Download or read book Tangent Modulus and the Strength of Steel Columns in Tests written by Olin Hanson Basquin and published by . This book was released on 1924 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability of Steel Columns Protected by Intumescent Coatings Subjected to Natural Fires written by Chao Zhang and published by Springer. This book was released on 2015-02-25 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis studied the effect of aging of intumescent coatings (ICs) on the reliability of protected steel columns in fire condition and developed a probabilistic approach to assess the service life of ICs applied on steel columns. In the study, Monte Carlo simulations were conducted to obtain the reliability index or failure probability of steel columns protected by ICs subjected to compartment fires. The effect of aging of intumescent coatings on the failure probability of protected steel columns was investigated by using variable insulation property of intumescent coatings in the simulation. The test data on aging effect on insulation property of intumescent coatings from literature was used. Based on the reliability analysis, a probabilistic approach is given to determine the service life of intumescent coatings for steel columns. In that approach, the failure probability of the protected steel columns is compared with the target probability of the structural fire design. The approach can also be used for probabilistic analysis of steel columns protected by conventional inert fire protection materials.
Download or read book Fire Tests of Steel Columns Protected with Siliceous Aggregate Concrete written by Nolan D. Mitchell and published by . This book was released on 1951 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire Tests of Steel Columns Encased with Gypsum Lath and Plaster written by Nolan D. Mitchell and published by . This book was released on 1953 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Filled Stainless Steel Tubular Columns written by Vipulkumar Patel and published by CRC Press. This book was released on 2018-12-07 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete-filled stainless steel tubular (CFSST) columns are increasingly used in modern composite construction due to their high strength, high ductility, high corrosion resistance, high durability and aesthetics and ease of maintenance. Thin-walled CFSST columns are characterized by the different strain-hardening behavior of stainless steel in tension and in compression, local buckling of stainless steel tubes and concrete confinement. Design codes and numerical models often overestimate or underestimate the ultimate strengths of CFSST columns. This book presents accurate and efficient computational models for the nonlinear inelastic analysis and design of CFSST short and slender columns under axial load and biaxial bending. The effects of different strain-hardening characteristics of stainless steel in tension and in compression, progressive local and post-local buckling of stainless steel tubes and concrete confinement are taken into account in the computational models. The numerical models simulate the axial load-strain behavior, moment-curvature curves, axial load-deflection responses and axial load-moment strength interaction diagrams of CFSST columns. The book describes the mathematical formulations, computational procedures and model verifications for circular and rectangular CFSST short and slender columns. The behavior of CFSST columns under various loading conditions is demonstrated by numerous numerical examples. This book is written for practising structural and civil engineers, academic researchers and graduate students in civil engineering who are interested in the latest computational techniques and design methods for CFSST columns.
Download or read book Concrete Filled Double Skin Steel Tubular Columns written by Mostafa Fahmi Hassanein and published by Elsevier. This book was released on 2023-02-16 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete-Filled Double-Skin Steel Tubular Columns: Behavior and Design provides a thorough review of the recent advances on the behaviour and design of concrete-filled double-skin steel tubular (CFDST) columns. Drawing on their extensive knowledge and research, the authors cover topics such as different CFDST columns under axial compression, innovative techniques including the use of rubberised concrete, columns with different cross-sections, and steel material envelops and failure modes. This book is an overview of research carried out by this highly experienced and leading research group with specialist knowledge in the topic. It is an invaluable resource for researchers, graduates and post-graduate civil engineers and civil engineering designers. Provides a comprehensive overview of advances on the behaviour and design of concrete-filled double-skin steel tubular (CFDST) columns over the past decade Gives deep-dive explanation of important concepts such as the void ratio which makes these girders different from conventional concrete-filled steel tubular (CFST) columns Explains the failure modes of short and slender columns under compression, with detailed illustrations and photos from both real-life and virtual tests performed by the authors Presents in-depth analysis of the ultimate strengths of CFDST columns with different steel envelops and concrete infills Makes a detailed comparison with available international codes, such as Eurocode 3, and provides recommendations for future studies Discusses new innovative confining stress-based design for different types of CFDST short columns
Download or read book Design of High Strength Steel Reinforced Concrete Columns written by Sing-Ping Chiew and published by CRC Press. This book was released on 2018-04-17 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns – A Eurocode 4 Approach. Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials – columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volume provides detailed worked examples on use of these high strength materials. This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.
Download or read book Theory of Beam Columns Volume 1 written by Wai-Fah Chen and published by J. Ross Publishing. This book was released on 2007-12-15 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume of a two-volume work presenting the basic theoretical principles, methods of analysis in obtaining the solutions of beam-columns, and developments of theories of biaxially loaded beam-columns, and to show how these theories can be used in the solution of practical design problems. After presenting the basic theory the authors proceed to solutions of particular problems. Both refined and simplified design procedures, along with their limitations, are presented. It is left to the engineer to choose among them as he sees fit. An unabridged J. Ross Publishing republication of the edition published by McGraw-Hill, Inc., New York, 1976, 513pp.
Download or read book Steel and Timber Structures written by George A. Hool and published by . This book was released on 1924 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cambria Steel written by Cambria Steel Co and published by . This book was released on 1907 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Composite Columns written by Chong Rong and published by Elsevier. This book was released on 2022-11-25 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete Composite Columns: Behavior and Design focuses on confined concrete and establishes analytical methods for each composite column. The volume moves beyond existing resources to study the relationship between existing composite structures and design methods for the sectional form of a concrete composite structure. Chapters cover the failure criteria of concrete, confined concrete types, models, including axial stress prediction, analysis and design-oriented constitutive models, the design and analysis of section form, axial and seismic behaviors of concrete composite columns, the seismic design of concrete composite columns, and the engineering application. This book offers a practical solution to students, researchers, and engineers working with both steel and FRP-confined concrete composite columns. Focuses on confined concrete and provides analytical methods for composite columns Discusses different types of composite columns, including FRP and steel-concrete composites Considers the construction method and confining forces in composite concrete columns Details confined concrete from basic theoretical analysis to seismic behaviors and design methods Provides a solution to students, researchers, and engineers working with confined composite columns
Download or read book Structural Stability of Steel written by Theodore V. Galambos and published by John Wiley & Sons. This book was released on 2008-04-18 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical guide to structural stability theory for the design of safe steel structures Not only does this book provide readers with a solid foundation in structural stability theory, it also offers them a practical, working knowledge of how this theory translates into design specifications for safe steel structures. Structural Stability of Steel features detailed discussions of the elastic and inelastic stability of steel columns, beams, beam-columns, and frames alongside numerous worked examples. For each type of structural member or system, the authors set forth recommended design rules with clear explanations of how they were derived. Following an introduction to the principles of stability theory, the book covers: * Stability of axially loaded planar elastic systems * Tangent-modulus, reduced-modulus, and maximum strength theories * Elastic and inelastic stability limits of planar beam-columns * Elastic and inelastic instability of planar frames * Out-of-plane, lateral-torsional buckling of beams, columns, and beam-columns The final two chapters focus on the application of stability theory to the practical design of steel structures, with special emphasis on examples based on the 2005 Specification for Structural Steel Buildings of the American Institute of Steel Construction. Problem sets at the end of each chapter enable readers to put their newfound knowledge into practice by solving actual instability problems. With its clear logical progression from theory to design implementation, this book is an ideal textbook for upper-level undergraduates and graduate students in structural engineering. Practicing engineers should also turn to this book for expert assistance in investigating and solving a myriad of stability problems.
Download or read book Popular Mechanics Complete Home How to written by Albert Jackson and published by Sterling Publishing Company, Inc.. This book was released on 2009 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Popular Mechanics (9.6 million readers every month), the hands-down experts on the subject of how things work, comes the most complete and up-to-date DIY guide ever published. This highly sophisticated household manual will instantly become the gold standard for anybody who fixes anything. Filled with color photos, drawings, and diagrams, this encyclopedic how-to covers every area of concern to house and apartment owners, with information on planning ahead; decorating; repairs and improvements; security; infestation, rot, and d& electricity; plumbing; heating; outdoor care; and tools and skills. And it’s easy to find the solution to the particular problem that concerns you, without having to go from page to page of continuous text: the straightforward design breaks down the subjects into clearly defined, color-coded chapters. So whether you’re looking for advice on applying finishes, adding decorative paint effects, constructing walls, fixing the roof, or installing a burglar alarm, the instructions are here. • National Publicity • Cross Marketing on the Website, PM zone • Featured in PM’s “Great Stuff Column” • Featured in PM E-Newsletter (125,000 subscribers) • Included in PM “Wish List for Guys” Gift Registry • Advertising in PM Magazine
Download or read book Iron and Steel Constructional Work written by Karl Schindler and published by . This book was released on 1912 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete steel Construction written by Henry Turner Eddy and published by . This book was released on 1914 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This antiquarian volume contains a complete manual of the art of angling for roach, with comments on methodology, equipment, tactics, and other information useful to the roach fisherman. Written in simple, plain language and including much in the way of practical instructions and useful tips and hints, this text will prove invaluable to the roach fisherman, and makes for a great addition to collections of angling literature. The chapters of this book include: The Roach, Descriptive, Statistical, Roach Waters, The Roach Fisherman, Baits and Ground-Baits, Major Tactics and Major Considerations, Methods and Styles, Odds and Ends In Lighter Vein, and Hempseed Fishing for Roach. We are republishing this antiquarian volume now complete with a specially commissioned new introduction on the history of fishing.
Download or read book Steel construction a text and reference book covering the design of steel written by Henry Jackson Burt and published by . This book was released on 1926 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete steel written by Walter Noble Twelvetrees and published by . This book was released on 1905 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
