Download or read book A Unified Statistical Methodology for Modeling Fatigue Damage written by Enrique Castillo and published by Springer Science & Business Media. This book was released on 2009-02-27 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to provide a uni?ed methodology to derive models for fatigue life. This includes S-N, ?-N and crack propagation models. This is not a conventional book aimed at describing the fatigue fundamentals, but rather a book in which the basic models of the three main fatigue approaches, the stress-based, the strain-based and the fracture mechanics approaches, are contemplated from a novel and integrated point of view. On the other hand, as an alternative to the preferential attention paid to deterministic models based on the physical, phenomenological and empirical description of fatigue, their probabilistic nature is emphasized in this book, in which stochastic fatigue and crack growth models are presented. This book is the result of a long period of close collaborationbetween its two authors who, although of di?erent backgrounds, mathematical and mechanical, both have a strong sense of engineering with respect to the fatigue problem. When the authors of this book ?rst approached the fatigue ?eld in 1982 (twenty six years ago), they found the following scenario: 1. Linear, bilinear or trilinear models were frequently proposed by relevant laboratoriesandacademiccenterstoreproducetheW ̈ ohler?eld. Thiswas the case of well known institutions, which justi?ed these models based on clientrequirementsorpreferences. Thisledtotheinclusionofsuchmodels and methods as, for example, the up-and-down, in standards and o?cial practical directives (ASTM, Euronorm, etc.), which have proved to be unfortunate.
Download or read book Statistical Research on Fatigue and Fracture written by Tsuneshichi Tanaka and published by Elsevier Science & Technology. This book was released on 1987 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Topics in Fracture and Fatigue written by A.S. Argon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture in structural materials remains a vital consideration in engineering systems, affecting the reliability of machines throughout their lives. Impressive advances in both the theoretical understanding of fracture mechanisms and practical developments that offer possibilities of control have re-shaped the subject over the past four decades. The contributors to this volume, including some of the most prominent researchers in the field, give their long-range perspectives of the research on the fracture of solids and its achievements. The subjects covered in this volume include: statistics of brittle fracture, transition of fracture from brittle to ductile, mechanics and mechanisms of ductile separation of heterogenous solids, the crack tip environment in ductile fracture, and mechanisms and mechanics of fatigue. Materials considered range from the usual structural solids to composites. The chapters include both theoretical points of view and discussions of key experiments. Contributors include: from MIT, A.S. Argon, D.M. Parks; from Cambridge, M.F. Ashby; from U.C. Santa Barbara, A.G. Evans, R. McMeeking; from Glasgow, J. Hancock; from Harvard, J.W. Hutchinson, J.R. Rice; from Sheffield, K.J. Miller; from Brown, A. Needleman; from the Ecole des Mines, A. Pineau; from U.C. Berkeley, R. O. Ritchie; and from Copenhagen, V. Tvergaard.
Download or read book Fatigue Testing and Analysis written by Yung-Li Lee and published by Elsevier. This book was released on 2011-04-18 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Testing and Analysis: Theory and Practice presents the latest, proven techniques for fatigue data acquisition, data analysis, and test planning and practice. More specifically, it covers the most comprehensive methods to capture the component load, to characterize the scatter of product fatigue resistance and loading, to perform the fatigue damage assessment of a product, and to develop an accelerated life test plan for reliability target demonstration. This book is most useful for test and design engineers in the ground vehicle industry. Fatigue Testing and Analysis introduces the methods to account for variability of loads and statistical fatigue properties that are useful for further probabilistic fatigue analysis. The text incorporates and demonstrates approaches that account for randomness of loading and materials, and covers the applications and demonstrations of both linear and double-linear damage rules. The reader will benefit from summaries of load transducer designs and data acquisition techniques, applications of both linear and non-linear damage rules and methods, and techniques to determine the statistical fatigue properties for the nominal stress-life and the local strain-life methods. - Covers the useful techniques for component load measurement and data acquisition, fatigue properties determination, fatigue analysis, and accelerated life test criteria development, and, most importantly, test plans for reliability demonstrations - Written from a practical point of view, based on the authors' industrial and academic experience in automotive engineering design - Extensive practical examples are used to illustrate the main concepts in all chapters
Download or read book Scaling written by G. I. Barenblatt and published by Cambridge University Press. This book was released on 2003-11-13 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author describes and teaches the art of discovering scaling laws, starting from dimensional analysis and physical similarity, which are here given a modern treatment. He demonstrates the concepts of intermediate asymptotics and the renormalisation group as natural consequences of self-similarity and shows how and when these notions and tools can be used to tackle the task at hand, and when they cannot. Based on courses taught to undergraduate and graduate students, the book can also be used for self-study by biologists, chemists, astronomers, engineers and geoscientists.
Download or read book Advances in Fracture Research written by Alberto Carpinteri and published by Springer. This book was released on 2006-07-28 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a spin-off from the International Journal of Fracture and collects lectures and papers presented at the 11th International Conference on Fracture (ICF11), March 20-25, 2005. Included in this volume are introductory addresses, as well as remarks on the presentation of honorary degrees. A collection of papers follows, including presentations by such eminent scientists as B.B. Mandelbrot, G.I. Barenblatt, and numerous others, reviewing advanced research in fracture.
Download or read book Fatigue and Fracture Mechanics of High Risk Parts written by Bahram Farahmand and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the preliminary stage of designing new structural hardware that must perform a given mission in a fluctuating load environment, there are several factors the designers should consider. Trade studies for different design configurations should be performed and, based on strength and weight considerations, among others, an optimum configuration selected. The selected design must be able to withstand the environment in question without failure. Therefore, a comprehen sive structural analysis that consists of static, dynamic, fatigue, and fracture is necessary to ensure the integrity of the structure. During the past few decades, fracture mechanics has become a necessary discipline for the solution of many structural problems. These problems include the prevention of failures resulting from preexisting cracks in the parent material, welds or that develop under cyclic loading environment during the life of the structure. The importance of fatigue and fracture in nuclear, pressure vessel, aircraft, and aerospace structural hardware cannot be overemphasized where safety is of utmost concern. This book is written for the designer and strength analyst, as well as for the material and process engineer who is concerned with the integrity of the structural hardware under load-varying environments in which fatigue and frac ture must be given special attention. The book is a result of years of both acade mic and industrial experiences that the principal author and co-authors have accumulated through their work with aircraft and aerospace structures.
Download or read book Flaws and Testing written by R. C. Bradt and published by Springer. This book was released on 1978-03-31 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes, 3 and 4, of Fracture Mechanics of Ceramics con stitute the proceedings of an international symposium on the frac ture mechanics of ceramics held at the Pennsylvania State Univer sity, University Park, PA on July 27, 28, and 29, 1977. Volumes 1 and 2 were published previously as the proceedings of a sympo sium of the same name held July 11, 12, and 13, 1973, also at Penn State. All four volumes published to date concentrate on the fracture aspects of the mechanical behavior of brittle ceramics in terms of the characteristics of cracks. The program chairmen gratefully acknowledge the financial as sistance for the symposium provided by the Office of Naval Re search, the Energy Research and Development Administration, and the Army Research Office. Without their support the quality and mag nitude of this conference simply would not have been possible. Numerous individuals contributed to the success of the con ference, but unfortunately they cannot all be listed here. However the program chairmen would especially like to recognize the contri butions of Penn State Conference Coordinator, Mr. Ronald Avillion, whose expertise in planning and organization was indispensable; Dr. Fred R. Matson for his interesting after dinner speech; and Drs. A. M. Diness, J. C. Hurt, and D. W. Readey for their en couragement and valuable suggestions regarding the program. Finally, we wish to also thank our joint secretaries for the patience and help in bringing these proceedings to press.
Download or read book Fracture and Fatigue Emanating from Stress Concentrators written by G. Pluvinage and published by Springer Science & Business Media. This book was released on 2003-12-31 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: A vast majority of failures emanate from stress concentrators such as geometrical discontinuities. The role of stress concentration was first highlighted by Inglis (1912) who gives a stress concentration factor for an elliptical defect, and later by Neuber (1936). With the progress in computing, it is now possible to compute the real stress distribution at a notch tip. This distribution is not simple, but looks like pseudo-singularity as in principle the power dependence with distance remains. This distribution is governed by the notch stress intensity factor which is the basis of Notch Fracture Mechanics. Notch Fracture Mechanics is associated with the volumetric method which postulates that fracture requires a physical volume. Since fatigue also needs a physical process volume, Notch Fracture Mechanics can easily be extended to fatigue emanating from a stress concentration.
Download or read book Fatigue and Corrosion in Metals written by Pietro Paolo Milella and published by Springer Nature. This book was released on with total page 965 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Research on the Strength and Fracture of Materials written by D.M.R. Taplin and published by Elsevier. This book was released on 2013-10-22 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Research on the Strength and Fracture of Materials: Volume 1s—An Overview contains the proceedings of the Fourth International Conference on Fracture held at the University of Waterloo, Canada, in June 1977. The papers review the state of the art with respect to fracture in a wide range of materials such as metals and alloys, polymers, ceramics, and composites. This volume is comprised of 40 chapters and opens with a discussion on progress in the development of elementary fracture mechanism maps and their application to metal deformation processes, along with micro-mechanisms of fracture and the fracture toughness of engineering alloys. The next section is devoted to the fracture of large-scale structures such as steel structures, aircraft, cargo containment systems, nuclear reactors, and pressure vessels. Fracture at high temperatures and in sensitive environments is then explored, paying particular attention to creep failure by cavitation under non-steady conditions; the effects of hydrogen and impurities on brittle fracture in steel; and mechanism of embrittlement and brittle fracture in liquid metal environments. The remaining chapters consider the fracture of non-metallic materials as well as developments and concepts in the application of fracture mechanics. This book will be of interest to metallurgists, materials scientists, and structural and mechanical engineers.
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1993 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASM Handbook written by ASM International. Handbook Committee and published by . This book was released on 1990 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes cover the properties, processing, and applications of metals and nonmetallic engineering materials. They are designed to provide the authoritative information and data necessary for the appropriate selection of materials to meet critical design and performance criteria.
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1977 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Behavior and Fracture of Engineering Materials written by Jorge Luis González-Velázquez and published by Springer Nature. This book was released on 2019-08-29 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theoretical concepts of stress and strain, as well as the strengthening and fracture mechanisms of engineering materials in an accessible level for non-expert readers, but without losing scientific rigor. This volume fills the gap between the specialized books on mechanical behavior, physical metallurgy and material science and engineering books on strength of materials, structural design and materials failure. Therefore it is intended for college students and practicing engineers that are learning for the first time the mechanical behavior and failure of engineering materials or wish to deepen their understanding on these topics. The book includes specific topics seldom covered in other books, such as: how to determine a state of stress, the relation between stress definition and mechanical design, or the theory behind the methods included in industrial standards to assess defects or to determine fatigue life. The emphasis is put into the link between scientific knowledge and practical applications, including solved problems of the main topics, such as stress and strain calculation. Mohr's Circle, yield criteria, fracture mechanics, fatigue and creep life prediction. The volume covers both the original findings in the field of mechanical behavior of engineering materials, and the most recent and widely accepted theories and techniques applied to this topic. At the beginning of some selected topics that by the author's judgement are transcendental for this field of study, the prime references are given, as well as a brief biographical semblance of those who were the pioneers or original contributors. Finally, the intention of this book is to be a textbook for undergraduate and graduate courses on Mechanical Behavior, Mechanical Metallurgy and Materials Science, as well as a consulting and/or training material for practicing engineers in industry that deal with mechanical design, materials selection, material processing, structural integrity assessment, and for researchers that incursion for the first time in the topics covered in this book.
