Download or read book Steady State and Transient Liquid Gas Pipe Flow Models written by Olusola Oloruntoba and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas liquid Transient Flow in Horizontal Pipes written by and published by . This book was released on 1977 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent studies (Taitel and Dukler, 1976) have provided a method for predicting conditions for flow regime transitions by modelling the actual physical processes taking place. This work was concerned only with steady flow conditions. Of considerable importance to the analysis of a Loss of Cooling Accident is the ability to predict the flow regime under conditions of transient flow. This report extends the steady state method of analysis to that of transient flow. It is shown that under transient conditions the transitions between flow patterns can occur at flow rates different than that which will take place if the changes in flow rate were to take place infinitely slowly. Furthermore, for rapid changes in flow rates from one set of conditions to another, flow regimes can appear which would not be observed if the change were made slowly. The theory for flow regime changes under transient flow conditions is developed and methods for predicting the onset of transition under transients presented. Experimental confirmation of the theory is described.
Download or read book Thermodynamics written by Juan Carlos Moreno Piraján and published by BoD – Books on Demand. This book was released on 2011-09-22 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermodynamics is one of the most exciting branches of physical chemistry which has greatly contributed to the modern science. Being concentrated on a wide range of applications of thermodynamics, this book gathers a series of contributions by the finest scientists in the world, gathered in an orderly manner. It can be used in post-graduate courses for students and as a reference book, as it is written in a language pleasing to the reader. It can also serve as a reference material for researchers to whom the thermodynamics is one of the area of interest.
Download or read book Handbook of Natural Gas Transmission and Processing written by Saeid Mokhatab and published by Gulf Professional Publishing. This book was released on 2012-07-02 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique, well-documented, and forward-thinking work, the second edition of Handbook of Natural Gas Transmission and Processing continues to present a thoroughly updated, authoritative, and comprehensive description of all major aspects of natural gas transmission and processing. It provides an ideal platform for engineers, technologists, and operations personnel working in the natural gas industry to get a better understanding of any special requirements for optimal design and operations of natural gas transmission pipelines and processing plants. First book of its kind that covers all aspects of natural gas transmission and processing Provides pivotal updates on the latest technologies, which have not been addressed in-depth in any existing books Offers practical advice for design and operation based on sound engineering principles and established techniques Examines ways to select the best processing route for optimal design of gas-processing plants Contains new discussions on process modeling, control, and optimization in gas processing industry
Download or read book One dimensional Compositional Modeling of Gas and Condensate Flow in Pipelines written by Leksono Mucharam and published by . This book was released on 1990 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Two Phase Gas Liquid Flow in Pipes with Different Orientations written by Afshin J. Ghajar and published by Springer Nature. This book was released on 2020-03-14 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides design engineers using gas-liquid two-phase flow in different industrial applications the necessary fundamental understanding of the two-phase flow variables. Two-phase flow literature reports a plethora of correlations for determination of flow patterns, void fraction, two- phase pressure drop and non-boiling heat transfer correlations. However, the validity of a majority of these correlations is restricted over a narrow range of two -phase flow conditions. Consequently, it is quite a challenging task for the end user to select an appropriate correlation/model for the type of two-phase flow under consideration. Selection of a correct correlation also requires some fundamental understanding of the two-phase flow physics and the underlying principles/assumptions/limitations associated with these correlations. Thus, it is of significant interest for a design engineer to have knowledge of the flow patterns and their transitions and their influence on two-phase flow variables. To address some of these issues and facilitate selection of appropriate two-phase flow models, this volume presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommend some of the well scrutinized modeling techniques.
Download or read book Handbook of Pipeline Engineering written by ABCM – Brazilian Society of Mechanical Sciences and Engineering and published by Springer Nature. This book was released on with total page 1700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book One Dimensional Transient Flow in Pipelines Modelling and Simulation written by Abdelaziz Ghodhbani and published by Bentham Science Publishers. This book was released on 2023-10-03 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents numerical computational fluid dynamics (CFD) solutions for studying the effect of fluid-structure interaction (FSI) on evaluation of pressure waves in pipelines with cavitation. The authors develop a uniform one-dimensional model using coupled models. These models consider unsteady friction (UF), Poisson coupling, axial vibration (junction coupling), gas release and viscoelasticity. The authors consider two cases: elastic pipelines and viscoelastic (VE) pipelines. The book starts with a detailed literature review on the relevant methods for calculating transient fluid flow, followed by chapters that explain the mathematical development for calculations and the numerical steps for water hammer and transient cavitation. The concluding chapters present the results for the two pipeline cases. The book is presented in simple language intended for engineering students who want to understand CFD simulations for transient flow in pipelines. Equations are explained in simple steps for easy understanding, and concepts are illustrated with detailed diagrams. The information and the codes demonstrated in the book will equip readers with the knowledge to study hydraulic problems where transients are caused by pump starting, stopping and failure. Audience Engineering students and instructors studying hydraulics and computational fluid dynamics.
Download or read book Pipeline Engineering 1993 written by Brian Williams and published by . This book was released on 1993 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Transport of Hydrocarbons in Pipes written by Juan J. Manzano-Ruiz and published by John Wiley & Sons. This book was released on 2024-04-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to multiphase flows in the oil and gas industry The term ‘multiphase flow’ refers to the concurrent flow of oil and/or gas, alongside other substances or materials such as production water, chemical inhibitors, and solids (e.g. sand). This is a critical topic in the oil and gas industry, where the presence of multiple flow phases in pipelines affects deliverability, generates serious complications in predicting flow performance for system design and operation, and requires specific risk mitigation actions and continuous maintenance. Chemical and Mechanical Engineers interested in working in this industry will benefit from understanding the basic theories and practices required to model and operate multiphase flows through pipelines, wells, and other components of the production system. Multiphase Transport of Hydrocarbons in Pipes meets this need with a comprehensive overview of five decades of research into multiphase flow. Incorporating fundamental theories, historic and cutting-edge multiphase flow models, and concrete examples of current and future applications. This book provides a sound technical background for prospective or working engineers in need of understanding this crucial area of industry. Readers will also find: Flowcharts to illustrate calculation sequences Detailed tools for estimating multiphase flow rates through flowlines, wells, and more Integration of conservation principles with thermodynamic and transport properties Coverage of legacy and modern simulation models This book is ideal for flow assurance engineers, facilities engineers, oil and gas production engineers, and process engineers, as well as chemical and mechanical engineering students looking to work in any of these roles.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pipeline Inspection and Health Monitoring Technology written by Hongfang Lu and published by Springer Nature. This book was released on 2023-01-03 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes six chapters aiming to introduce global pipeline inspection and health monitoring technologies comprehensively. The pipeline is the blood vessel of the energy system and a vital lifeline project. After many years of service, the pipeline gradually enters the aging stage. Pipeline inspection and health monitoring can effectively reduce the failure and accident risks of the pipeline, and it is conducive to integrity management. Through case analysis, practitioners can have a deeper understanding of the application of related technologies.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1981 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Tech Briefs written by and published by . This book was released on 1986 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Code of Federal Regulations of the United States of America written by and published by . This book was released on 2001 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Code of Federal Regulations is the codification of the general and permanent rules published in the Federal Register by the executive departments and agencies of the Federal Government.
Download or read book Code of Federal Regulations written by and published by . This book was released on 2002 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special edition of the Federal Register, containing a codification of documents of general applicability and future effect ... with ancillaries.
Download or read book Advanced Transport Phenomena written by P. A. Ramachandran and published by Cambridge University Press. This book was released on 2014-09-25 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated, modern approach to transport phenomena for graduate students, featuring examples and computational solutions to develop practical problem-solving skills.
