Download or read book Static and Dynamic Analysis for Rotor shaft of Electric Motor written by Dr. Somnath G. Kolgiri and published by Shineeks Publishers. This book was released on 2023-03-06 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rotor shaft is a central component of the electric motor. The rotor shaft is the carrier shaft for the laminated core of the rotor and thus transmits the electrically induced torque via a corresponding positive connection in the transmission. This book gives detail design and analysis of rotor shaft of electric motor using FEA tools as well as traditional numerical technique.

Download or read book Dynamic Analysis of Permanent Magnet Stepping Motors written by David J. Robinson and published by . This book was released on 1969 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic analysis and maximum stepping rate prediction for permanent magnet motor.

Download or read book Proceedings of the 9th IFToMM International Conference on Rotor Dynamics written by Paolo Pennacchi and published by Springer. This book was released on 2015-05-26 with total page 2294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9th IFToMM International Conference on Rotor Dynamics. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, the IFToMM International Conference on Rotor Dynamics has become an irreplaceable point of reference for those working in the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.

Download or read book Proceedings of the 10th International Conference on Rotor Dynamics IFToMM written by Katia Lucchesi Cavalca and published by Springer. This book was released on 2018-08-20 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: IFToMM conferences have a history of success due to the various advances achieved in the field of rotor dynamics over the past three decades. These meetings have since become a leading global event, bringing together specialists from industry and academia to promote the exchange of knowledge, ideas, and information on the latest developments in the dynamics of rotating machinery. The scope of the conference is broad, including e.g. active components and vibration control, balancing, bearings, condition monitoring, dynamic analysis and stability, wind turbines and generators, electromechanical interactions in rotor dynamics and turbochargers. The proceedings are divided into four volumes. This fourth volume covers the following main topics: aero-engines; turbochargers; eolian (wind) generators; automotive rotating systems; and hydro power plants.

Download or read book Proceedings of the 6th National Symposium on Rotor Dynamics written by J. S. Rao and published by Springer Nature. This book was released on 2020-10-13 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select papers presented during the 6th National Symposium on Rotor Dynamics, held at CSIR-NAL, Bangalore, and focuses on the latest trends in rotor dynamics and various challenges encountered in the design of rotating machinery. The book is of interest to researchers from mechanical, aerospace, tribology and power industries, engineering service providers and academics.

Download or read book Spend Analysis and Specification Development Using Failure Interpretation written by Michael D. Holloway and published by CRC Press. This book was released on 2011-02-07 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considering that the biggest machines that do the most work are made up of smaller machines and components, it becomes obvious that when a large machine breaks, it is normally due to small components acting antagonistically. Detailing a time-tested method for increasing productivity and lowering operational costs, Spend Analysis and Specification Development Using Failure Interpretation explains how to establish performance-based procurement specifications for the components, devices, and items that contribute the most to operational downtime and repair/replacement costs. The book emphasizes the critical need to perform both spend and failure analysis in order to develop a procurement document, which will ultimately reduce overall costs. Accompanied by downloadable resources with helpful material such as, specification checklists, case study worksheets, form letters, and return on investment (ROI) worksheets that you can customize to your needs, the text discusses how to: Identify the products that will cost the most if they fail Develop performance-based procurement specifications to reduce direct and indirect costs Examine cost analysis as it relates to operations, maintenance, and production Determine effective criteria based on properties, test results, and standards for each operation Written by an industry expert with decades of experience giving seminars, training customers and associates, and authoring numerous papers and articles, the text provides the real-world understanding of the influential components and materials’ physical properties needed to engage in effective failure and spend analysis. It addresses product submission and monitoring and includes helpful tools so you can immediately get started on conducting your own cost-saving analysis.

Download or read book Electric Machines written by Hamid A. Toliyat and published by CRC Press. This book was released on 2017-12-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: With countless electric motors being used in daily life, in everything from transportation and medical treatment to military operation and communication, unexpected failures can lead to the loss of valuable human life or a costly standstill in industry. To prevent this, it is important to precisely detect or continuously monitor the working condition of a motor. Electric Machines: Modeling, Condition Monitoring, and Fault Diagnosis reviews diagnosis technologies and provides an application guide for readers who want to research, develop, and implement a more effective fault diagnosis and condition monitoring scheme—thus improving safety and reliability in electric motor operation. It also supplies a solid foundation in the fundamentals of fault cause and effect. Combines Theoretical Analysis and Practical Application Written by experts in electrical engineering, the book approaches the fault diagnosis of electrical motors through the process of theoretical analysis and practical application. It begins by explaining how to analyze the fundamentals of machine failure using the winding functions method, the magnetic equivalent circuit method, and finite element analysis. It then examines how to implement fault diagnosis using techniques such as the motor current signature analysis (MCSA) method, frequency domain method, model-based techniques, and a pattern recognition scheme. Emphasizing the MCSA implementation method, the authors discuss robust signal processing techniques and the implementation of reference-frame-theory-based fault diagnosis for hybrid vehicles. Fault Modeling, Diagnosis, and Implementation in One Volume Based on years of research and development at the Electrical Machines & Power Electronics (EMPE) Laboratory at Texas A&M University, this book describes practical analysis and implementation strategies that readers can use in their work. It brings together, in one volume, the fundamentals of motor fault conditions, advanced fault modeling theory, fault diagnosis techniques, and low-cost DSP-based fault diagnosis implementation strategies.

Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1994 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solar Energy Update written by and published by . This book was released on 1982-07 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamics of Rotating Machines written by M. I. Friswell and published by Cambridge University Press. This book was released on 2010-03-31 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables engineers to understand the dynamics of rotating machines, from basic explanations to detailed numerical models and analysis.

Download or read book Mechanical Design and Manufacturing of Electric Motors written by Wei Tong and published by CRC Press. This book was released on 2022-05-19 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Focuses on practical design and manufacturing process 2. Contains Industrial working experiences 3. Includes innovations in development of electric machines 4. Includes read-to-implement solutions in electric machine design 5. Discusses state-of-the-art technology in modern electric machine design

Download or read book Current Signature Analysis for Condition Monitoring of Cage Induction Motors written by William T. Thomson and published by John Wiley & Sons. This book was released on 2017-01-24 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of Motor Current Signature Analysis (MCSA) for cage induction motors This book is primarily for industrial engineers. It has 13 chapters and contains a unique data base of 50 industrial case histories on the application of MCSA to diagnose broken rotor bars or unacceptable levels of airgap eccentricity in cage induction motors with ratings from 127 kW (170 H.P.) up to 10,160 kW (13,620 H.P.). There are also unsuccessful case histories, which is another unique feature of the book. The case studies also illustrate the effects of mechanical load dynamics downstream of the motor on the interpretation of current signatures. A number of cases are presented where abnormal operation of the driven load was diagnosed. Chapter 13 presents a critical appraisal of MCSA including successes, failures and lessons learned via industrial case histories. The case histories are presented in a step by step format, with predictions and outcomes supported by current spectra and photographic evidence to confirm a correct or incorrect diagnosis The case histories are presented in detail so readers fully understand the diagnosis The authors have 108 years of combined experience in the installation, maintenance, repair, design, manufacture, operation and condition monitoring of SCIMs There are 10 questions at the end of chapters 1 to 12 and answers can be obtained via the publisher Current Signature Analysis for Condition Monitoring of Cage Induction Motors serves as a reference for professional engineers, head electricians and technicians working with induction motors. To obtain the solutions manual for this book, please send an email to [email protected]. William T. Thomson is Director and Consultant with EM Diagnostics Ltd, in Scotland. Prof. Thomson received a BSc (Hons) in Electrical Engineering in 1973 and an MSc in 1977 from the University of Strathclyde. He has published 72 papers on condition monitoring of induction motors in a variety of engineering journals such as IEEE Transactions (USA), IEE Proceedings (UK), and also at numerous International IEEE and IEE conferences. He is a senior member of the IEEE, a fellow of the IEE (IET) in the UK and a Chartered Professional Engineer registered in the UK. Ian Culbert was a Rotating Machines Specialist at Iris Power Qualitrol since April 2002 until his very untimely death on 8th September, 2015. At this company he provided consulting services to customers, assisted in product development, trained sales and field service staff and reviewed stator winding partial discharge reports. He has co-authored two books on electrical machine insulation design, evaluation, aging, testing and repair and was principal author of a number of Electric Power Research Institute reports on motor repair. Ian was a Registered Professional Engineer in the Province of Ontario, Canada and a Senior Member of IEEE.

Download or read book Compressors and Modern Process Applications written by Heinz P. Bloch and published by John Wiley & Sons. This book was released on 2006-11-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern reference to the principles, operation, and applications of the most important compressor types Thoroughly addressing process-related information and a wider variety of the major compressor types of interest to process plants, Compressors and Modern Process Applications uniquely covers the systematic linkage of fluid processing machinery to the processes they serve. This book is a highly practical resource for professionals responsible for purchasing, servicing, or operating compressors. It describes the main features of over 300 petrochemical and refining schematics and associated process descriptions involving compressors and expanders in modern industry. The organized presentation of this reference covers first the basics of compressors and what they are, and then progresses to important operational and process issues. It then explains the underlying principles, operating modes, selection issues, and major hardware elements for compressors. Topics include double-acting positive displacement compressors, rotary positive displacement compressors, understanding centrifugal process gas compressors, power transmission and advanced bearing technology, centrifugal compressor performance, gas processing and turbo-expander applications, and compressors typically found in petroleum refining and other petrochemical processes. Suitable for plant operation personnel, machinery engineering specialists, process engineers,as well as undergraduate students of this subject, this book's special features include: * Flow schematics of modern process units and processes used in gas transport, gas conditioning, petrochemical manufacture, and petroleum refining * Listings of licensors for each process on the flow schematics * Identification of each process flow schematic of compressors, cryogenic, and hot gas expanders at their respective locations * Important overview of surge control, estimating compressor performance, applications for air separation and gas processing plants, petroleum refinery issues, and important criteria that govern compressor selection and application Placing hundreds of associated process flow schematics at the fingertips of professionals and students, author and industry expert Heinz Bloch facilitates comprehension of the workings of various petrochemical, oil refining, and product upgrading processes that are served by compressors.

Download or read book Measurement While Drilling written by Wilson C. Chin and published by John Wiley & Sons. This book was released on 2018-07-23 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trade magazines and review articles describe MWD in casual terms, e.g., positive versus negative pulsers, continuous wave systems, drilling channel noise and attenuation, in very simple terms absent of technical rigor. However, few truly scientific discussions are available on existing methods, let alone the advances necessary for high-data-rate telemetry. Without a strong foundation building on solid acoustic principles, rigorous mathematics, and of course, fast, inexpensive and efficient testing of mechanical designs, low data rates will impose unacceptable quality issues to real-time formation evaluation for years to come. This all-new revised second edition of an instant classic promises to change all of this. The lead author and M.I.T.-educated scientist, Wilson Chin, has written the only book available that develops mud pulse telemetry from first principles, adapting sound acoustic principles to rigorous signal processing and efficient wind tunnel testing. In fact, the methods and telemetry principles developed in the book were recently adopted by one of the world's largest industrial corporations in its mission to redefine the face of MWD. The entire engineering history for continuous wave telemetry is covered: anecdotal stories and their fallacies, original hardware problems and their solutions, different noise mechanisms and their signal processing solutions, apparent paradoxes encountered in field tests and simple explanations to complicated questions, and so on, are discussed in complete "tell all" detail for students, research professors and professional engineers alike. These include signal processing algorithms, signal enhancement methods, and highly efficient "short" and "long wind tunnel" test methods, whose results can be dynamically re-scaled to real muds flowing at any speed. A must read for all petroleum engineering professionals!

Download or read book Mechanical Vibrations written by William Tyrrell Thomson and published by . This book was released on 1964 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electric Motors and Drives written by Austin Hughes and published by Newnes. This book was released on 2013-02-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Motors and Drives is intended for non-specialist users of electric motors and drives, filling the gap between maths- and theory-based academic textbooks and the more prosaic 'handbooks', which provide useful detail but little opportunity for the development of real insight and understanding. The book explores all of the widely-used modern types of motor and drive, including conventional and brushless D.C., induction motors and servo drives, providing readers with the knowledge to select the right technology for a given job. The third edition includes additional diagrams and worked examples throughout. New topics include digital interfacing and control of drives, direct torque control of induction motors and current-fed operation in DC drives. The material on brushless servomotors has also been expanded. Austin Hughes' approach, using a minimum of maths, has established Electric Motors and Drives as a leading guide for electrical engineers and mechanical engineers, and the key to a complex subject for a wider readership, including technicians, managers and students. Acquire knowledge of and understanding of the capabilities and limitations of motors and drives without struggling through unnecessary maths and theory Updated material on the latest and most widely-used modern motors and drives, including brushless servomotors New edition includes additional diagrams and worked examples throughout

Download or read book Mechanical Design of Electric Motors written by Wei Tong and published by CRC Press. This book was released on 2014-04-28 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid increases in energy consumption and emphasis on environmental protection have posed challenges for the motor industry, as has the design and manufacture of highly efficient, reliable, cost-effective, energy-saving, quiet, precisely controlled, and long-lasting electric motors.Suitable for motor designers, engineers, and manufacturers, as well