Download or read book Gas Measurement Technology in Theory and Practice written by Gerhard Wiegleb and published by Springer Nature. This book was released on 2023-05-18 with total page 1307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the physical properties of gases and describes the different measuring methods and sensor principles for the analysis of gas mixtures. The use of gas sensors in different applications is shown by means of practical examples. These applications of the metrological detection of gases originate from many fields of engineering, in particular energy technology, food technology, process engineering, biotechnology, safety engineering, medical technology and environmental technology. This book is a translation of the original German 1st edition Gasmesstechnik in Theorie und Praxis by Gerhard Wiegleb, published by Springer Fachmedien Wiesbaden GmbH, part of Springer Nature in 2017. The translation was done with the help of artificial intelligence (machine translation by the service DeepL.com). A subsequent human revision was done primarily in terms of content, so that the book will read stylistically differently from a conventional translation. Springer Nature works continuously to further the development of tools for the production of books and on the related technologies to support the authors.
Download or read book YY 0118 2016 Translated English of Chinese Standard YY0118 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-08-10 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, classification and size marking, expected performance, design attributes, materials, design evaluation, manufacture, sterilization, packing, and manufacturer information requirements for the total-hip and partial-hip joint prostheses.
Download or read book Annual Book of ASTM Standards written by American Society for Testing and Materials and published by . This book was released on 2007 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Book of ASTM Standards written by ASTM International and published by . This book was released on 2003 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book YY 0341 2 2020 Translated English of Chinese Standard YY0341 2 2020 written by https://www.chinesestandard.net and published by www.ChineseStandard.net. This book was released on 2021-07-30 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of YY 0341 specifies the special requirements for non-active surgical spinal implants (hereinafter referred to as "spinal implants"). In addition to the requirements that are specified in YY/T 0640, it also specifies the definition, requirements, test methods, manufacturing, sterilization, packaging and information provided by the manufacturer of spinal implants. This Part of YY 0341 applies to non-active surgical spinal implants other than artificial intervertebral disc implants.
Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).
Download or read book YY 0341 1 2020 Translated English of Chinese Standard YY0341 1 2020 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2021-02-08 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of YY 0341 specifies the special requirements for non-active surgical implants for osteosynthesis, including the terms and definitions, requirements, test methods, manufacturing, sterilization, packaging and information provided by the manufacturer, etc. of osteosynthesis implants. This part of YY0341 applies to osteosynthesis implants, not to the coating part of osteosynthesis implants with surface coating.
Download or read book PEEK Biomaterials Handbook written by Steven M. Kurtz and published by William Andrew. This book was released on 2011-10-28 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEEK biomaterials are currently used in thousands of spinal fusion patients around the world every year. Durability, biocompatibility and excellent resistance to aggressive sterilization procedures make PEEK a polymer of choice, replacing metal in orthopedic implants, from spinal implants and hip replacements to finger joints and dental implants. This Handbook brings together experts in many different facets related to PEEK clinical performance as well as in the areas of materials science, tribology, and biology to provide a complete reference for specialists in the field of plastics, biomaterials, medical device design and surgical applications. Steven Kurtz, author of the well respected UHMWPE Biomaterials Handbook and Director of the Implant Research Center at Drexel University, has developed a one-stop reference covering the processing and blending of PEEK, its properties and biotribology, and the expanding range of medical implants using PEEK: spinal implants, hip and knee replacement, etc. - Covering materials science, tribology and applications - Provides a complete reference for specialists in the field of plastics, biomaterials, biomedical engineering and medical device design and surgical applications
Download or read book Shape Memory Alloy Engineering written by Antonio Concilio and published by Butterworth-Heinemann. This book was released on 2021-01-13 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Alloy Engineering: For Aerospace, Structural and Biomedical Applications, Second Edition embraces new advancements in materials, systems and applications introduced since the first edition. Readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams. Sections address modeling and design process aspects, explore recent applications, and discuss research activities aimed at making new devices for innovative implementations. The book discusses both the potential of these fascinating materials, their limitations in everyday life, and tactics on how to overcome some limitations in order to achieve proper design of useful SMA mechanisms. - Provides a greatly expanded scope, looking at new applications of SMA devices and current research activities - Covers all aspects of SMA technology - from a global state-of-the-art survey, to the classification of existing materials, basic material design, material manufacture, and from device engineering design to implementation within actual systems - Presents the material within a modular architecture over different topics, from material conception to practical engineering realization
Download or read book Fundamentals of Laser Powder Bed Fusion of Metals written by Igor Yadroitsev and published by Elsevier. This book was released on 2021-05-23 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser powder bed fusion of metals is a technology that makes use of a laser beam to selectively melt metal powder layer-by-layer in order to fabricate complex geometries in high performance materials. The technology is currently transforming aerospace and biomedical manufacturing and its adoption is widening into other industries as well, including automotive, energy, and traditional manufacturing. With an increase in design freedom brought to bear by additive manufacturing, new opportunities are emerging for designs not possible previously and in material systems that now provide sufficient performance to be qualified in end-use mission-critical applications. After decades of research and development, laser powder bed fusion is now enabling a new era of digitally driven manufacturing. Fundamentals of Laser Powder Bed Fusion of Metals will provide the fundamental principles in a broad range of topics relating to metal laser powder bed fusion. The target audience includes new users, focusing on graduate and undergraduate students; however, this book can also serve as a reference for experienced users as well, including senior researchers and engineers in industry. The current best practices are discussed in detail, as well as the limitations, challenges, and potential research and commercial opportunities moving forward. - Presents laser powder bed fusion fundamentals, as well as their inherent challenges - Provides an up-to-date summary of this advancing technology and its potential - Provides a comprehensive textbook for universities, as well as a reference for industry - Acts as quick-reference guide
Download or read book GB T 2017 GB 2017 Chinese National Standard PDF English Catalog year 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB, GB/T Series of year 2017.
Download or read book YS YS T YST Product Catalog Translated English of Chinese Standard YS YS T YST written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese Industry Standards - Category: YS; YS/T; YST.
Download or read book GB T 2022 GB 2022 Chinese National Standard PDF English Catalog year 2022 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-06-02 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB, GB/T Series of year 2022.
Download or read book Bureau of Mines Development of Titanium Production Technology written by Jack L. Henry and published by . This book was released on 1987 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Precision Metal Additive Manufacturing written by Richard Leach and published by CRC Press. This book was released on 2020-09-21 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) is a fast-growing sector with the ability to evoke a revolution in manufacturing due to its almost unlimited design freedom and its capability to produce personalised parts locally and with efficient material use. AM companies, however, still face technological challenges such as limited precision due to shrinkage, built-in stresses and limited process stability and robustness. Moreover, often post-processing is needed due to high roughness and remaining porosity. Qualified, trained personnel are also in short supply. In recent years, there have been dramatic improvements in AM design methods, process control, post-processing, material properties and material range. However, if AM is going to gain a significant market share, it must be developed into a true precision manufacturing method. The production of precision parts relies on three principles: Production is robust (i.e. all sensitive parameters can be controlled). Production is predictable (for example, the shrinkage that occurs is acceptable because it can be predicted and compensated in the design). Parts are measurable (as without metrology, accuracy, repeatability and quality assurance cannot be known). AM of metals is inherently a high-energy process with many sensitive and inter-related process parameters, making it susceptible to thermal distortions, defects and process drift. The complete modelling of these processes is beyond current computational power, and novel methods are needed to practicably predict performance and inform design. In addition, metal AM produces highly textured surfaces and complex surface features that stretch the limits of contemporary metrology. With so many factors to consider, there is a significant shortage of background material on how to inject precision into AM processes. Shortage in such material is an important barrier for a wider uptake of advanced manufacturing technologies, and a comprehensive book is thus needed. This book aims to inform the reader how to improve the precision of metal AM processes by tackling the three principles of robustness, predictability and metrology, and by developing computer-aided engineering methods that empower rather than limit AM design. Richard Leach is a professor in metrology at the University of Nottingham and heads up the Manufacturing Metrology Team. Prior to this position, he was at the National Physical Laboratory from 1990 to 2014. His primary love is instrument building, from concept to final installation, and his current interests are the dimensional measurement of precision and additive manufactured structures. His research themes include the measurement of surface topography, the development of methods for measuring 3D structures, the development of methods for controlling large surfaces to high resolution in industrial applications and the traceability of X-ray computed tomography. He is a leader of several professional societies and a visiting professor at Loughborough University and the Harbin Institute of Technology. Simone Carmignato is a professor in manufacturing engineering at the University of Padua. His main research activities are in the areas of precision manufacturing, dimensional metrology and industrial computed tomography. He is the author of books and hundreds of scientific papers, and he is an active member of leading technical and scientific societies. He has been chairman, organiser and keynote speaker for several international conferences, and received national and international awards, including the Taylor Medal from CIRP, the International Academy for Production Engineering.
Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.
Download or read book NBS Monograph written by and published by . This book was released on 1975 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
