Download or read book Steady State Methods for Simulating Analog and Microwave Circuits written by Kenneth S. Kundert and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The motivation for starting the work described in this book was the interest that Hewlett-Packard's microwave circuit designers had in simulation techniques that could tackle the problem of finding steady state solutions for nonlinear circuits, particularly circuits containing distributed elements such as transmission lines. Examining the problem of computing steady-state solutions in this context has led to a collection of novel numerical algorithms which we have gathered, along with some background material, into this book. Although we wished to appeal to as broad an audience as possible, to treat the subject in depth required maintaining a narrow focus. Our compromise was to assume that the reader is familiar with basic numerical methods, such as might be found in [dahlquist74] or [vlach83], but not assume any specialized knowledge of methods for steady-state problems. Although we focus on algorithms for computing steady-state solutions of analog and microwave circuits, the methods herein are general in nature and may find use in other disciplines. A number of new algorithms are presented, the contributions primarily centering around new approaches to harmonic balance and mixed frequency-time methods. These methods are described, along with appropriate background material, in what we hope is a reasonably satisfying blend of theory, practice, and results. The theory is given so that the algorithms can be fully understood and their correctness established.

Download or read book Steady State Methods for Simulating Analog and Microwave Circuits written by Kenneth S. Kundert and published by . This book was released on 2014-01-15 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steady State Methods for Simulating Analog Circuits written by Kenneth Scott Kundert and published by . This book was released on 1989 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Circuit Simulation and Modeling written by José Carlos Pedro and published by Cambridge University Press. This book was released on 2018-06-14 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, tutorial guide to the nonlinear methods and techniques needed to design real-world microwave circuits.

Download or read book Silicon and Beyond written by Michael Shur and published by World Scientific. This book was released on 2000 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The steady downscaling of device-feature size combined with a rapid increase in circuit complexity as well as the introduction of new device concepts based on non-silicon-material systems poses great challenges for device and circuit designers. One of the major tasks is the development of new and improved device models needed for accurate device and circuit design. Another task is the development of new circuit-simulation tools to handle very large and complex circuits. This book addresses both these issues with up-to-date reviews written by leading experts in the field. The first three chapters of the book discuss advanced device models both for existing technologies and for new, emerging technologies. Among the topics covered are models for MOSFETs, thin-film transitors (TFTs), and compound semiconductor devices, including GaAs HEMTs and HFETs, heterodimensional devices, quantum-tunneling devices, as well as wide-bandgap devices. Chapters 4 and 5 discuss advanced circuit simulators that hold promise for,handling circuits of much higher complexity than what is possible for typical state-of-the-art circuit simulators today.

Download or read book Microwave Wireless Communications written by Antonio Raffo and published by Academic Press. This book was released on 2016-03-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: To design and develop fast and effective microwave wireless systems today involves addressing the three different ‘levels’: Device, circuit, and system. This book presents the links and interactions between the three different levels rather than providing just a comprehensive coverage of one specific level. With the aim of overcoming the sectional knowledge of microwave engineers, this will be the first book focused on explaining how the three different levels interact by taking the reader on a journey through the different levels going from the theoretical background to the practical applications. Explains the links and interactions between the three different design levels of wireless communication transmitters: device, circuit, and system Presents state-of-the-art, challenges, and future trends in the field of wireless communication systems Covers all aspects of both mature and cutting-edge technologies for semiconductor devices for wireless communication applications Many circuit designs outlining the limitations derived from the available transistor technologies and system requirements Explains how new microwave measurement techniques can represent an essential tool for microwave modellers and designers

Download or read book Mixed Mode Simulation and Analog Multilevel Simulation written by Resve A. Saleh and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed-Mode Simulation and Analog Multilevel Simulation addresses the problems of simulating entire mixed analog/digital systems in the time-domain. A complete hierarchy of modeling and simulation methods for analog and digital circuits is described. Mixed-Mode Simulation and Analog Multilevel Simulation also provides a chronology of the research in the field of mixed-mode simulation and analog multilevel simulation over the last ten to fifteen years. In addition, it provides enough information to the reader so that a prototype mixed-mode simulator could be developed using the algorithms in this book. Mixed-Mode Simulation and Analog Multilevel Simulation can also be used as documentation for the SPLICE family of mixed-mode programs as they are based on the algorithms and techniques described in this book.

Download or read book Low Power Design Techniques and CAD Tools for Analog and RF Integrated Circuits written by Piet Wambacq and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides an overview of the current state of the art and very recent research results that have been achieved as part of the Low-Power Initiative of the European Union, in the field of analogue, RF and mixed-signal design methodologies and CAD tools.

Download or read book Computer Aided Design of Analog Integrated Circuits and Systems written by Rob A. Rutenbar and published by John Wiley & Sons. This book was released on 2002-05-06 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.

Download or read book A Top Down Constraint Driven Design Methodology for Analog Integrated Circuits written by Henry Chang and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog circuit design is often the bottleneck when designing mixed analog-digital systems. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits presents a new methodology based on a top-down, constraint-driven design paradigm that provides a solution to this problem. This methodology has two principal advantages: (1) it provides a high probability for the first silicon which meets all specifications, and (2) it shortens the design cycle. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits is part of an ongoing research effort at the University of California at Berkeley in the Electrical Engineering and Computer Sciences Department. Many faculty and students, past and present, are working on this design methodology and its supporting tools. The principal goals are: (1) developing the design methodology, (2) developing and applying new tools, and (3) `proving' the methodology by undertaking `industrial strength' design examples. The work presented here is neither a beginning nor an end in the development of a complete top-down, constraint-driven design methodology, but rather a step in its development. This work is divided into three parts. Chapter 2 presents the design methodology along with foundation material. Chapters 3-8 describe supporting concepts for the methodology, from behavioral simulation and modeling to circuit module generators. Finally, Chapters 9-11 illustrate the methodology in detail by presenting the entire design cycle through three large-scale examples. These include the design of a current source D/A converter, a Sigma-Delta A/D converter, and a video driver system. Chapter 12 presents conclusions and current research topics. A Top-Down, Constraint-Driven Design Methodology for Analog Integrated Circuits will be of interest to analog and mixed-signal designers as well as CAD tool developers.

Download or read book Modeling and Simulation in Engineering Sciences written by Noreen Sher Akbar and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features state-of-the-art contributions in mathematical, experimental and numerical simulations in engineering sciences. The contributions in this book, which comprise twelve chapters, are organized in six sections spanning mechanical, aerospace, electrical, electronic, computer, materials, geotechnical and chemical engineering. Topics include metal micro-forming, compressible reactive flows, radio frequency circuits, barrier infrared detectors, fiber Bragg and long-period fiber gratings, semiconductor modelling, many-core architecture computers, laser processing of materials, alloy phase decomposition, nanofluids, geo-materials and rheo-kinetics. Contributors are from Europe, China, Mexico, Malaysia and Iran. The chapters feature many sophisticated approaches including Monte Carlo simulation, FLUENT and ABAQUS computational modelling, discrete element modelling and partitioned frequency-time methods. The book will be of interest to researchers and also consultants engaged in many areas of engineering simulation.

Download or read book Advances in Cognitive Radio Systems written by Cheng-Xiang Wang and published by BoD – Books on Demand. This book was released on 2012-07-05 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cognitive radio technologies are forms of wireless communication with many and varied applications. The contributions in this book will benefit researchers and engineers as they offer cutting-edge knowledge in the field. Subjects include uses of wideband voltage controlled oscillators, control planes for spectrum access and mobility in networks with heterogeneous frequency devices. Other chapters cover cognitive media access control and measurement methods for spectrum occupancy. In addition, there are contributions on delay analysis and channel selection in single-hop networks for delay-sensitive applications, the application of transmission security (TRANSEC) protocols to cognitive radio communication and the use of blind detection, parameters, estimation and the despreading of DS-CDMA signals in multirate, multiuser cognitive radio systems.

Download or read book Nonlinear Microwave Circuit Design written by Franco Giannini and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design techniques for nonlinear microwave circuits are much less developed than for linear microwave circuits. Until now there has been no up-to-date text available in this area. Current titles in this field are considered outdated and tend to focus on analysis, failing to adequately address design and measurement aspects. Giannini and Leuzzi provide the theoretical background to non-linear microwave circuits before going on to discuss the practical design and measurement of non-linear circuits and components. Non-linear Microwave Circuit Design reviews all of the established analysis and characterisation techniques available and provides detailed coverage of key modelling methods. Practical examples are used throughout the text to emphasise the design and application focus of the book. Provides a unique, design-focused, coverage of non-linear microwave circuits Covers the fundamental properties of nonlinear circuits and methods for device modelling Outlines non-linear measurement techniques and characterisation of active devices Reviews available design methodologies for non-linear power amplifiers and details advanced software modelling tools Provides the first detailed treatment of non-linear frequency multipliers, mixers and oscillators Focuses on the application potential of non-linear components Practicing engineers and circuit designers working in microwave and communications engineering and designing new applications, as well as senior undergraduates, graduate students and researchers in microwave and communications engineering and their libraries will find this a highly rewarding read.

Download or read book Numerical Simulations in Engineering and Science written by Srinivasa Rao and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational science is one of the rapidly growing multidisciplinary fields. The high-performance computing capabilities are utilized to solve and understand complex problems. This book offers a detailed exposition of the numerical methods that are used in engineering and science. The chapters are arranged in such a way that the readers will be able to select the topics appropriate to their interest and need. The text features a broad array of applications of computational methods to science and technology. This book would be an interesting supplement for the practicing engineers, scientists, and graduate students.

Download or read book Analog Circuit Design written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the extended and revised editions of all the talks of the ninth AACD Workshop held in Hotel Bachmair, April 11 - 13 2000 in Rottach-Egem, Germany. The local organization was managed by Rudolf Koch of Infineon Technologies AG, Munich, Germany. The program consisted of six tutorials per day during three days. Experts in the field presented these tutorials and state of the art information is communicated. The audience at the end of the workshop selects program topics for the following workshop. The program committee, consisting of Johan Huijsing of Delft University of Technology, Willy Sansen of Katholieke Universiteit Leuven and Rudy van de Plassche of Broadcom Netherlands BV Bunnik elaborates the selected topics into a three-day program and selects experts in the field for presentation. Each AACD Workshop has given rise to publication of a book by Kluwer entitled "Analog Circuit Design". A series of nine books in a row provides valuable information and good overviews of all analog circuit techniques concerning design, CAD, simulation and device modeling. These books can be seen as a reference to those people involved in analog and mixed signal design. The aim of the workshop is to brainstorm on new and valuable design ideas in the area of analog circuit design. It is the hope of the program committee that this ninth book continues the tradition of emerging contributions to the design of analog and mixed signal systems in Europe and the rest of the world.

Download or read book Analog Circuit Design written by Arthur H.M. van Roermund and published by Springer Science & Business Media. This book was released on 2003-10-31 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Number 12 in the successful series of Analog Circuit Design provides valuable information and excellent overviews of analogue circuit design, CAD and RF systems. The series is an ideal reference for those involved in analogue and mixed-signal design.

Download or read book High Level Modeling and Synthesis of Analog Integrated Systems written by Ewout S. J. Martens and published by Springer Science & Business Media. This book was released on 2008-01-03 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various approaches for finding optimal values for the parameters of analog cells have made their entrance in commercial applications. However, a larger impact on the performance is expected if tools are developed which operate on a higher abstraction level and consider multiple architectural choices to realize a particular functionality. This book examines the opportunities, conditions, problems, solutions and systematic methodologies for this new generation of analog CAD tools.