Download or read book Safety of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
Download or read book Procurement Engineering and Supply Chain Guidelines in Support of Operation and Maintenance of Nuclear Facilities written by International Atomic Energy Agency and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Procurement must be effectively managed to ensure availability of design functions throughout a nuclear facility's service life. Ineffective control of procurement process can jeopardize facility safety, reduce reliability, or can result in increased costs to operating organizations. This publication provides an overview of nuclear procurement processes, issues of special concern, and provides guidance for good practices to set up and manage a high-quality procurement organization. Lessons learned for organizations considering new build nuclear projects are also included.
Download or read book Maintenance of Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 1990 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standards and guides for operation and maintenance of nuclear power plants written by and published by . This book was released on 1997 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Power Plant Safety and Mechanical Integrity written by George Antaki and published by Butterworth-Heinemann. This book was released on 2014-11-25 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most critical requirements for safe and reliable nuclear power plant operations is the availability of competent maintenance personnel. However, just as the nuclear power industry is experiencing a renaissance, it is also experiencing an exodus of seasoned maintenance professionals due to retirement. The perfect guide for engineers just entering the field or experienced maintenance supervisors who need to keep abreast of the latest industry best practices, Nuclear Power Plant Maintenance: Mechanical Systems, Equipment and Safety covers the most common issues faced in day-to-day operations and provides practical, technically proven solutions. The book also explains how to navigate the various maintenance codes, standards and regulations for the nuclear power industry. - Discusses 50 common issues faced by engineers in the nuclear power plant field - Provides advice for complying with international codes and standards (including ASME) - Describes safety classification for systems and components - Includes case studies to clearly explain the lessons learned over decades in the nuclear power industry
Download or read book Handbook for Regulatory Inspectors of Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2019-05-22 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication addresses inspection basics, concepts and methods on how to plan inspection activities, perform inspections of safety related structures, systems and components, evaluate the safety significance of inspection findings, and document the results. It presents high level considerations for the inspection of selected programmatic areas including plant operations, radiation protection, fire protection and maintenance activities at nuclear power plants (NPPs). The publication focuses on the regulatory inspection of operating NPPs and, when applicable, describes how the same inspection techniques can be applied to facilities undergoing construction, preoperational testing, and decommissioning. The general techniques described may be also used in the inspection of other types of nuclear facilities.
Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.
Download or read book NRC Regulatory Guides written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1973 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of currently available electronic versions of NRC regulatory guides.
Download or read book Management of Nuclear Power Plant Projects written by IAEA and published by International Atomic Energy Agency. This book was released on 2020-11-25 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Member States intending to introduce a nuclear power programme will need to pass through several phases during the implementation. Experience shows that careful planning of the objectives, roles, responsibilities, interfaces and tasks to be carried out in different phases of a nuclear project is important for success. This publication presents a harmonized approach that may be used to structure the owner/operator management system and establish and manage nuclear projects and their development activities irrespective of the adopted approach. It has been developed from shared management practices and consolidated experiences provided by nuclear project management specialists through a series of workshops and working groups organized by the IAEA. The resultant publication presents a useful framework for the management of nuclear projects from initiation to closeout and captures international best practices.
Download or read book Human Factors Engineering in the Design of Nuclear Power Plants IAEA Safety Standards Series No Ssg 51 written by International Atomic Energy Agency and published by . This book was released on 2019-08-31 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides recommendations and guidance for meeting Requirement 32 of IAEA Safety Standards Series No. SSR-2/1 (Rev. 1), Safety of Nuclear Power Plants: Design, for optimal operator performance involving systematic consideration of human factors, including the human machine interface (HMI). The Safety Guide provides a structured approach and guidance on application of human factors engineering (HFE) in the design of the HMI, which is the basis for human physical and cognitive processes in nuclear power plants. It applies to application of HFE in the design, operation and maintenance of the HMI for new plants, as well as for modifications of the HMI of existing plants.
Download or read book Guidelines for Writing Effective Operating and Maintenance Procedures written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EPA investigation of a 1994 chemical plant tragedy concluded that "the explosion resulted from a lack of written safe operating procedures..." While good written procedures can't guarantee zero accidents, they can reduce the number of accidents caused by human error. This new book shows how to remedy this problem through selecting and implementing actions that promote safe, efficient operations and maintenance, improve quality, continuity, profitability and cost control, build upon and record process experience, and promote the concept that operating and maintenance procedures are vital plant components. It includes practical samples of procedure formats, checklists and many references.
Download or read book Lessons Learned from the Fukushima Nuclear Accident for Improving Safety of U S Nuclear Plants written by National Research Council (U.S.). Committee on Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants and published by National Academy Press. This book was released on 2014-10-29 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The March 11, 2011, Great East Japan Earthquake and tsunami sparked a humanitarian disaster in northeastern Japan. They were responsible for more than 15,900 deaths and 2,600 missing persons as well as physical infrastructure damages exceeding $200 billion. The earthquake and tsunami also initiated a severe nuclear accident at the Fukushima Daiichi Nuclear Power Station. Three of the six reactors at the plant sustained severe core damage and released hydrogen and radioactive materials. Explosion of the released hydrogen damaged three reactor buildings and impeded onsite emergency response efforts. The accident prompted widespread evacuations of local populations, large economic losses, and the eventual shutdown of all nuclear power plants in Japan. "Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants" is a study of the Fukushima Daiichi accident. This report examines the causes of the crisis, the performance of safety systems at the plant, and the responses of its operators following the earthquake and tsunami. The report then considers the lessons that can be learned and their implications for U.S. safety and storage of spent nuclear fuel and high-level waste, commercial nuclear reactor safety and security regulations, and design improvements. "Lessons Learned" makes recommendations to improve plant systems, resources, and operator training to enable effective ad hoc responses to severe accidents. This report's recommendations to incorporate modern risk concepts into safety regulations and improve the nuclear safety culture will help the industry prepare for events that could challenge the design of plant structures and lead to a loss of critical safety functions. In providing a broad-scope, high-level examination of the accident, "Lessons Learned" is meant to complement earlier evaluations by industry and regulators. This in-depth review will be an essential resource for the nuclear power industry, policy makers, and anyone interested in the state of U.S. preparedness and response in the face of crisis situations.
Download or read book Power Generation Handbook written by Philip Kiameh and published by McGraw Hill Professional. This book was released on 2002-08-28 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: We’ve all lived through long hot summers with power shortages, brownouts, and blackouts. But at last, all the what-to-do and how-to-do it information you’ll need to handle a full range of operation and maintenance tasks at your fingertips. Written by a power industry expert, Power Generation Handbook: Selection, Applications, Operation, Maintenance helps you to gain a thorough understanding of all components, calculations, and subsystems of the various types of gas turbines, steam power plants, co-generation, and combined cycle plants. Divided into five sections, Power Generation Handbook: Selection, Applications, Operation, Maintenance provides a thorough understanding of co-generation and combined cycle plants. Each of the components such as compressors, gas and steam turbines, heat recovery steam generators, condensers, lubricating systems, transformers, and generators are covered in detail. The selection considerations, operation, maintenance and economics of co-generation plants and combined cycles as well as emission limits, monitoring and governing systems will also be covered thoroughly. This all-in-one resource gives you step-by-step guidance on how to maximize the efficiency, reliability and longevity of your power generation plant.
Download or read book Project Management in Nuclear Power Plant Construction written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides guidance on project management from the preparatory phase to plant turnover to commissioning of nuclear power plants. The guidelines and experiences described will enable project managers to obtain better performance in nuclear power plant construction.
Download or read book Nuclear Power Plant Life Management and Longer term Operation written by OECD Nuclear Energy Agency and published by OECD Publishing. This book was released on 2006 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: On cover and title page: Nuclear development
Download or read book Maintenance Optimization Programme for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication deals with the latest nuclear power plant maintenance optimization programmes and provides key requirements and strategies for successful implementation. It documents shared proven maintenance optimization methods and techniques from Member States, including more detailed examples in the annexes of this publication.
Download or read book Commissioning for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2003 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide deals with the commissioning of land based stationary thermal nuclear power plants of all types. It covers how to meet the requirements of the commissioning programme, organization and management, test and review procedures, and the interfaces between organizations involved in commissioning activities. It also deals with the control of changes in the commissioning activities. It also deals with the control of changes in the commissioning programme and with the documentation required and produced in commissioning.
