Download or read book A Consumer s Guide to Archaeological Science written by Mary E. Malainey and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many archaeologists, as primarily social scientists, do not have a background in the natural sciences. This can pose a problem because they need to obtain chemical and physical analyses on samples to perform their research. This manual is an essential source of information for those students without a background in science, but also a comprehensive overview that those with some understanding of archaeological science will find useful. The manual provides readers with the knowledge to use archaeological science methods to the best advantage. It describes and explains the analytical techniques in a manner that the average archaeologist can understand, and outlines clearly the requirements, benefits, and limitations of each possible method of analysis, so that the researcher can make informed choices. The work includes specific information about a variety of dating techniques, provenance studies, isotope analysis as well as the analysis of organic (lipid and protein) residues and ancient DNA. Case studies illustrating applications of these approaches to most types of archaeological materials are presented and the instruments used to perform the analyses are described. Available destructive and non-destructive approaches are presented to help archaeologists select the most effective technique for gaining the target information from the sample. Readers will reach for this manual whenever they need to decide how to best analyze a sample, and how the analysis is performed.
Download or read book Handheld XRF in Cultural Heritage written by Aniko Bezur and published by . This book was released on 2019-05-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.
Download or read book Toxicological Profile for Tin and Compounds written by and published by . This book was released on 1992 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Mechanics of Solder Alloy Wetting and Spreading written by Michael Hosking and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1992 Congress passed the Defense Manufacturing Engineering Education Act with the intent of encouraging academic institutions to increase their emphasis on manufacturing curricula. The need for this incentive to integrate the academic and industrial communities was clear: gaps in manufacturing science were inhibiting the evolution of new manufacturing technologies that are required for the U.S. to maintain a competitive posture in the world marketplace. The Army Research Laboratory and Sandia National Laboratories sought to contribute to the congressional intent by initiating a new series of graduate level college textbooks. The goal was to focus next-generation scientists onto issues that were common to the needs of the commercial market, the affordability of DoD weapons systems, and the mobilization readiness of the U.S. Armed Forces. The textbook The Mechanics of Solder Wetting and Spreading was written in this spirit by nationally renowned scientists for academe and industry. Research ers using the book are encouraged to formulate programs that will establish scien tific correlations between manufacturing process controls and product reliability. Such correlations are essential to the building of a new electronics industry which is based upon the futuristic concepts of Virtual Factories, Prototyping, and Testing.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Isotopic Analysis written by Frank Vanhaecke and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by two very well-known and respected scientists in the field, this excellent practical guide is the first to cover the fundamentals and a wide range of applications, as well as showing readers how to efficiently use this increasingly important technique. From the contents: * The Isotopic Composition of the Elements * Single-Collector ICP-MS * Multi-Collector ICP-MS * Advances in Laser Ablation - Multi-Collector ICP-MS * Correction for Instrumental Mass Discrimination in Isotope Ratio Determination with Multi-Collector ICP-MS * Reference Materials in Isotopic Analysis * Quality Control in Isotope Ratio Applications * Determination of Trace Elements and Elemental Species Using Isotope Dilution ICP-MS * Geochronological Dating * Application of Multi-Collector ICP-MS to Isotopic Analysis in Cosmochemistry * Establishing the Basis for Using Stable Isotope Ratios of Metals as Paleoredox Proxies * Isotopes as Tracers of Elements Across the Geosphere-Biosphere Interface * Archaeometric Applications * Forensics Applications * Nuclear Applications * The Use of Stable Isotope Techniques for Studying Mineral and Trace Element Metabolism in Humans * Isotopic Analysis via Multi-Collector ICP-MS in Elemental Speciation A must-have for newcomers as well as established scientists seeking an overview of isotopic analysis via ICP-MS.
Download or read book Environmental Geochemistry of Potentially Toxic Metals written by Frederic R. Siegel and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Techniques for Corrosion Monitoring written by Lietai Yang and published by Woodhead Publishing. This book was released on 2020-12-21 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques for Corrosion Monitoring, Second Edition, reviews electrochemical techniques for corrosion monitoring, such as polarization techniques, potentiometric methods, electrochemical noise and harmonic analyses, galvanic sensors, differential flow through cells and multielectrode systems. Other sections analyze the physical or chemical methods of corrosion monitoring, including gravimetric, radioactive tracer, hydrogen permeation, electrical resistance and rotating cage techniques, and examine corrosion monitoring in special environments such as microbial systems, concrete and soil, and remote monitoring and model predictions. A final group of chapters case studies covering ways in which corrosion monitoring can be applied to engine exhaust systems, cooling water systems, and more. With its distinguished editor and international team of contributors, this book is a valuable reference guide for engineers and scientific and technical personnel who deal with corrosion in such areas as automotive engineering, power generation, water suppliers and the petrochemical industry. Provides an in-depth presentation of what current corrosion monitoring techniques are available Presents insights into how to choose the best technique(s) for specific corrosion monitoring needs Includes case studies that highlight the main issues Serves as a valuable reference guide for engineers and scientific and technical personnel who deal with corrosion
Download or read book Reverse Engineering written by Wego Wang and published by CRC Press. This book was released on 2010-09-16 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of reverse engineering has proven infinitely useful for analyzing Original Equipment Manufacturer (OEM) components to duplicate or repair them, or simply improve on their design. A guidebook to the rapid-fire changes in this area, Reverse Engineering: Technology of Reinvention introduces the fundamental principles, advanced methodologie
Download or read book Forensic Examination of Glass and Paint written by Brian Caddy and published by CRC Press. This book was released on 2001-08-23 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents an approach to the analysis of glass and paint as they occur as trace evidence in forensic cases. Each chapter is written by an expert in their particular area. The book is divided into two sections: one referring to paint and one referring to glass. Each section covers an introduction to the composition of these materials an
Download or read book Lead Free Electronics written by Edwin Bradley and published by John Wiley & Sons. This book was released on 2007-10-26 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the results of a more than two-year study, Lead-Free Electronics: iNEMI Projects Lead to Successful Manufacturing is the first practical, primary reference to cover Pb-free solder assembly as well as the analysis and reasoning behind the selection of Sn-Ag-Cu as the recommended Pb-free replacement for Sn-Pb. Reflecting the results of a two-year study, Lead-Free Electronics: iNEMI Projects Lead to Successful Manufacturing provides full coverage of the issues surrounding the implementation of Pb-free solder into electronic board assembly. This book is extremely timelyâ??most electronic manufacturers are going to change over to Pb free soldering by 2006 to meet new European laws. All manufacturers around the globe are going to be affected by this change. The text provides specific results from the thirty company NEMI project activities. It contains integrated and fully documented book chapters with references to existing published work in the area. These serve as tremendous resources for engineers and companies faced with making the switch to Pb-free solder assembly.
Download or read book Laser Induced Breakdown Spectroscopy written by Jagdish P. Singh and published by Elsevier. This book was released on 2020-06-02 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Induced Breakdown Spectroscopy, Second Edition, covers the basic principles and latest developments in instrumentation and applications of Laser Induced Breakdown Spectroscopy (LIBS). Written by active experts in the field, it serves as a useful resource for analytical chemists and spectroscopists, as well as graduate students and researchers engaged in the fields of combustion, environmental science, and planetary and space exploration. This fully revised second edition includes several new chapters on new LIBS techniques as well as several new applications, including flame and off-gas measurement, pharmaceutical samples, defense applications, carbon sequestration and site monitoring, handheld instruments, and more. LIBS has rapidly developed into a major analytical technology with the capability of detecting all chemical elements in a sample, of real- time response, and of close-contact or stand-off analysis of targets. It does not require any sample preparation, unlike conventional spectroscopic analytical techniques. Samples in the form of solids, liquids, gels, gases, plasmas, and biological materials (like teeth, leaves, or blood) can be studied with almost equal ease. This comprehensive reference introduces the topic to readers in a simple, direct, and accessible manner for easy comprehension and maximum utility. - Covers even more applications of LIBS beyond the first edition, including combustion, soil physics, environment, and life sciences - Includes new chapters on LIBS techniques that have emerged in the last several years, including Femtosecond LIBS and Molecular LIBS - Provides inspiration for future developments in this rapidly growing field in the concluding chapter
Download or read book Canmaking written by Terry A. Turner and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal protectin, including both metal treatments and coating systems. affords mutual protection for both can and contents. this book is the first reference to meld the knowledge of chemical companies and canmaking companies, covering materials and processes used in both protective and decorative aspects of metal packaging. Topics include basic substrates (aluminum and steel), demands of the markets served, basic metal-forming processes, and the specific decorative and protctive needs of different packaging types, with emphasis give to the technologies most likely to be used, such as ultraviolet curing. This practical reference gives readers a backround and familiarity with terminology and technology and gives insight into why certain technologies are used over others.
Download or read book New Technologies for Archaeology written by Markus Reindel and published by Springer Science & Business Media. This book was released on 2009-02-07 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This heavily-illustrated book covers recent developments in archaeometry and offers a multidisciplinary approach to reconstructing complex cultural histories. It also presents a detailed history of human development in South America’s Nasca region.
Download or read book A Handbook of Silicate Rock Analysis written by P.J. Potts and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: without an appreciation of what happens in between. The techniques available for the chemical analysis of silicate rocks have undergone a revolution over the last 30 years. However, to use an analytical technique most effectively, No longer is the analytical balance the only instrument used it is essential to understand its analytical characteristics, in for quantitative measurement, as it was in the days of classi particular the excitation mechanism and the response of the cal gravimetric procedures. A wide variety of instrumental signal detection system. In this book, these characteristics techniques is now commonly used for silicate rock analysis, have been described within a framework of practical ana lytical aplications, especially for the routine multi-element including some that incorporate excitation sources and detec tion systems that have been developed only in the last few analysis of silicate rocks. All analytical techniques available years. These instrumental developments now permit a wide for routine silicate rock analysis are discussed, including range of trace elements to be determined on a routine basis. some more specialized procedures. Sufficient detail is In parallel with these exciting advances, users have tended included to provide practitioners of geochemistry with a firm to become more remote from the data production process. base from which to assess current performance, and in some This is, in part, an inevitable result of the widespread intro cases, future developments.
Download or read book Hazardous Metals in the Environment written by M. Stoeppler and published by Elsevier. This book was released on 1992-04-13 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: The execution of detailed studies on the fate and levels of hazardous elements in the environment, foodstuffs and in human beings has become a major task in environmental research and especially in analytical chemistry. This has led to a demand to develop new methodology and optimize that already in use. The book offers the reader a general introduction to the problem areas that are currently being tackled, followed by chapters on sampling and sample preservation, strategies and applications of the archiving of selected representative specimens for long-term storage in environmental specimen banks. This is supplemented by the example of wine as a preserved - frequently, already historical - specimen which clearly reflects technological changes over time. The following chapters review sample treatment, present an overview on the most frequently and successfully applied trace analytical methods for metals and metal compounds, and introduce the increasingly important methods for identifying and quantifying metal species in sediments and soils (speciation). The chapters in the second part of the book provide data on analytical methods for determining the levels of toxicologically, ecotoxicologically and ecologically important elements in environmental and biological materials, including information on the separation and quantification of chemical and organomatallic species. The elements treated are aluminium, arsenic, cadmium, chromium, cobalt, lead, mercury, nickel, selenium and thallium. The final chapter treats quality assurance and the importance of the continuous use of appropriate reference materials to avoid erroneous results.
