Download or read book Standardization of Work Measurement Volume 10 Universal Common to Two Or More Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Universal Standard Time Data is one of eleven volumes included in DWMSTDP. It is termed "Universal" because it provides a single DOD source for standard time data elements which can be used in the development of labor standards in several occupation categories. This publication applies to all military services and defense agencies. The data contained herein will be used to the maximum extent possible in the development of labor performance standards. The Universal Standard Time Data contained in this volume are to be applied in accordance with the general instructions contained in the Basic Volume and the specific instructions contained in this volume. All newly developed or existing Universal Standard Time Data elements not now included herein should be submitted with back-up motion pattern analysis to the Defense Industrial Resources Support off ice (DIRSO), for review, coordination, and inclusion in the updating changes to this volume. The Basic Volume contains procedures for submitting these data elements.
Download or read book Military Publications written by and published by . This book was released on 1978-05 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Military Publications written by United States. Department of the Army and published by . This book was released on 1978 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index of Administrative Publications written by United States. Department of the Army and published by . This book was released on 1978 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of Defense Joint Chiefs of Staff interservice publications and Air Force acquisition documents written by and published by . This book was released on 1986 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1977 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standardization of Work Measurement Volume 3 Service Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Service Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWMSTDP. Service Occupations as categorized by the Department of Labor includes those occupations concerned with performing tasks in and around private households; serving individuals in institutions and in commercial and other establishments; and protecting the public against crime, fire, accidents, and acts of war. This volume provides a single DoD source for Standard Time Data elements which can be used in the development of labor standards for: Organizations, activities, or functional areas whose primary missions correlate to service occupations, e.g., an activity whose primary responsibility is janitorial. laundry, food services, shoe repair, health service attendants, etc. 1.1.2 For service operations within organizations, activities, or functional areas engaged in other than service occupations, e.g., a janitor assigned to a machine shop. Elements of work performed by personnel whose primary jobs are other than service, but who may actually do that type work as a part of their jobs; e.g. a mechanic in a maintenance shop performing janitorial duties.
Download or read book Standardization of Work Measurement Volume 7 Bench Work Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Bench Work Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWMSTDP. Bench Work Occupations as categorized by the Department of Labor includes those occupations concerned with the use of body members, handtools, and bench machines to fit, grind, carve, mold, paint, sew, assemble, inspect, repair, test, and similarly work relatively small objects and materials, such as metal products, electronic components, electrical appliances, instruments, footwear, and garments. The work is usually performed at a set position in a mill, plant, or shop, at a bench, worktable, or conveyor. At the more complex levels, workers frequently read blueprints, follow patterns, use a variety of handtools, and assume responsibility for meeting standards. Workers of the less complex levels are required to follow standardized procedures.
Download or read book Standardization of Work Measurement Volume 5 Processing Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Processing Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWMSTDP. Processing Occupations as categorized by the Department of Labor includes those occupations concerned with refining, mixing, compounding, chemically treating, heat treating. or similarly working materials and products. Knowledge of a process and adherence to formulae other specifications are required in some degree. Vats, stills, ovens, furnaces, mixing machines, crushers, grinders, and related equipment or machines are usually involved. This volume provides a single DoD source for Standard Time Data which can be used in the development of labor standards for: Organizations, activities, or functional areas whose primary missions correlate to processing occupations, e.g., an activity whose primary responsibility is plating chemical cleaning, sandblasting, etc. For processing operations within organizations, activities, or functional areas engaged in other than processing occupations, e.g., a degreaser operator assigned to an instrument repair shop. Work performed by personnel whose primary jobs are other than processing, but who may actually do that type work as a part of their jobs, e.g., a packer performing a degreasing operation within a supply activity.
Download or read book Standardization of Work Measurement Volume 2 Clerical and Sales Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Clerical and Sales Occupations standard time data is one of several volumes included in the Defense Work Measurement Standard Time Data Program (DWMSTDP). It provides a single DoD source of clerical standard time data to be used in the economical development of labor standards for: Organizations, functions, or activities whose primary mission is clerical in nature, e.g., Finance, Data Processing, and Personnel Administration. Clerical jobs which are a part of organizations, functions, or activities whose primary mission is not clerical in nature, e.g., clerks, typists, and keypunch operators. Elements of work performed by personnel whose primary job is other than clerical but who do clerical work as a part of their job, e.g., filing of shop orders, filling out forms, sorting documents, and telephoning. This publication applies to all military services and defense agencies. The data contained herein will be used to the maximum extent possible in the development of labor performance standards in compliance with DoD Directive 5010.31 and DoD Instruction 5010.34.
Download or read book Standardization of Work Measurement Volume 4 Farming Fishery Forestry and Related Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Farming, Fishery, Forestry and Related Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWNSTDP. Farming, Fishery, Forestry and Related Occupations as categorized by the Department of labor includes those occupations concerned with growing, harvesting, catching and gathering land and aquatic plant and animal life and the products thereof; and occupations concerned with providing services in support of these activities. This volume provides a single DOD source for Standard Time Data which can be used in the development of labor standards for: Organizations, activities, or functional areas whose primary missions correlate to Farming, Fishery, Forestry and Related Occupations, e.g., an activity whose primary responsibility is groundkeeping, gardening, logging, farming, etc. For Farming, Fishery, Forestry and Related occupations within organizations, activities, or functional areas engaged in other than Farming, Fishery, Forestry and Related occupations; e.g., A groundskeeper assigned to a construction operation. Work performed by personnel whose primary jobs are other than farming, fishery, forestry, and related occupations, but who may actually do that type work as a part of their jobs: e.g., an ammunition handler performing groundskeeping duties within an ammunition ammunition depot.
Download or read book Standardization of Work Measurement Volume 6 Machine Trades Occupations written by United States. Defense Industrial Resources Support Office and published by . This book was released on 1975 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Machine Trades Occupations Standard Time Data is one of ten volumes of standard time data in the 11 volume series included in DWMSTDP. Machine Trades Occupations as categorized by the Department of Labor includes those occupations concerned with feeding, tending, operating, controlling, and setting up machines to cut, bore, mill, abrade, print, and similarly work such materials as metal, paper, wood, and stone. This includes understanding machine functions, reading blueprints, making mathematical computations and exercising Judgement to attain conformance to specifications. Disassembly, repair, reassembly, installation, and maintenance of machines and mechanical equipment, and weaving, knitting, spinning, and similarly working textiles are also included.
Download or read book Standardization of Work Measurement Basic Volume General Guidance written by United States. Department of Defense and published by . This book was released on 1973 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The MTM Journal of Methods time Measurement written by and published by . This book was released on 1978 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin of the Atomic Scientists written by and published by . This book was released on 1972-10 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
Download or read book Bulletin of the Atomic Scientists written by and published by . This book was released on 1955-04 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
Download or read book International Standard Classification of Occupations written by International Labour Office and published by International Labor Office. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Standard Classification of Occupations 2008 (ISCO-08) is a four-level hierarchically structured classification that covers all jobs in the world. Developed with the benefit of accumulated national and international experience as well as the help of experts from many countries and agencies, ISCO-08 is fully supported by the international community as an accepted standard for international labour statistics. ISCO-08 classifies jobs into 436 unit groups. These unit groups are aggregated into 130 minor groups, 43 sub-major groups and 10 major groups, based on their similarity in terms of the skill level and skill specialisation required for the jobs. This allows the production of relatively detailed internationally comparable data as well as summary information for only 10 groups at the highest level of aggregation. Each group in the classification is designated by a title and code number and is associated with a definition that specifies the scope of the group. The classification is divided into two volumes: Volume I presents the structure and definitions of all groups in ISCO-08 and their correspondence with ISCO-88, which it supersedes, while Volume II provides an updated and expanded index of occupational titles and associated ISCO-08 and ISCO-88 codes.
