Download or read book Design of Steel Concrete Composite Structures Using High Strength Materials written by J.Y. Richard Liew and published by Woodhead Publishing. This book was released on 2021-08-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. - Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards - Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way - Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members - Suggests a unified approach to designing columns with normal- and high-strength steel and concrete

Download or read book Analysis and Design of Steel and Composite Structures written by Qing Quan Liang and published by CRC Press. This book was released on 2018-10-08 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and composite steel–concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications. Featuring numerous step-by-step examples that clearly illustrate the detailed analysis and design of steel and composite members and connections, this practical and easy-to-understand text: Covers plates, members, connections, beams, frames, slabs, columns, and beam-columns Considers bending, axial load, compression, tension, and design for strength and serviceability Incorporates the author’s latest research on composite members Analysis and Design of Steel and Composite Structures is an essential course textbook on steel and composite structures for undergraduate and graduate students of structural and civil engineering, and an indispensable resource for practising structural and civil engineers and academic researchers. It provides a sound understanding of the behavior of structural members and systems.

Download or read book Composite Steel and Concrete Structures Fundamental Behaviour Second Edition written by D.J. Oehlers and published by Elsevier. This book was released on 2013-10-22 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis and behaviour of composite structural members that are made by joining a steel component to a concrete component. The emphasis of the book is to impart a fundamental understanding of how composite structures work, so engineers develop a feel for the behaviour of the structure, often missing when design is based solely by using codes of practice or by the direct application of prescribed equations. It is not the object to provide quick design procedures for composite members, as these are more than adequately covered by recourse to such aids as safe load tables. The subject should therefore be of interest to practising engineers, particularly if they are involved in the design of non-standard or unusual composite structures for buildings and bridges, or are involved in assessing, upgrading, strengthening or repairing existing composite structures. The fundamentals in composite construction are covered first, followed by more advanced topics that include: behaviour of mechanical and rib shear connectors; local buckling; beams with few shear connectors; moment redistribution and lateral-distortional buckling in continuous beams; longitudinal splitting; composite beams with service ducts; composite profiled beams and profiled slabs; composite columns; and the fatigue design and assessment of composite bridge beams.

Download or read book Modeling Steel and Composite Structures written by Pedro Vellasco and published by Butterworth-Heinemann. This book was released on 2017-05-23 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling Steel and Composite Structures explains the computational tools, methods and procedures used to design steel and composite structures. The reference begins with the main models used to determine structural behavior. This is followed by a detailed description of experimental models and their main requirements and care. Numerous simulations presenting non-linear response are illustrated as are their restrictions in terms of boundary conditions, main difficulties, solution strategies and methods adopted to surpass convergence difficulties. In addition, examples of the use of computational intelligence methods to simulate steel and composite structures response are presented. - Includes numerical models based in the finite element method - Provides numerous simulations, presenting a non-linear response - Contains examples of the use of computational intelligence methods to simulate steel and composite structures

Download or read book Steel and Composite Structures written by Y.C. Wang and published by CRC Press. This book was released on 2003-09-02 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and Composite Structures: Behaviour and Design for Fire Safety presents a systematic and thorough description of the behaviour of steel and composite structures in fire, and shows how design methods are developed to quantify our understanding. Quantitative descriptions of fire behaviour, heat transfer in construction elements and structural analysis using numerical methods are all addressed and existing codes and standards for steel and composite fire safety design are critically examined. Using a comprehensive and systematic description of structural fire safety engineering principles, the author explains and illustrates the important difference between the behaviour of isolated structural elements and whole structures under fire conditions. This book is a vital source of information to structural and fire engineers. It will also be of considerable interest and value to students and researchers in this field.

Download or read book Modern Trends in Research on Steel Aluminium and Composite Structures written by Marian A. Giżejowski and published by Routledge. This book was released on 2021-06-09 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.

Download or read book Elementary Behaviour of Composite Steel and Concrete Structural Members written by Deric J. Oehlers and published by Elsevier. This book was released on 1999-09 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface; Notation; Introduction; Sizing of Members; Elastic Analysis of Composite Beams; Rigid Plastic Analysis of Simply Supported Beams; Mechanical Shear Connectors; Transfer of Longitudinal Shear Forces; Stocky Columns; Slender Columns; Post-Cracking Dowel Strength; Rigid Plastic Analysis of Continuous Composite Beams; Lateral-Distortional Buckling; General Fatigue Analysis Procedures; Fatigue Analysis of Stud Shear Connectors; Index.

Download or read book Steel Concrete Composite Structures written by R. Narayanan and published by CRC Press. This book was released on 1988-12-31 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of ten extensive review chapters by different authors.

Download or read book Composite Construction in Steel and Concrete VI written by Roberto T. Leon and published by Amer Society of Civil Engineers. This book was released on 2011 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the sixth International Conference on Composite Construction in Steel and Concrete held at the Devil s Thumb Ranch in Tabernash, Colorado, July 20 24, 2008. Sponsored by Engineering Conferences International; the Structural Engineering Institute of ASCE. This collection contains the 63 technical papers representing the state-of-the-art in composite construction worldwide. Topics include: composite bridges, composite slabs, shear connectors, composite columns, innovative composite structural systems, fire and seismic resistance of composite structural systems and practical applications. These papers will be valuable to structural engineers and allied professionals engaged in construction with steel and concrete composites.

Download or read book Behaviour and Design of Composite Steel and Concrete Building Structures written by Brian Uy and published by . This book was released on 2023-01-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights all the rapid changes occurring in the understanding of the behavior and design of composite steel-concrete structures and links them to a variety of international standards. It addresses the needs created by the increasing internationalization of engineering practices and the need for structural engineers to be adept in design provisions from more than their home nations. It offers an in-depth treatment of the fundamental behavior and design of composite steel-concrete building structures incorporating beams, columns, joints, slabs, and systems.

Download or read book Advances in Steel Concrete Composite Structures written by J. Y. Richard Liew and published by Research Publishing Service. This book was released on 2012 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Joints in Steel and Composite Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2016-06-22 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 Design of steel structures: Part 1-8 Design of joints Joints in composite construction are also addressed through references to Eurocode 4 Design of composite steel and concrete structures Part 1-1: General rules and rules for buildings. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.

Download or read book Fatigue Design of Steel and Composite Structures written by Alain Nussbaumer and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.

Download or read book Composite Structures of Steel and Concrete Bridges with a commentary on BS5400 part 5 written by Roger Paul Johnson and published by Grafton Books. This book was released on 1979-01-01 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Finite Element Analysis and Design of Steel and Steel Concrete Composite Bridges written by Ehab Ellobody and published by Butterworth-Heinemann. This book was released on 2014-05-30 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, bridge engineers and researchers are increasingly turning to the finite element method for the design of Steel and Steel-Concrete Composite Bridges. However, the complexity of the method has made the transition slow. Based on twenty years of experience, Finite Element Analysis and Design of Steel and Steel-Concrete Composite Bridges provides structural engineers and researchers with detailed modeling techniques for creating robust design models. The book's seven chapters begin with an overview of the various forms of modern steel and steel–concrete composite bridges as well as current design codes. This is followed by self-contained chapters concerning: nonlinear material behavior of the bridge components, applied loads and stability of steel and steel–concrete composite bridges, and design of steel and steel–concrete composite bridge components. - Constitutive models for construction materials including material non-linearity and geometric non-linearity - The mechanical approach including problem setup, strain energy, external energy and potential energy), mathematics behind the method - Commonly available finite elements codes for the design of steel bridges - Explains how the design information from Finite Element Analysis is incorporated into Building information models to obtain quantity information, cost analysis

Download or read book Steel Bridges written by Manfred Hirt and published by CRC Press. This book was released on 2013-06-05 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This English translation of the successful French edition presents the conception and design of steel and steel-concrete composite bridges, from simple beam bridges to cable supported structures. The book focuses primarily on road bridges, emphasizing the basis of their conception and the fundamentals that must be considered to assure structural safety and serviceability, as well as highlighting the necessary design checks. The principles are extended in later chapters to railway bridges as well as bridges for pedestrians and cyclists. Particular attention is paid to consideration of the dynamic performance.

Download or read book Composite Construction in Steel and Concrete IV written by Jerome F. Hajjar and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 85 papers presented at the Composite Construction in Steel and Concrete IV Conference, held in Banff, Alberta, Canada, May 28-June 2, 2000.