Download or read book Statistical Energy Analysis for Determination of Vibration Propagation and Sound Radiation from Noise Sources written by Anders Ågren and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prediction of Sound and Vibration Response Using Transient Statistical Energy Analysis written by Matthew Robinson and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Transient sounds generated from structure-borne and airborne excitation are very common in buildings and cause the majority of disturbances in dwellings. The maximum sound pressure level corresponds well with annoyance and disturbance and current guidelines use this descriptor to describe the threshold for sleep disturbance. Hence this thesis addresses a need for methods to quantify transient sound sources and prediction models that can determine maximum sound pressure levels due to these sound sources. Statistical Energy Analysis (SEA) provides a framework that describes sound radiation and structure-borne sound transmission in buildings. SEA is used in this thesis as a basis on which to develop Transient Statistical Energy Analysis (TSEA) for building acoustics. The TSEA power balance describes energy exchange between subsystems in the time domain and is controlled by the time interval. Limits for the time interval are proposed based upon energy decay and path statistics of the source subsystem. New methods are proposed for measuring and quantifying the transient power input from airborne and structure-borne excitation. Detailed analysis is also used to quantify the signal processing errors, due the time-weighted level detector and filters, associated with the measurement of maximum levels. The use of steady-state SEA coupling loss factors in TSEA for sound radiation and structure-borne sound transmission is validated through good agreement in comparisons of measurements and predictions of maximum sound and vibration levels. This validation is extended to complex transient sources that have been incorporated into TSEA, such as the ISO rubber ball, transients overlaying stationary noise and airborne transients. Case studies of heavyweight buildings show that accurate predictions of maximum sound pressure and vibration levels are given if Ns ≥ 1 and Mav ≥ 0.5. TSEA has also been validated for the prediction of structural decay curves, numerical experiments have been carried out to quantify the error in the estimation of the total loss factor and to develop an improvement to the evaluation of decay curves.
Download or read book Theory and Application of Statistical Energy Analysis written by Richard H Lyon and published by Elsevier. This book was released on 2014-06-28 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date second edition provides a comprehensive examination of the theory and application of Statistical Energy Analysis (SEA) in acoustics and vibration. Complete with examples and data taken from real problems this unique book also exploresthe influence of computers on SEA and emphasizes computer based SEA calculations. In addition to a discussion of the relationship between SEA and other procedures used in response estimation, Theory and Application of Statistical Energy Anlaysis, SecondEdition, explores the basic relationships between model and wave descriptions of systems.
Download or read book Fundamentals of Noise and Vibration Analysis for Engineers written by M. P. Norton and published by Cambridge University Press. This book was released on 2003-10-16 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise and Vibration affects all kinds of engineering structures, and is fast becoming an integral part of engineering courses at universities and colleges around the world. In this second edition, Michael Norton's classic text has been extensively updated to take into account recent developments in the field. Much of the new material has been provided by Denis Karczub, who joins Michael as second author for this edition. This book treats both noise and vibration in a single volume, with particular emphasis on wave-mode duality and interactions between sound waves and solid structures. There are numerous case studies, test cases, and examples for students to work through. The book is primarily intended as a textbook for senior level undergraduate and graduate courses, but is also a valuable reference for researchers and professionals looking to gain an overview of the field.
Download or read book Noise and Vibration Design Modeling with Statistical Energy Analysis written by Xianli Huang and published by . This book was released on 1994 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundations of Vibroacoustics written by Colin Hansen and published by CRC Press. This book was released on 2018-03-05 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides the foundation material for solving problems in vibroacoustics. These include the prediction of structural vibration levels and sound pressure levels in enclosed spaces resulting from known force or acoustic pressure excitations and the prediction of sound levels radiated by vibrating structures. The book also provides an excellent theoretical basis for understanding the processes involved in software that predicts structural vibration levels and structural sound radiation resulting from force excitation of the structure, as well as sound levels in enclosed spaces resulting from vibration of part of the enclosing structure or resulting from acoustic sources within the enclosure. The book is written in an easy to understand style with detailed explanations of important concepts. It begins with fundamental concepts in vibroacoustics and provides a framework for problem solution in both low and high frequency ranges. It forms a primer for students, and for those already well versed in vibroacoustics, the book provides an extremely useful reference. It offers a unified treatment of both acoustics and vibration fundamentals to provide a basis for solving problems involving structural vibration, sound radiation from vibrating structures, sound in enclosed spaces, and propagation of sound and vibration.
Download or read book Designing Structures for Noise and Vibration Control with Statistical Energy Analysis written by Liangyu Huang and published by . This book was released on 1998 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1971 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibroacoustic Simulation written by Alexander Peiffer and published by John Wiley & Sons. This book was released on 2022-05-11 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: VIBROACOUSTIC SIMULATION Learn to master the full range of vibroacoustic simulation using both SEA and hybrid FEM/SEA methods Vibroacoustic simulation is the discipline of modelling and predicting the acoustic waves and vibration of particular objects, systems, or structures. This is done through finite element methods (FEM) or statistical energy analysis (SEA) to cover the full frequency range. In the mid-frequency range, both methods must be combined into a hybrid FEM/SEA approach. By doing so, engineers can model full frequency vibroacoustic simulations in complex technical systems used in aircraft, trains, cars, ships, and satellites. Indeed, hybrid approaches are increasingly used in the automotive, aerospace, and rail industries. Previously covered primarily in scientific journals, Vibroacoustic Simulation provides a practical approach that helps readers master the full frequency range of vibroacoustic simulation. Through a systematic approach, the book illustrates why both FEM and SEA are necessary in acoustic engineering and how both can be used in combination through hybrid methodologies. Striking a crucial balance between complex theories and practical applications, the text provides real-world examples of vibroacoustic simulation, such as fuselage simulation, interior-noise prediction for electric and combustion vehicles, train profiles, and more, to help elucidate the concepts described within. Vibroacoustic Simulation also features: A balance of complex theories with the nuts and bolts of real-world applications Detailed worked examples of junction equations Case studies from companies like Audi and Airbus that illustrate how the methods discussed have been applied in real-world projects A companion website that provides corresponding Python codes for all examples, allowing readers to work through the examples on their own Vibroacoustic Simulation is a useful reference for acoustic and mechanical engineers working in the automotive, aerospace, defense, or rail industries, as well as researchers and graduate students studying acoustics.
Download or read book Inter noise written by and published by . This book was released on 1988 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1986 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Noise and Vibration Control written by Malcolm J. Crocker and published by John Wiley & Sons. This book was released on 2007-10-05 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two of the most acclaimed reference works in the area of acoustics in recent years have been our Encyclopedia of Acoustics, 4 Volume set and the Handbook of Acoustics spin-off. These works, edited by Malcolm Crocker, positioned Wiley as a major player in the acoustics reference market. With our recently published revision of Beranek & Ver's Noise and Vibration Control Engineering, Wiley is a highly respected name in the acoustics business. Crocker's new handbook covers an area of great importance to engineers and designers. Noise and vibration control is one largest areas of application of the acoustics topics covered in the successful encyclopedia and handbook. It is also an area that has been under-published in recent years. Crocker has positioned this reference to cover the gamut of topics while focusing more on the applications to industrial needs. In this way the book will become the best single source of need-to-know information for the professional markets.
Download or read book Proceedings of the Seventh International Congress on Sound and Vibration written by and published by . This book was released on 2000 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 2002 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Archives of Acoustics Quarterly written by and published by . This book was released on 2013 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Energy Methods for Vibration Transmission Analysis of Complex Structures written by Sungbae Choi and published by . This book was released on 1997 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
