Download or read book Stator and Rotor Flux Based Deadbeat Direct Torque Control of Induction Machines Revision 1 written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-19 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new, deadbeat type of direct torque control is proposed, analyzed, and experimentally verified in this paper. The control is based on stator and rotor flux as state variables. This choice of state variables allows a graphical representation which is transparent and insightful. The graphical solution shows the effects of realistic considerations such as voltage and current limits. A position and speed sensorless implementation of the control, based on the self-sensing signal injection technique, is also demonstrated experimentally for low speed operation. The paper first develops the new, deadbeat DTC methodology and graphical representation of the new algorithm. It then evaluates feasibility via simulation and experimentally demonstrates performance of the new method with a laboratory prototype including the sensorless methods. Kenny, Barbara H. and Lorenz, Robert D. Glenn Research Center NASA/TM-2001-211100/REV1, NAS 1.15:211100/REV1, E-12945-1/REV1

Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2004 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Induction Motors written by Andrzej Trzynadlowski and published by Academic Press. This book was released on 2001 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reference source for practising engineers specializing in electric power engineering and industrial electronics. It begins with the basic dynamic models of induction motors and progresses to low- and high-performance drive systems.

Download or read book Sensorless Vector and Direct Torque Control written by Peter Vas and published by Oxford, [Eng.] ; New York : Oxford University Press. This book was released on 1998 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book on sensorless high performance a.c. drives. It is essential reading for anyone interestred in acquiring a solid background on sensorless torque-controlled drives. It presents a detailed and unified treatment of sensorless vector-controlled and direct-torque controlled drive systems. It also discusses the applications of artificial intelligence to drives. Where possible, space vector theory is used and emphasis is laid on detailed mathematical and physical analysis. Sensorless drive schemes for different types of permanent magnet synchronous motors, synchronous reluctance motors, and induction motors are also presented. These include more than twenty vector drives e.g. five types of MRAS-based vector drives, and eleven types of direct-torque-controlled (DTC) drives, e.g. the ABB DTC drive. However, torque-controlled switched reluctance motor drives are also discussed due to their emerging importance. The book also covers various drive applications using artificial intelligence (fuzzy logic, neural networks, fuzzy-neural networks) and AI-based modelling of electrical machines. Finally, self-commissioning techniques are also discussed. This is a comprehensive thoroughly up-to-date, and self-contained book suitable for students at various levels, teachers, and industrial readership. Peter Vas is a Professor at the Department of Engineering at the University of Aberdeen, UK, where he is also the Head of the Intelligent Motion Control Group. His previous books published by Oxford University Press are extensively used worldwide.

Download or read book Passivity based Control of Euler Lagrange Systems written by Romeo Ortega and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essence of this work is the control of electromechanical systems, such as manipulators, electric machines, and power converters. The common thread that links together the results presented here is the passivity property, which is at present in numerous electrical and mechanical systems, and which has great relevance in control engineering at this time. Amongst other topics, the authors cover: Euler-Lagrange Systems, Mechanical Systems, Generalised AC Motors, Induction Motor Control, Robots with AC Drives, and Perspectives and Open Problems. The authors have extensive experience of research and application in the field of control of electromechanical systems, which they have summarised here in this self-contained volume. While written in a strictly mathematical way, it is also elementary, and will be accessible to a wide-ranging audience, including graduate students as well as practitioners and researchers in this field.

Download or read book Vector Control of AC Drives written by Ion Boldea and published by CRC Press. This book was released on 1992-08-26 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternating current (AC) induction and synchronous machines are frequently used in variable speed drives with applications ranging from computer peripherals, robotics, and machine tools to railway traction, ship propulsion, and rolling mills. The notable impact of vector control of AC drives on most traditional and new technologies, the multitude of practical configurations proposed, and the absence of books treating this subject as a whole with a unified approach were the driving forces behind the creation of this book. Vector Control of AC Drives examines the remarkable progress achieved worldwide in vector control from its introduction in 1969 to the current technology. The book unifies the treatment of vector control of induction and synchronous motor drives using the concepts of general flux orientation and the feed-forward (indirect) and feedback (direct) voltage and current vector control. The concept of torque vector control is also introduced and applied to all AC motors. AC models for drive applications developed in complex variables (space phasors), both for induction and synchronous motors, are used throughout the book. Numerous practical implementations of vector control are described in considerable detail, followed by representative digital simulations and test results taken from the recent literature. Vector Control of AC Drives will be a welcome addition to the reference collections of electrical and mechanical engineers involved with machine and system design.

Download or read book Deadbeat Direct Torque Flux Control for Interior Permanent Magnet Synchronous Machines written by Jae Suk Lee and published by . This book was released on 2009 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Electric Machinery and Drive Systems written by Paul C. Krause and published by John Wiley & Sons. This book was released on 2013-06-17 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a new edition of the popular reference on machine analysis Now in a fully revised and expanded edition, this widely used reference on machine analysis boasts many changes designed to address the varied needs of engineers in the electric machinery, electric drives, and electric power industries. The authors draw on their own extensive research efforts, bringing all topics up to date and outlining a variety of new approaches they have developed over the past decade. Focusing on reference frame theory that has been at the core of this work since the first edition, this volume goes a step further, introducing new material relevant to machine design along with numerous techniques for making the derivation of equations more direct and easy to use. Coverage includes: Completely new chapters on winding functions and machine design that add a significant dimension not found in any other text A new formulation of machine equations for improving analysis and modeling of machines coupled to power electronic circuits Simplified techniques throughout, from the derivation of torque equations and synchronous machine analysis to the analysis of unbalanced operation A unique generalized approach to machine parameters identification A first-rate resource for engineers wishing to master cutting-edge techniques for machine analysis, Analysis of Electric Machinery and Drive Systems is also a highly useful guide for students in the field.

Download or read book PID and Predictive Control of Electrical Drives and Power Converters using MATLAB Simulink written by Liuping Wang and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice. The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis. The book contains sections on closed-loop performance analysis in both frequency domain and time domain, presented to help the designer in selection of controller parameters and validation of the control system. Continuous-time model predictive control systems are designed for the drives and power supplies, and operational constraints are imposed in the design. Discrete-time model predictive control systems are designed based on the discretization of the physical models, which will appeal to readers who are more familiar with sampled-data control system. Soft sensors and observers will be discussed for low cost implementation. Resonant control of the electric drives and power supply will be discussed to deal with the problems of bias in sensors and unbalanced three phase AC currents. Brings together both classical control systems and predictive control systems in a logical style from introductory through to advanced levels Demonstrates how simulation and experimental results are used to support theoretical analysis and the proposed design algorithms MATLAB and Simulink tutorials are given in each chapter to show the readers how to take the theory to applications. Includes MATLAB and Simulink software using xPC Target for teaching purposes A companion website is available Researchers and industrial engineers; and graduate students on electrical engineering courses will find this a valuable resource.

Download or read book Loss Manipulation Using Deadbeat Direct Torque Flux Control for Induction Machines written by James M. Burton and published by . This book was released on 2009 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Direct Torque Control Strategies of Electrical Machines written by Fatma Ben Salem and published by BoD – Books on Demand. This book was released on 2021-01-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the design and analysis of Direct Torque Control (DTC). It introduces readers to two major applications of electrical machines: speed drive and position control and gives the readers a comprehensive overview of the field of DTC dedicated to AC machines. It includes new DTC approaches with and without control of commutation frequency. It also covers DTC applications using artificial intelligence. The book combines theoretical analysis, simulation, and experimental concepts.To make the content as accessible as possible, the book employs a clear proposal in each chapter, moving from the background, to numerical development, and finally to case studies and illustrations. The book is a wide-ranging reference source for graduate students, researchers, and professors from related fields and it will benefit practicing engineers and experts from the industry.

Download or read book Effective Real Time Implementation of Deadbeat Direct Torque Control for AC Induction Machines written by Nathan T. West and published by . This book was released on 2006 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Power Electronics written by Frede Blaabjerg and published by MDPI. This book was released on 2019-06-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ‎robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ‎smart control of power electronics in devices, microgrids, and at system levels.

Download or read book Model Predictive Control of Wind Energy Conversion Systems written by Venkata Yaramasu and published by John Wiley & Sons. This book was released on 2016-12-19 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control of Wind Energy Conversion Systems addresses the predicative control strategy that has emerged as a promising digital control tool within the field of power electronics, variable-speed motor drives, and energy conversion systems. The authors provide a comprehensive analysis on the model predictive control of power converters employed in a wide variety of variable-speed wind energy conversion systems (WECS). The contents of this book includes an overview of wind energy system configurations, power converters for variable-speed WECS, digital control techniques, MPC, modeling of power converters and wind generators for MPC design. Other topics include the mapping of continuous-time models to discrete-time models by various exact, approximate, and quasi-exact discretization methods, modeling and control of wind turbine grid-side two-level and multilevel voltage source converters. The authors also focus on the MPC of several power converter configurations for full variable-speed permanent magnet synchronous generator based WECS, squirrel-cage induction generator based WECS, and semi-variable-speed doubly fed induction generator based WECS. Furthermore, this book: Analyzes a wide variety of practical WECS, illustrating important concepts with case studies, simulations, and experimental results Provides a step-by-step design procedure for the development of predictive control schemes for various WECS configurations Describes continuous- and discrete-time modeling of wind generators and power converters, weighting factor selection, discretization methods, and extrapolation techniques Presents useful material for other power electronic applications such as variable-speed motor drives, power quality conditioners, electric vehicles, photovoltaic energy systems, distributed generation, and high-voltage direct current transmission. Explores S-Function Builder programming in MATLAB environment to implement various MPC strategies through the companion website Reflecting the latest technologies in the field, Model Predictive Control of Wind Energy Conversion Systems is a valuable reference for academic researchers, practicing engineers, and other professionals. It can also be used as a textbook for graduate-level and advanced undergraduate courses.

Download or read book Predictive Control of Power Converters and Electrical Drives written by Jose Rodriguez and published by Wiley-IEEE Press. This book was released on 2012-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the general principles and current research into Model Predictive Control (MPC); the most up-to-date control method for power converters and drives The book starts with an introduction to the subject before the first chapter on classical control methods for power converters and drives. This covers classical converter control methods and classical electrical drives control methods. The next chapter on Model predictive control first looks at predictive control methods for power converters and drives and presents the basic principles of MPC. It then looks at MPC for power electronics and drives. The third chapter is on predictive control applied to power converters. It discusses: control of a three-phase inverter; control of a neutral point clamped inverter; control of an active front end rectifier, and; control of a matrix converter. In the middle of the book there is Chapter four - Predictive control applied to motor drives. This section analyses predictive torque control of industrial machines and predictive control of permanent magnet synchronous motors. Design and implementation issues of model predictive control is the subject of the final chapter. The following topics are described in detail: cost function selection; weighting factors design; delay compensation; effect of model errors, and prediction of future references. While there are hundreds of books teaching control of electrical energy using pulse width modulation, this will be the very first book published in this new topic. Unique in presenting a completely new theoretic solution to control electric power in a simple way Discusses the application of predictive control in motor drives, with several examples and case studies Matlab is included on a complementary website so the reader can run their own simulations

Download or read book Recent Developments of Electrical Drives written by Slawomir Wiak and published by Springer Science & Business Media. This book was released on 2007-06-08 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers covering a wide spectrum of theory and practice, deeply rooted in engineering problems at a high practical and theoretical level. The contents explore theory, control systems and applications, the heart of the matter in electrical drives.

Download or read book Control in Power Electronics written by Marian P. Kazmierkowski and published by Elsevier. This book was released on 2002-08-30 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors were originally brought together to share research and applications through the international Danfoss Professor Programme at Aalborg University in Denmark. Personal computers would be unwieldy and inefficient without power electronic dc supplies. Portable communication devices and computers would also be impractical. High-performance lighting systems, motor controls, and a wide range of industrial controls depend on power electronics. In the near future we can expect strong growth in automotive applications, dc power supplies for communication systems, portable applications, and high-end converters. We are approaching a time when all electrical energy will be processed and controlled through power electronics somewhere in the path from generation to end use. - The most up-to-date information available is presented in the text - Written by a world renowned leader in the field