as participants from the construction and fibre industries. The presence of people with different expertise provided a unique opportunity to share knowledge and promote collaborative efforts. These interactions are essential for the common goal of making better and sustainable constructions in the near future. The workshop was attended by about 150 participants coming from 30 countries. Researchers from all the continents participated in the workshop, including 24 Ph.D. students, who brought their enthusiasm in FRC structural applications. For this reason, the workshop Co-chairs sincerely thank all the enterprises that sponsored this event. They also extend their appreciation for the support provided by the industry over the last 30 years which allowed research centers to study FRC materials and their properties, and develop applications to making its use more routine and accepted throughout the world. Their important contribution has been essential for moving the knowledge base forward. Finally, we appreciate the enormous support received from all three sponsoring organizations of ACI, fib and Rilem and look forward to paving the path for future collaborations in various areas of common interest so that the developmental work and implementation of new specifications and design procedures can be expedited internationally.
Download or read book The Strength and Behavior of Steel Fiber Reinforced Concrete Under Combined Tension Compression Loading written by R. W. Meier and published by . This book was released on 1983 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of steel fibers to concrete-type materials has been shown to improve many of the engineering properties of those materials. Notable among them is an enhancement in the tensile strength of an otherwise weak and brittle material. Although much is known about the tensile strength of steel-fiber reinforced concrete (SFRC) under one-dimensional state of stress, little is known with regard to the strength behavior under multi-dimensional tension-compression loading. This is attributed to a lack of suitable equipment for simultaneously applying tensile and compressive stresses. The research program described herein is focused on developing such equipment to study the behavior of SFRC under combined loadings. A review of the state-of-the-art research on the tensile strength of SFRC is given and a review of various methods of applying tensile stresses to concrete specimens is presented. The problem is to be overcome in applying a pure principal tensile stress are discussed.
Download or read book Numerical Modeling of Concrete Cracking written by Guenter Hofstetter and published by Springer Science & Business Media. This book was released on 2011-10-08 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the underlying theories of the different approaches for modeling cracking of concrete and provides a critical survey of the state-of-the-art in computational concrete mechanics. It covers a broad spectrum of topics related to modeling of cracks, including continuum-based and discrete crack models, meso-scale models, advanced discretization strategies to capture evolving cracks based on the concept of finite elements with embedded discontinuities and on the extended finite element method, and extensions to coupled problems such a hygro-mechanical problems as required in computational durability analyses of concrete structures.