Download or read book Introduction to Polymer Science and Technology written by and published by Bookboon. This book was released on with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Thermal Analysis and Calorimetry written by Simon Gaisford and published by Royal Society of Chemistry. This book was released on 2019-03-15 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of thermal and calorimetric methods has shown rapid growth over the past few decades, in an increasingly wide range of applications. The original text was published in 2001; since then there have been significant advances in various analytical techniques and their applications. This second edition supplies an up to date, concise and readable account of the principles, experimental apparatus and practical procedures used in thermal analysis and calorimetric methods of analysis. Written by experts in their field, brief accounts of the basic theory are reinforced with detailed technical advances and contemporary developments. Where appropriate, applications are used to highlight particular operating principles or methods of interpretation. As an important source of information for many levels of readership in a variety of areas, this book will be an aid for students and lecturers through to industrial and laboratory staff and consultants.

Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.

Download or read book Environmental Degradation of Industrial Composites written by Celine A Mahieux and published by Elsevier. This book was released on 2005-12-14 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to their low density and tailored properties, polymer matrix composites are attractive candidates for a large number of industrial applications ranging from aerospace to transportation and energy. However, the behaviour of polymer-based materials is strongly affected by a number of environmental factors. Environmental Degradation in Industrial Composites provides vital information on the effects of environmental factors such as temperature, liquid and gas exposure, electrical fields and radiations, and how micro- and micromechanical calculations during design and manufacture must take these effects into account. The book concludes with reviews on standard and specific testing methods for the various environmental factors and their combinations, helping mechanical/materials engineers and specifiers to predict possible changes due to environmental conditions. Each chapter is supplemented by industrial case studies to help in the understanding of degradation of composites in real life situations.This book will help you to...* Understand how environmental factors lead to degradation effects in polymer matrix composite structures* Build these factors into calculations when predicting the part performance and lifetime of structures* Compare real-life situations from case studies with your predicted results* Predict probable composite behaviour with greater accuracyThis book will help you to...* Understand how environmental factors lead to degradation effects in polymer matrix composite structures* Build these factors into calculations when predicting the part performance and lifetime of structures* Compare real-life situations from case studies with your predicted results* Predict probable composite behaviour with greater accuracy

Download or read book Differential Scanning Calorimetry written by G.W.H. Höhne and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Differential Scanning Calorimetry (DSC) is a well established measuring method which is used on a large scale in different areas of research, development, and quality inspection and testing. Over a large temperature range, thermal effects can be quickly identified and the relevant temperature and the characteristic caloric values determined using substance quantities in the mg range. Measurement values obtained by DSC allow heat capacity, heat of transition, kinetic data, purity and glass transition to be determined. DSC curves serve to identify substances, to set up phase diagrams and to determine degrees of crystallinity. This book provides, for the first time, an overall description of the most impor tant applications of Differential Scanning Calorimetry. Prerequisites for reliable measurement results, optimum evaluation of the measurement curves and esti mation of the uncertainties of measurement are, however, the knowledge of the theoretical bases of DSC, a precise calibration of the calorimeter and the correct analysis of the measurement curve. The largest part of this book deals with these basic aspects: The theory of DSC is discussed for both heat flux and power compensated instruments; temperature calibration and caloric calibration are described on the basis of thermodynamic principles. Desmearing of the measurement curve in different ways is presented as a method for evaluating the curves of fast transitions.

Download or read book Advanced Characterization and Testing of Textiles written by Patricia I. Dolez and published by Woodhead Publishing. This book was released on 2017-09-19 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Characterization and Testing of Textiles explores developments in physical and chemical testing and specific high-performance tests relating to textiles. The book introduces the principles of advanced characterization and testing, including the importance of performance-based specifications in the textiles industry. Chapters are organized by textile properties, providing in-depth coverage of each characteristic. Tests for specific applications are addressed, with the main focus on high-performance and technical textiles. - Focuses on advanced testing methods for technical and high-performance textiles, covering state-of-the-art technology in its field - Details specific textile properties and associated testing for each characteristic

Download or read book Analytical Characterization of Aluminum Steel and Superalloys written by D. Scott MacKenzie and published by CRC Press. This book was released on 2005-10-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This one-of-a-kind reference examines conventional and advanced methodologies for the quantitative evaluation of properties and characterization of microstructures in metals. It presents methods for uncovering valuable information including precipitate mechanisms, kinetics, stability, crystallographic orientation, the effects of thermo-mechanical p

Download or read book Thermal analysis of Micro Nano and Non Crystalline Materials written by Jaroslav Šesták and published by Springer Science & Business Media. This book was released on 2012-10-28 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis of Micro-, Nano- and Non-Crystalline Materials: Transformation, Crystallization, Kinetics, and Thermodynamics complements and adds to volume 8 Glassy, Amorphous and Nano-Crystalline Materials by providing a coherent and authoritative overview of cutting-edge themes in this field. In particular, the book focuses on reaction thermodynamics and kinetics applied to solid-state chemistry and thermal physics of various states of materials. Written by an international array of distinguished academics, the book deals with fundamental and historical aspects of phenomenological kinetics, equilibrium background of processes, crystal defects, non-stoichiometry and nano-crystallinity, reduced glass-transition temperatures and glass-forming coefficients, determination of the glass transition by DSC, the role of heat transfer and phase transition in DTA experiments, explanation of DTA/DSC methods used for the estimation of crystal nucleation, structural relaxation and viscosity behaviour in glass and associated relaxation kinetics, influence of preliminary nucleation and coupled phenomenological kinetics, nucleation on both the strongly curved surfaces and nano-particles, crystallization of glassy and amorphous materials including oxides, chalcogenides and metals, non-parametric and fractal description of kinetics, disorder and dimensionality in nano-crystalline diamond, thermal analysis of waste glass batches, amorphous inorganic polysialates and bioactivity of hydroxyl groups as well as reaction kinetics and unconventional glass formability of oxide superconductors. Thermal Analysis of Micro-, Nano- and Non-Crystalline Materials: Transformation, Crystallization, Kinetics, and Thermodynamics is a valuable resource to advanced undergraduates, postgraduates, and researches working in the application fields of material thermodynamics, thermal analysis, thermophysical measurements, and calorimetry.

Download or read book Natural Fibers to Composites written by Yasir Nawab and published by Springer Nature. This book was released on 2022-12-11 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fiber composites are a preferred alternative to conventional composites due to their environment-friendly nature. However, their market share is limited due to: a) limited number and quantities of natural fibers available for composites, b) diversity in fibers structure, c) poor mechanical properties of fibers as well as composites, d) susceptibility to microbial attacks, and e) cellulose degradation temperature around 200 deg C, which hinders the development of natural fiber reinforced thermoplastic composites using thermoforming at high temperatures. A number of researchers have contributed to the solution of the problem of poor mechanical properties and issues related to fabrication during the last decade. This book covers these different solutions. The book is divided into two principal themes: a) structure–property relationship: fibers to composites—it includes the discussion on fibers, their surface modifications, variation in the structure of reinforcement, and approaches for the enhancement of properties. b) Fabrication process of composites—it includes the novel approaches used for the development of natural fiber composites using the commingling technique for thermoplastic composites.

Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-12 with total page 1382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.

Download or read book Department Of Defense Index of Specifications and Standards Numerical Listing Part II September 2005 written by and published by DIANE Publishing. This book was released on with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Matrix Composites Guidelines for Characterization of Structural Materials written by Composite Materials Handbook – 17 (CMH-17) and published by SAE International. This book was released on 2012-07-11 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 of this six-volume compendium contains guidelines for determining the properties of polymer matrix composite material systems and their constituents, as well as the properties of generic structural elements, including test planning, test matrices, sampling, conditioning, test procedure selection, data reporting, data reduction, statistical analysis, and other related topics. Special attention is given to the statistical treatment and analysis of data. Volume 1 contains guidelines for general development of material characterization data as well as specific requirements for publication of material data in CMH-17. The Composite Materials Handbook, referred to by industry groups as CMH-17, is a six-volume engineering reference tool that contains over 1,000 records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites. CMH-17 provides information and guidance necessary to design and fabricate end items from composite materials. It includes properties of composite materials that meet specific data requirements as well as guidelines for design, analysis, material selection, manufacturing, quality control, and repair. The primary purpose of the handbook is to standardize engineering methodologies related to testing, data reduction, and reporting of property data for current and emerging composite materials. It is used by engineers worldwide in designing and fabricating products made from composite materials.

Download or read book The Rheology Handbook written by Thomas Mezger and published by European Coatings. This book was released on 2020-08-25 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Already in its 5th edition, this standard work describes the principles of rheology clearly, vividly and in practical terms. The book includes the rheology of additives in waterborne dispersions and surfactant systems. Not only it is a great reference book, it can also serve as a textbook for studying the theory behind the methods. The practical use of rheology is presented in the areas quality control, production and application, chemical and mechanical engineering, materials science and industrial research and development. After reading this book, the reader should be able to perform tests with rotational and oscillatory rheometers and interpret the results correctly.

Download or read book YS YS T YST Product Catalog Translated English of Chinese Standard YS YS T YST written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese Industry Standards - Category: YS; YS/T; YST.

Download or read book TMS 2016 Supplemental Proceedings written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2016-02-03 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: The TMS 2016 Annual Meeting Supplemental Proceedings is a collection of papers from the TMS 2016 Annual Meeting & Exhibition, held February 14-18 in Nashville, Tennessee, USA. The papers in this volume represent 21 symposia from the meeting. This volume, along with the other proceedings volumes published for the meeting, and archival journals, such as Metallurgical and Materials Transactions and Journal of Electronic Materials, represents the available written record of the 67 symposia held at TMS2016. This proceedings volume contains both edited and unedited papers; the unedited papers have not necessarily been reviewed by the symposium organizers and are presented “as is.” The opinions and statements expressed within the papers are those of the individual authors only, and no confirmations or endorsements are intended or implied.

Download or read book Advances in Glass and Glass Ceramics written by Atiar R. Molla and published by Springer Nature. This book was released on with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book GB T 39859 2021 Translated English of Chinese Standard GBT39859 2021 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, as well as accompanying documents and order forms for gallium-based liquid metals. This document applies to gallium-based liquid metals used for cooling fluids, conductive fluids, thermal interface materials, electronic pastes, and magnetic fluid materials.