Download or read book Steam Tables written by Joseph H. Keenan and published by Wiley. This book was released on 1969-01-16 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steam Tables Thermodynamic Properties of Water Including Vapor, Liquid, and Solid Phases —English Units By Joseph H. Keenan, M.I.T.; Frederick G. Keyes, M.I.T.; Philip G. Hill, Queen’s University; and Joan G. Moore, M.I.T. During the past decade a substantial body of experimental data on thermodynamic and transport properties of water has been produced and published by research groups in the USSR, Great Britain, Czechoslovakia, Canada and the United States. This book presents the results of a new and independent correlation of all this new thermodynamic data and all previously existing data. It is a new work to replace the well-known and widely used Keenan and Keyes tables. The tables in this new book are based upon a unique accomplishment. For the first time the whole body of high-quality experimental data on liquid and vapor water has been faithfully represented by a single fundamental equation. From this equation all thermodynamic properties can be calculated for any state. This equation is believed to extrapolate dependably in temperature from the upper limit of precise measurement (about 1500°F) to about 2400°F. Because of the increasing importance to both the practicing engineer and the student of a wide variety of problems that cannot be approximated by steady-flow idealization, internal energies are tabulated for all states: saturated liquid and vapor, compressed liquid, and superheated vapor. A reasonable range of metastable states is covered as extensions of the superheated-vapor and compressed-liquid tables. The Mollier and temperature-entropy charts are extended to substantially higher pressures and temperatures. This book also includes a table for ice-vapor equilibrium, an improved chart of isentropic exponents, charts of Prandtl number, a set of charts of heat capacity of liquid and vapor, and extensive tables of viscosity and thermal conductivity reproduced from the documents of the Sixth International Conference on the Properties of Steam. The book features legible type set by a computer-controlled typesetting machine. This results in accuracy, compactness, and convenience.
Download or read book Nbs Nrc Steam Tables written by Lester Haar and published by CRC Press. This book was released on 1984-01-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME International Steam Tables for Industrial Use written by American Society of Mechanical Engineers and published by . This book was released on 2000 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing the tradition of the ASME Steam Tables that dates back to 1967, ASME International Steam Tables for Industrial Use places at your fingertips the thermodynamic, transport, and other properties of water and steam in a handy, printed soft cover format. Based on the International Association for the Properties of Water and Steam- Industrial Formulation 1997 (IAPWS- IF97), this new book complements the software, ASME Steam Properties for Industrial Use, published in January 1999. Together, these important references are the international standard for power plant and industrial calculations, used in conjunction with contract commitments. The tables have been calculated, and reproduce values from, the computer software. The tables have fewer points than in previous editions of the Steam Tables, and they are intended for estimation and ready reference rather than for serious design and precise interpolation. This volume was published on behalf of the ASME Research and Technology Committee on Water and Steam in Thermal Systems, Subcommittee on Properties of Steam.
Download or read book The Callendar Steam Tables written by Hugh Longbourne Callendar and published by . This book was released on 1915 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steam Tables written by RS Khurmi | N Khurmi and published by S. Chand Publishing. This book was released on 2008 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Favourable and warm reception,which the previous editions and reprints of this booklet have enjoyed at home and abroad,has been a matter of great satisfaction to me.
Download or read book Steam Tables written by C. P. Kothandaraman and published by New Age International. This book was released on 2007 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: # Extensive Table Of Properties Of Saturated Steam Both Temperature Based And Pressure Based# Elaborate Table Of Properties Of Superheated Steam With All Required Properties Readable At One Glance# Table Of Van Der Waalls Constants And Critical Compressibility Factor For Gases# Table Of Enthalpy Of Formation And Higher And Lower Heating Values Of Fuels# Table Of Thermodynamic Properties Of Gases# Table Of Thermal Properties Of Saturated Water# Mollier Chart For Steam# Psychrometric Chart# Generalized Compressibility Chart
Download or read book International Steam Tables written by Hans-Joachim Kretzschmar and published by Springer. This book was released on 2019-04-25 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains steam tables for practical industrial use calculated by using the international standard IAPWS-IF97 for the thermodynamic properties of water and steam and the IAPWS industrial standards for transport and other properties. The complete set of equations of IAPWS-IF97 is presented including all supplementary backward equations adopted by IAPWS for fast calculations of heat cycles, boilers, and steam turbines. The calculation of the properties is not only shown for the usual input parameter pairs pressure and temperature, but also for the parameters pressure and enthalpy, pressure and entropy, enthalpy and entropy. It is for the first time that such a description is given. For designing advanced energy conversion processes, tables and property calculation algorithms of steam up to 2000 °C are given. In addition, these steam tables contain the following features: • Formulas to calculate arbitrary partial derivatives of the eight most important properties from IAPWS-IF97, which are very helpful in non-stationary process modelling, are shown. • The uncertainty values of IAPWS-IF97 regarding the most important properties are included. • Pressure-temperature diagrams with isolines of 26 thermodynamic, transport and other properties are added.
Download or read book International Steam Tables Properties of Water and Steam based on the Industrial Formulation IAPWS IF97 written by Wolfgang Wagner and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: These steam tables have been calculated using the international standard for the thermodynamic properties of water and steam, the IAPWS-IF97 formulation, and the international standards for transport and other properties. In addition, the complete set of equations of IAPWS-IF97 is presented including all supplementary backward equations adopted by IAPWS between 2001 and 2005 for fast calculations of heat cycles, boilers, and steam turbines.
Download or read book Steam Tables in SI Units Wasserdampftafeln written by U. Grigull and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tables and diagrams concerning the properties of ordinary water substance - as offered in this booklet - are mainly meant for use by students at universities and colleges so that they may be able to solve problems in the fields of power and chemical engineering, where water and steam are serving as working or process medium. On the other hand the tables and diagrams should support engineers in research work and industrial practice to obtain a quick and reliable general view of the proper ties of water substance. The thermodynamic properties of state have been calculated according to a formu lation given by Haar, Gallagher and Kell; this formulation was preliminarily adopted in 1983 by the "International Association for the Properties of Steam" (lAPS). All the other properties have been calculated according to the respective "Releases" of lAPS. Only units of the "International System of Units" (SI-Units) and their decimal multi ples and parts have been used. The detailed conversion tables facilitate comparisons with former material. We hope that the "Student's Tables" will prove a useful source for both, students and engineers. Munich, May 1984 The Editors Vorwort Die hier vorgelegten Tafeln und Diagramme uber die Eigenschaften von gew6hnlichem Wasser sind in erster Linie fur den Gebrauch der Studenten an Universitaten und Fach hochschulen bestimmt. Diese sollen dam it Probleme aus der Energietechnik und der Verfahrenstechnik 16sen k6nnen, bei denen Wasser und Wasserdampf als Arbeits-oder ProzeBmedium eine Rolle spielen.
Download or read book Steam Plant Operation 10th Edition written by Everett B. Woodruff and published by McGraw Hill Professional. This book was released on 2016-11-04 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference on the role of steam in the production and operation of power plants for electric generation and industrial process applications For more than 80 years, Steam Plant Operation has been an unmatched source of information on steam power plants, including design, operation, and maintenance. The Tenth Edition emphasizes the importance of devising a comprehensive energy plan utilizing all economical sources of energy, including fossil fuels, nuclear power, and renewable energy sources. This trusted classic discusses the important role that steam plays in our power production and identifies the associated risks and potential problems of other energy sources. You will find concise explanations of key concepts, from fundamentals through design and operation. For energy students, Steam Plant Operation provides a solid introduction to steam power plant technology. This practical guide includes common power plant calculations such as plant heat rate, boiler efficiency, pump performance, combustion processes, and explains the systems necessary to control plant emissions. Numerous illustrations and clear presentation of the material will prove invaluable for those preparing for an operator’s license exam. Examples throughout show real-world application of the topics discussed. COVERAGE INCLUDES: • Steam and Its Importance • Boilers • Design and Construction of Boilers • Combustion of Fuels • Boiler Settings, Combustion Systems, and Auxiliary Equipment • Boiler Accessories • Operation and Maintenance of Boilers • Pumps • Steam Turbines, Condensers, and Cooling Towers • Operating and Maintaining Steam Turbines, Condensers, Cooling Towers, and Auxiliaries • Auxiliary Steam Plant Equipment • Environmental Control Systems • Waste-to-Energy Plants
Download or read book Fundamentals of Food Process Engineering written by Romeo T. Toledo and published by Springer Science & Business Media. This book was released on 2007-03-06 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for the upper level undergraduate, this updated book is also a solid reference for the graduate food engineering student and professional. This edition features the addition of sections on freezing, pumps, the use of chemical reaction kinetic date for thermal process optimization, and vacuum belt drying. New sections on accurate temperature measurements, microbiological inactivation curves, inactivation of microorganisms and enzymes, pasteurization, and entrainment are included, as are non-linear curve fitting and processes dependent on fluid film thickness. Other sections have been expanded.
Download or read book Steam and Gas Tables with Computer Equations written by Thomas F. Jr. Irving and published by Elsevier. This book was released on 2012-12-02 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steam and Gas Tables with Computer Equations presents tables illustrating the thermodynamic properties of steam and air, along with computer equations. Additional equations for a number of other gaseous substances which are useful in engineering investigations are included. This book is comprised of two chapters and begins with a discussion on the thermodynamic properties of steam, which can be divided into saturation and superheat properties. The various thermodynamic properties, including saturation temperature and pressure and liquid and vapor saturation entropy, are represented with three basic types of equations from the triple point to the critical point. The accuracy of the properties calculated from the base data is also considered. The next chapter deals with the thermodynamic properties of air and other gases (ethane, hydrogen, methane, nitrogen, oxygen propane, n-butane), including those properties which are useful in engineering design and analysis (specific heat at constant pressure and volume, enthalpy and entropy function, isentropic pressure function, etc). This monograph will serve as a useful guide for chemists, mathematicians, and computer programmers and scientists.
Download or read book Steam Tables With Mollier Diagrams In S I Units written by R. S. Khurmi and published by . This book was released on 1990 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Mechanical Engineering written by Pravin Kumar and published by Pearson Education India. This book was released on with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Mechanical Engineering covers a wide range of topics and engineering concepts that are required to be learnt as in any undergraduate engineering course. Divided into three parts, this book lays emphasis on explaining the logic and physics of critical problems to develop analytical skills in students.
Download or read book Thermofluids written by Michael Horsley and published by CRC Press. This book was released on 1996-12-07 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two associated subjects of thermodynamics and fluid mechanics are combined in this book to provide the reader with an easy-to-follow text which emphasizes the essential coherence of the material.
Download or read book Steam Tables and Moiller Diagrams S I Units written by R. K. Rajput and published by Laxmi Publications. This book was released on 2009 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book VDI Heat Atlas written by VDI Gesellschaft and published by Springer Science & Business Media. This book was released on 2010-07-21 with total page 1608 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 50 years, the Springer VDI Heat Atlas has been an indispensable working means for engineers dealing with questions of heat transfer. Featuring 50% more content, this new edition covers most fields of heat transfer in industrial and engineering applications. It presents the interrelationships between basic scientific methods, experimental techniques, model-based analysis and their transfer to technical applications.
