Download or read book The Flow of Homogeneous Fluids Through Porous Media written by Morris Muskat and published by . This book was released on 2004 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Oil and Gas Flow in Porous Media written by Dang Li and published by Springer Nature. This book was released on 2020-08-17 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses various aspects of percolation mechanics. It starts with the driving forces and driving modes and then examines in detail the steady state percolation of single-phase incompressible fluids, percolation law of natural gas and percolation of non-Newtonian fluids. Progressing from simple to complex concepts, it also analyzes Darcy’s law, providing a basis for the study of reservoir engineering, oil recovery engineering and reservoir numerical simulation. It serves as a textbook for undergraduate students majoring in petroleum engineering, petroleum geology and groundwater engineering, and offers a valuable reference guide for graduate students, researchers and technical engineers engaged in oil and gas exploration and development.
Download or read book Unsteady state Fluid Flow written by E.J. Hoffman and published by Elsevier. This book was released on 1999-07-02 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ubiquitous examples of unsteady-state fluid flow pertain to the production or depletion of oil and gas reservoirs. After introductory information about petroleum-bearing formations and fields, reservoirs, and geologic codes, empirical methods for correlating and predicting unsteady-state behavior are presented. This is followed by a more theoretical presentation based on the classical partial differential equations for flow through porous media.Whereas these equations can be simplified for the flow of (compressible) fluids, and idealized solutions exist in terms of Fourier series for linear flow and Bessel functions for radial flow, the flow of compressible gases requires computer solutions, read approximations. An analysis of computer solutions indicates, fortuitously, that the unsteady-state behavior can be reproduced by steady-state density or pressure profiles at successive times. This will demark draw down and the transition to long-term depletion for reservoirs with closed outer boundaries.As an alternative, unsteady-state flow may be presented in terms of volume and surface integrals, and the methodology is fully developed with examples furnished. Among other things, permeability and reserves can be estimated from well flow tests.The foregoing leads to an examination of boundary conditions and degrees of freedom and raises arguments that the classical partial differential equations of mathematical physics may not be allowable representations. For so-called open petroleum reservoirs where say water-drive exists, the simplifications based on successive steady-state profiles provide a useful means of representation, which is detailed in the form of material balances.Unsteady-State Fluid Flow provides:• empirical and classical methods for correlating and predicting the unsteady-state behavior of petroleum reservoirs• analysis of unsteady-state behavior, both in terms of the classical partial differential equations, and in terms of volume and surface integrals• simplifications based on successive steady-state profiles which permit application to the depletion of both closed reservoirs and open reservoirs, and serves to distinguish drawdown, transition and long-term depletion performance.
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book Computational Methods for Multiphase Flows in Porous Media written by Zhangxin Chen and published by SIAM. This book was released on 2006-04-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a fundamental and practical introduction to the use of computational methods. A thorough discussion of practical aspects of the subject is presented in a consistent manner, and the level of treatment is rigorous without being unnecessarily abstract. Each chapter ends with bibliographic information and exercises.
Download or read book Fundamentals of Gas Reservoir Engineering written by J. Hagoort and published by Elsevier. This book was released on 1988-06-01 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas reservoir engineering is the branch of reservoir engineering that deals exclusively with reservoirs of non-associated gas. The prime purpose of reservoir engineering is the formulation of development and production plans that will result in maximum recovery for a given set of economic, environmental and technical constraints. This is not a one-time activity but needs continual updating throughout the production life of a reservoir.The objective of this book is to bring together the fundamentals of gas reservoir engineering in a coherent and systematic manner. It is intended both for students who are new to the subject and practitioners, who may use this book as a reference and refresher. Each chapter can be read independently of the others and includes several, completely worked exercises. These exercises are an integral part of the book; they not only illustrate the theory but also show how to apply the theory to practical problems.Chapters 2, 3 and 4 are concerned with the basic physical properties of reservoirs and natural gas fluids, insofar as of relevance to gas reservoir engineering. Chapter 5 deals with the volumetric estimation of hydrocarbon fluids in-place and the recoverable hydrocarbon reserves of gas reservoirs. Chapter 6 presents the material balance method, a classic method for the analysis of reservoir performance based on the Law of Conservation of Mass. Chapters 7-10 discuss various aspects of the flow of natural gas in the reservoir and the wellbore: single phase flow in porous and permeable media; gaswell testing methods based on single-phase flow principles; the mechanics of gas flow in the wellbore; the problem of water coning, the production of water along with the gas in gas reservoirs with underlaying bottom water. Chapter 11 discusses natural depletion, the common development option for dry and wet gas reservoirs. The development of gas-condensate reservoirs by gas injection is treated in Chapter 12.Appendix A lists the commonly used units in gas reservoir engineering, along with their conversion factors. Appendix B includes some special physical and mathematical constants that are of particular interest in gas reservoir engineering. Finally, Appendix C contains the physical properties of some common natural-gas components.
Download or read book A Systems Description of Flow Through Porous Media written by Jan Dirk Jansen and published by Springer Science & Business Media. This book was released on 2013-05-23 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text forms part of material taught during a course in advanced reservoir simulation at Delft University of Technology over the past 10 years. The contents have also been presented at various short courses for industrial and academic researchers interested in background knowledge needed to perform research in the area of closed-loop reservoir management, also known as smart fields, related to e.g. model-based production optimization, data assimilation (or history matching), model reduction, or upscaling techniques. Each of these topics has connections to system-theoretical concepts. The introductory part of the course, i.e. the systems description of flow through porous media, forms the topic of this brief monograph. The main objective is to present the classic reservoir simulation equations in a notation that facilitates the use of concepts from the systems-and-control literature. Although the theory is limited to the relatively simple situation of horizontal two-phase (oil-water) flow, it covers several typical aspects of porous-media flow. The first chapter gives a brief review of the basic equations to represent single-phase and two-phase flow. It discusses the governing partial-differential equations, their physical interpretation, spatial discretization with finite differences, and the treatment of wells. It contains well-known theory and is primarily meant to form a basis for the next chapter where the equations will be reformulated in terms of systems-and-control notation. The second chapter develops representations in state-space notation of the porous-media flow equations. The systematic use of matrix partitioning to describe the different types of inputs leads to a description in terms of nonlinear ordinary-differential and algebraic equations with (state-dependent) system, input, output and direct-throughput matrices. Other topics include generalized state-space representations, linearization, elimination of prescribed pressures, the tracing of stream lines, lift tables, computational aspects, and the derivation of an energy balance for porous-media flow. The third chapter first treats the analytical solution of linear systems of ordinary differential equations for single-phase flow. Next it moves on to the numerical solution of the two-phase flow equations, covering various aspects like implicit, explicit or mixed (IMPES) time discretizations and associated stability issues, Newton-Raphson iteration, streamline simulation, automatic time-stepping, and other computational aspects. The chapter concludes with simple numerical examples to illustrate these and other aspects such as mobility effects, well-constraint switching, time-stepping statistics, and system-energy accounting. The contents of this brief should be of value to students and researchers interested in the application of systems-and-control concepts to oil and gas reservoir simulation and other applications of subsurface flow simulation such as CO2 storage, geothermal energy, or groundwater remediation.
Download or read book Petrophysical Characterization and Fluids Transport in Unconventional Reservoirs written by Jianchao Cai and published by Elsevier. This book was released on 2019-01-24 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petrophysical Characterization and Fluids Transport in Unconventional Reservoirs presents a comprehensive look at these new methods and technologies for the petrophysical characterization of unconventional reservoirs, including recent theoretical advances and modeling on fluids transport in unconventional reservoirs. The book is a valuable tool for geoscientists and engineers working in academia and industry. Many novel technologies and approaches, including petrophysics, multi-scale modelling, rock reconstruction and upscaling approaches are discussed, along with the challenge of the development of unconventional reservoirs and the mechanism of multi-phase/multi-scale flow and transport in these structures. - Includes both practical and theoretical research for the characterization of unconventional reservoirs - Covers the basic approaches and mechanisms for enhanced recovery techniques in unconventional reservoirs - Presents the latest research in the fluid transport processes in unconventional reservoirs
Download or read book Development Geology Reference Manual written by Diana Morton-Thompson and published by AAPG. This book was released on 1993 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Flow In Porous Media Fundamentals And Applications written by Liang Xue and published by World Scientific. This book was released on 2020-09-24 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processes of flow and displacement of multiphase fluids through porous media occur in many subsurface systems and have found wide applications in many scientific, technical, and engineering fields. This book focuses on the fundamental theory of fluid flow in porous media, covering fluid flow theory in classical and complex porous media, such as fractured porous media and physicochemical fluid flow theory. Key concepts are introduced concisely and derivations of equations are presented logically. Solutions of some practical problems are given so that the reader can understand how to apply these abstract equations to real world situations. The content has been extended to cover fluid flow in unconventional reservoirs. This book is suitable for senior undergraduate and graduate students as a textbook in petroleum engineering, hydrogeology, groundwater hydrology, soil sciences, and other related engineering fields.
Download or read book Working Guide to Reservoir Rock Properties and Fluid Flow written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2009-08-24 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Working Guide to Reservoir Rock Properties and Fluid Flow provides an introduction to the properties of rocks and fluids that are essential in petroleum engineering. The book is organized into three parts. Part 1 discusses the classification of reservoirs and reservoir fluids. Part 2 explains different rock properties, including porosity, saturation, wettability, surface and interfacial tension, permeability, and compressibility. Part 3 presents the mathematical relationships that describe the flow behavior of the reservoir fluids. The primary reservoir characteristics that must be considered include: types of fluids in the reservoir, flow regimes, reservoir geometry, and the number of flowing fluids in the reservoir. Each part concludes with sample problems to test readers knowledge of the topic covered. - Critical properties of reservoir rocks Fluid (oil, water, and gas) - PVT relationships - Methods to calculate hydrocarbons initially in place - Dynamic techniques to assess reservoir performance - Parameters that impact well/reservoir performance over time
Download or read book Dynamics of Fluids in Porous Media written by Jacob Bear and published by . This book was released on 1972 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shared Earth Modeling written by John R. Fanchi and published by Gulf Professional Publishing. This book was released on 2002-07-31 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to shared earth modeling -- Geology -- Petrophysics -- Well logging -- Geophysics -- Fluid properties -- Measures of rock-fluid interactions -- Applications of rock-fluid interactions -- Fluid flow equations -- Fundamentals of reservoir characterization -- Modern reservoir characterization Techniques -- Well testing -- Production analysis -- Reservoir flow simulation -- Reservoir management -- Improved recovery.
Download or read book Fluids in Porous Media written by Henk Huinink and published by Morgan & Claypool Publishers. This book was released on 2016-09-06 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader into the field of the physics of processes occurring in porous media. It targets Master and PhD students who need to gain fundamental understanding the impact of confinement on transport and phase change processes. The book gives brief overviews of topics like thermodynamics, capillarity and fluid mechanics in order to launch the reader smoothly into the realm of porous media. In-depth discussions are given of phase change phenomena in porous media, single phase flow, unsaturated flow and multiphase flow. In order to make the topics concrete the book contains numerous example calculations. Further, as much experimental data as possible is plugged in to give the reader the ability to quantify phenomena.
Download or read book Advanced Reservoir Engineering written by Tarek Ahmed and published by Elsevier. This book was released on 2011-03-15 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Reservoir Engineering offers the practicing engineer and engineering student a full description, with worked examples, of all of the kinds of reservoir engineering topics that the engineer will use in day-to-day activities. In an industry where there is often a lack of information, this timely volume gives a comprehensive account of the physics of reservoir engineering, a thorough knowledge of which is essential in the petroleum industry for the efficient recovery of hydrocarbons.Chapter one deals exclusively with the theory and practice of transient flow analysis and offers a brief but thorough hands-on guide to gas and oil well testing. Chapter two documents water influx models and their practical applications in conducting comprehensive field studies, widely used throughout the industry. Later chapters include unconventional gas reservoirs and the classical adaptations of the material balance equation.* An essential tool for the petroleum and reservoir engineer, offering information not available anywhere else* Introduces the reader to cutting-edge new developments in Type-Curve Analysis, unconventional gas reservoirs, and gas hydrates * Written by two of the industry's best-known and respected reservoir engineers
Download or read book Multiphase Fluid Flow in Porous and Fractured Reservoirs written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2015-09-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase Fluid Flow in Porous and Fractured Reservoirs discusses the process of modeling fluid flow in petroleum and natural gas reservoirs, a practice that has become increasingly complex thanks to multiple fractures in horizontal drilling and the discovery of more unconventional reservoirs and resources. The book updates the reservoir engineer of today with the latest developments in reservoir simulation by combining a powerhouse of theory, analytical, and numerical methods to create stronger verification and validation modeling methods, ultimately improving recovery in stagnant and complex reservoirs. Going beyond the standard topics in past literature, coverage includes well treatment, Non-Newtonian fluids and rheological models, multiphase fluid coupled with geomechanics in reservoirs, and modeling applications for unconventional petroleum resources. The book equips today's reservoir engineer and modeler with the most relevant tools and knowledge to establish and solidify stronger oil and gas recovery. - Delivers updates on recent developments in reservoir simulation such as modeling approaches for multiphase flow simulation of fractured media and unconventional reservoirs - Explains analytical solutions and approaches as well as applications to modeling verification for today's reservoir problems, such as evaluating saturation and pressure profiles and recovery factors or displacement efficiency - Utilize practical codes and programs featured from online companion website
Download or read book Reservoir Engineering written by Sylvester Okotie and published by Springer. This book was released on 2018-11-22 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a clear and basic understanding of the concept of reservoir engineering to professionals and students in the oil and gas industry. The content contains detailed explanations of key theoretic and mathematical concepts and provides readers with the logical ability to approach the various challenges encountered in daily reservoir/field operations for effective reservoir management. Chapters are fully illustrated and contain numerous calculations involving the estimation of hydrocarbon volume in-place, current and abandonment reserves, aquifer models and properties for a particular reservoir/field, the type of energy in the system and evaluation of the strength of the aquifer if present. The book is written in oil field units with detailed solved examples and exercises to enhance practical application. It is useful as a professional reference and for students who are taking applied and advanced reservoir engineering courses in reservoir simulation, enhanced oil recovery and well test analysis.
