Download or read book Start to end Simulations for the Proposed Fermilab High Intensity Proton Source written by and published by . This book was released on 2007 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: A High Intensity Proton Source consisting in an 8 GeV superconducting H-minus linac and transfer line to the Main Injector has been proposed. The primary mission is to increase the intensity of the Fermilab Main Injector for the production of neutrino superbeams. Start-to-end simulations from the RFQ to the stripping foil using the simulation code TRACK (ANL) is presented in this paper. In particular, we will study the impact of jitter errors on the H-minus phase space at the stripping foil.
Download or read book Space Charge Measurements with a High Intensity Bunch at the Fermilab Main Injector written by and published by . This book was released on 2011 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: For Project X, the Fermilab Main Injector will be required to operate with 3 times higher bunch intensity. The plan to study the space charge effects at the injection energy with intense bunches will be discussed. A multi-MW proton facility has been established as a critical need for the U.S. HEP program by HEPAP and P5. Utilization of the Main Injector (MI) as a high intensity proton source capable of delivering in excess of 2 MW beam power will require a factor of three increase in bunch intensity compared to current operations. Instabilities associated with beam loading, space charge, and electron cloud effects are common issues for high intensity proton machines. The MI intensities for current operations and Project X are listed in Table 1. The MI provides proton beams for Fermilab's Tevatron Proton-Antiproton Collider and MINOS neutrino experiments. The proposed 2MW proton facility, Project X, utilizes both the Recycler (RR) and the MI. The RR will be reconfigured as a proton accumulator and injector to realize the factor 3 bunch intensity increase in the MI. Since the energy in the RR and the MI at injection will be 6-8 GeV, which is relatively low, space charge effects will be significant and need to be studied. Studies based on the formation of high intensity bunches in the MI will guide the design and fabrication of the RF cavities and space-charge mitigation devices required for 2 MW operation of the MI. It is possible to create the higher bunch intensities required in the MI using a coalescing technique that has been successfully developed at Fermilab. This paper will discuss a 5 bunch coalescing scheme at 8 GeV which will produce 2.5 x 1011 protons in one bunch. Bunch stretching will be added to the coalescing process. The required RF parameters were optimized with longitudinal simulations. The beam studies, that have a goal of 85% coalescing efficiency, were started in June 2010.
Download or read book Project X a New Multi megawatt Proton Source at Fermilab written by and published by . This book was released on 2011 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project X is a multi-megawatt proton facility being developed to support intensity frontier research in elementary particle physics, with possible applications to nuclear physics and nuclear energy research, at Fermilab. The centerpiece of this program is a superconducting H-linac that will support world leading programs in long baseline neutrino experimentation and the study of rare processes. Based on technology shared with the International Linear Collider (ILC), Project X will provide multi-MW beams at 60-120 GeV from the Main Injector, simultaneous with very high intensity beams at lower energies. Project X will also support development of a Muon Collider as a future facility at the energy frontier.
Download or read book Plans for a Proton Driver at Fermilab written by and published by . This book was released on 2005 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last several years, stunning experimental results have established that neutrinos have nonzero masses and substantial mixing. The Standard Model must be extended to accommodate neutrino mass terms. The observation that neutrino masses and mass splittings are all many orders of magnitude smaller than those of any of the other fundamental fermions suggests radically new physics, perhaps originating at the GUT or Planck Scale, or perhaps the existence of new spatial dimensions. In some sense we know that the Standard Model is broken, but we don't know how it is broken. Whatever the origin of the observed neutrino masses and mixing, it is likely to require a profound extension to our picture of the physical world. The first steps in understanding this revolutionary new physics are to pin down the measurable parameters and to address the next round of basic questions: (1) Are there only three neutrino flavors, or do light, sterile neutrinos exist? (2) If there are only three generations, there is one angle (?13) in the mixing matrix that is unmeasured. How large is it? (3) Which of the two possible orderings of the neutrino mass eigenstates applies? (4) If?13 is large enough one it may be possible to measure the quantum-mechanical phase?. If?13 and? are non-zero there will be CP violation in the lepton sector. These questions can be addressed by accelerator based neutrino oscillation experiments. The answers will guide our understanding of what lies beyond the Standard Model, and whether the new physics provides an explanation for the baryon asymmetry of the Universe (via leptogenesis), or provides deep insight into the connection between quark and lepton properties (via Grand Unified Theories), or perhaps leads to an understanding of one of the most profound questions in physics: Why are there three generations of quarks and leptons? The answers may well further challenge our picture of the physical world, and will certainly have important implications for our understanding of cosmology and the evolution of the early Universe. The current Fermilab Program is an important part of the world-wide accelerator based effort to explore and understand the physics of neutrino oscillations. By early 2005, with both MINOS and MiniBooNE taking data, Fermilab will be able to answer some of the most pressing first-round questions raised by the discovery that neutrinos have mass. Fermilab's high-intensity neutrino beams are derived from 8- and 120-GeV proton beams. MiniBooNE is currently taking data using 8 GeV Protons from the Booster. The 120 GeV NuMI beam will start to operate in early 2005 using a 0.25 MW proton beam power from the Main Injector. Future neutrino programs will build on these existing facilities. New short and long baseline experiments have been proposed. There are proposals to increase the available number of protons at 8 and 120 GeV with the goal of addressing the full range of questions presented by neutrino oscillations. Key to that vision is a new intense proton source that usually is referred to as the Proton Driver.
Download or read book Proceedings of the Workshop on Applications of High Intensity Proton Accelerators written by Rajendran Raja and published by World Scientific. This book was released on 2010 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume captures the contents of the talks given at the Workshop on Applications of High Intensity Proton Accelerators held at Fermilab Oct 19ndash;21, 2009. This workshop brought together experts from a variety of disciplines to explore new and profound ways proton accelerators can be used in the future. The workshop explored uses of such a proton source for producing intense muon, kaon and neutrino beams as well as using the intense protons for new forms of nuclear reactors that go by the name Accelerator Driven Sub-critical systems that promise to increase our available nuclear fuel supply by orders of magnitude while at the same time solving the nuclear waste problem. Intense proton beams can also be used to produce short-lived nuclear isotopes that are important in the medical industry.
Download or read book Fermilab HINS Proton Ion Source Beam Measurements written by and published by . This book was released on 2009 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proton ion source for the High Intensity Neutrino Source (HINS) Linac front-end at Fermilab has been successfully commissioned. It produces a 50 keV, 3 msec beam pulse with a peak current greater than 20mA at 2.5Hz. The beam is transported to the radio-frequency quadrupole (RFQ) by a low energy beam transport (LEBT) that consists of two focusing solenoids, four steering dipole magnets and a beam current transformer. To understand beam transmission through the RFQ, it is important to characterize the 50 keV beam before connecting the LEBT to the RFQ. A wire scanner and a Faraday cup are temporarily installed at the exit of the LEBT to study the beam parameters. Beam profile measurements are made for different LEBT settings and results are compared to those from computer simulations. In lieu of direct emittance measurements, solenoid variation method based on profile measurements is used to reconstruct the beam emittance.
Download or read book Fermilab Report written by and published by . This book was released on 1984 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report on Workshop on Future Directions for Accelerator R D at Fermilab written by and published by . This book was released on 2009 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accelerator R & D has played a crucial role in enabling scientific discovery in the past century and will continue to play this role in the years to come. In the U.S., the Office of High Energy Physics of DOE's Office of Science is developing a plan for national accelerator R & D stewardship. Fermilab undertakes accelerator research, design, and development focused on superconducting radio-frequency (RF), superconducting magnet, beam cooling, and high intensity proton technologies. In addition, the Lab pursues comprehensive integrated theoretical concepts and simulations of complete future facilities on both the energy and intensity frontiers. At present, Fermilab (1) supplies integrated design concept and technology development for a multi-MW proton source (Project X) to support world-leading programs in long baseline neutrino and rare processes experiments; (2) plays a leading role in the development of ionization cooling technologies required for muon storage ring facilities at the energy (multi-TeV Muon Collider) and intensity (Neutrino Factory) frontiers, and supplies integrated design concepts for these facilities; and (3) carries out a program of advanced accelerator R & D (AARD) in the field of high quality beam sources, and novel beam manipulation techniques.
Download or read book Project X written by and published by . This book was released on 2010 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Fermilab Tevatron Collider program draws to a close a strategy has emerged of an experimental program built around the high intensity frontier. The centerpiece of this program is a superconducting H- linac that will support world leading programs in long baseline neutrino experimentation and he study of rare processes. Based on technology shared with the International Linear Collider (ILC), Project X will provide multi-MW beams at 60-120 GeV from the Main Injector, simultaneous with very high intensity beams at lower energies. Project X will also support development of a Muon Collider as a uture facility at the energy frontier.
Download or read book FNAL Proton Source High Intensity Operations and Beam Loss Control written by and published by . This book was released on 2012 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Design of Charged Particle Beams written by Martin Reiser and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although particle accelerators are the book's main thrust, it offers a broad synoptic description of beams which applies to a wide range of other devices such as low-energy focusing and transport systems and high-power microwave sources. Develops material from first principles, basic equations and theorems in a systematic way. Assumptions and approximations are clearly indicated. Discusses underlying physics and validity of theoretical relationships, design formulas and scaling laws. Features a significant amount of recent work including image effects and the Boltzmann line charge density profiles in bunched beams.
Download or read book Space Charge Effect of the High Intensity Proton Beam During the Resonance Extraction for the Mu2e Experiment at Fermilab written by and published by . This book was released on 2011 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed Mu2e experiment to search for direct [mu] → e conversion at Fermilab plans slow, resonant extraction of a beam with 3 x 1012 protons from the Debuncher ring. Space charge of this high intensity beam is a critical factor, since it induces significant betatron tune spread and consequently affects resonance extraction processes, such as spill uniformity and beam losses. This study shows the multi-particle simulation results in the early stages of resonance extraction and spill uniformity in the presence of 2D and 3D space charge effects. We have presented the results of the third-integer resonance extraction in early stage for the Mu2e experiment in the presence of space charge effects. In order to track particles and to calculate self-consistent space charge effects, Synergia2 was used, which is capable of parallel computing. The space charge tune shift was computed and was reasonable value compared with the analytical calculation. Locations of the septum and Lambertson were chosen so that particles are kicked and extracted efficiently. The spill rates for with and without space charge effects were uniform, but should be improved for the early stage after the sextupole field ramping.
Download or read book The Proton Driver Design Study written by and published by . This book was released on 2001 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a 1997 summer study, a team led by Steve Holmes formulated a development plan for the Fermilab proton source and described the results in TM-2021. Subsequently, at the end of 1998, a task group was formed to prepare a detailed design of a high intensity facility called the Proton Driver to replace the Fermilab Booster. In the past two years the design effort has attracted more than fifty participants, mostly from the Beams Division. Physicists and engineers from the Technical Division and FESS as well as other institutions, including the Illinois Institute of Technology (IIT), Stanford University, University of Hawaii, CERN in Switzerland, Rutherford Appleton Laboratory in England and the IHEP in Russia also contributed heavily. The results of that effort are summarized in this document describing the design of a 16 GeV synchrotron, two new beam transport lines (a 400 MeV injection line and a 12/16 GeV extraction line), and related improvements to the present negative ion source and the 400 MeV Linac. A construction cost estimate is presented in Appendix A.
Download or read book Physics at an Upgraded Proton Driver at Fermilab written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The accelerator-based particle physics program in the US is entering a period of transition. This is particularly true at Fermilab which for more than two decades has been the home of the Tevatron Proton-Antiproton Collider, the World's highest energy hadron collider. In a few years time the energy frontier will move to the LHC at CERN. Hence, if an accelerator-based program is to survive at Fermilab, it must evolve. Fermilab is fortunate in that, in addition to hosting the Tevatron Collider, the laboratory also hosts the US accelerator-based neutrino program. The recent discovery that neutrino flavors oscillate has opened a new exciting world for us to explore, and has created an opportunity for the Fermilab accelerator complex to continue to address the cutting-edge questions of particle physics beyond the Tevatron Collider era. The presently foreseen neutrino oscillation experiments at Fermilab (MiniBooNE [1] and MINOS [2]) will enable the laboratory to begin contributing to the Global oscillation physics program in the near future, and will help us better understand the basic parameters describing the oscillations. However, this is only a first step. To be able to pin down all of the oscillation parameters, and hopefully make new discoveries along the way, we will need high statistics experiments, which will require a very intense neutrino beam, and one or more very massive detectors. In particular we will require new MW-scale primary proton beams and perhaps ultimately a Neutrino Factory [3]. Plans to upgrade the Fermilab Proton Driver are presently being developed [4]. The upgrade project would replace the Fermilab Booster with a new 8 GeV accelerator with 0.5-2 MW beam power, a factor of 15-60 more than the current Booster. It would also make the modifications needed to the Fermilab Main Injector (MI) to upgrade it to simultaneously provide 120 GeV beams of 2 MW. This would enable a factor of 5-10 increase in neutrino beam intensities at the MI, while also supporting a vigorous 8 GeV fixed-target program. In addition, a Proton Driver might also serve as a stepping-stone to future accelerators, both as an R & D test bed and as an injector, with connections to the Linear Collider, Neutrino Factories, and a VLHC. Hence, although neutrino physics would provide the main thrust for the science program at an upgraded Fermilab proton source, the new facility would also offer exciting opportunities for other fixed-target particle physics (kaons, muons, neutrons, antiprotons, etc.) and a path towards new accelerators in the future.
Download or read book Physics at a New Fermilab Proton Driver written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2004 the Fermilab Long Range Planning Committee identified a new high intensity Proton Driver as an attractive option for the future, primarily motivated by the recent exciting developments in neutrino physics. The Fermilab Director has requested further development of the physics case for a new Fermilab Proton Driver, exploring both its ability to support a World class neutrino program, and the other physics opportunities it would provide. A physics study has been ongoing for the last 6 months. The emerging physics case will be presented.
Download or read book Simulations of Space Charge in the Fermilab Main Injector written by and published by . This book was released on 2011 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fermilab Project X plan for future high intensity operation relies on the Main Injector as the engine for delivering protons in the 60-120 GeV energy range. Project X plans call for increasing the number of protons per Main Injector bunch from the current value of 1.0 x 1011 to 3.0 x 1011. Space charge effects at the injection energy of 8 GeV have the potential to seriously disrupt operations. We report on ongoing simulation efforts with Synergia, MARYLIE/Impact, and IMPACT, which provide comprehensive capabilities for parallel, multi-physics modeling of beam dynamics in the Main Injector including 3D space-charge effects.
Download or read book Beam Acceleration In Crystals And Nanostructures Proceedings Of The Workshop written by Gerard Mourou and published by . This book was released on 2020 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt:
