Download or read book Mechanical Testing of Materials written by Emmanuel Gdoutos and published by Springer Nature. This book was released on 2024-01-19 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and in-depth exploration of the most widely used test methods for characterizing the deformation and failure behavior of materials. It presents a thorough treatise on mechanical testing, providing a valuable resource for researchers, engineers, and students seeking to understand the mechanical properties and performance of materials across various applications. The book is organized into ten chapters dedicated to specific test methods including tensile, compression, bending, torsion, multiaxial, indentation, fracture, fatigue, creep, high strain rates, nondestructive evaluation, ensuring a thorough examination of each technique's principles, procedures, and applications. It features two special chapters focusing specifically on the mechanical characterization of concrete and fiber composite materials. These chapters delve into the unique aspects and challenges associated with testing and analyzing these specific materials.
Download or read book The Design of Aircraft Landing Gear written by Robert Kyle Schmidt and published by SAE International. This book was released on 2021-02-18 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aircraft landing gear and its associated systems represent a compelling design challenge: simultaneously a system, a structure, and a machine, it supports the aircraft on the ground, absorbs landing and braking energy, permits maneuvering, and retracts to minimize aircraft drag. Yet, as it is not required during flight, it also represents dead weight and significant effort must be made to minimize its total mass. The Design of Aircraft Landing Gear, written by R. Kyle Schmidt, PE (B.A.Sc. - Mechanical Engineering, M.Sc. - Safety and Aircraft Accident Investigation, Chairman of the SAE A-5 Committee on Aircraft Landing Gear), is designed to guide the reader through the key principles of landing system design and to provide additional references when available. Many problems which must be confronted have already been addressed by others in the past, but the information is not known or shared, leading to the observation that there are few new problems, but many new people. The Design of Aircraft Landing Gear is intended to share much of the existing information and provide avenues for further exploration. The design of an aircraft and its associated systems, including the landing system, involves iterative loops as the impact of each modification to a system or component is evaluated against the whole. It is rare to find that the lightest possible landing gear represents the best solution for the aircraft: the lightest landing gear may require attachment structures which don't exist and which would require significant weight and compromise on the part of the airframe structure design. With those requirements and compromises in mind,The Design of Aircraft Landing Gear starts with the study of airfield compatibility, aircraft stability on the ground, the correct choice of tires, followed by discussion of brakes, wheels, and brake control systems. Various landing gear architectures are investigated together with the details of shock absorber designs. Retraction, kinematics, and mechanisms are studied as well as possible actuation approaches. Detailed information on the various hydraulic and electric services commonly found on aircraft, and system elements such as dressings, lighting, and steering are also reviewed. Detail design points, the process of analysis, and a review of the relevant requirements and regulations round out the book content. The Design of Aircraft Landing Gear is a landmark work in the industry, and a must-read for any engineer interested in updating specific skills and students preparing for an exciting career.
Download or read book NBS Special Publication written by and published by . This book was released on 1971 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Index of U S Voluntary Engineering Standards written by United States. National Bureau of Standards and published by . This book was released on 1971 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Index of U S Voluntary Engineering Standards written by William J. Slattery and published by . This book was released on 1971 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index of Specifications and Standards written by and published by . This book was released on 2005 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeronautical Applications of Non destructive Testing written by Abbas Fahr and published by DEStech Publications, Inc. This book was released on 2013-12-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive guide to the basic principles and applications of non-destructive testing methods for aircraft system and components: airframe, propulsion, landing gear and more Provides detailed analysis of the advantages and disadvantages of major NDT methods Important for design, inspection, maintenance, repair, corrosion protection and safety This critical book is among the first to provide a detailed assessment of non-destructive testing methods for the many materials and thousands of parts in aircraft. It describes a wide variety of NDT techniques and explains their application in the evaluation and inspection of aerospace materials and components ranging from the entire airframe to systems and subsystems. At the same time the book offers guidance on the information derived from each NDT method and its relation to aircraft design, repair, maintenance and overall safety. The book covers basic principles, as well as practical details of instrumentation, procedures and operational results with a full discussion of each method's capabilities and limitations as these pertain to aircraft inspection and different types of materials, e.g., composites and metal alloys. Technologies covered include: optical and enhanced optical methods; liquid penetrant, replication and magnetic particle inspection; electromagnetic and eddy current approaches; acoustics and ultrasonic techniques; infrared thermal imaging; and radiographic methods. A final section is devoted to NDT reliability and ways the probability of detection can be measured to establish inspection intervals.
Download or read book Department Of Defense Index of Specifications and Standards Federal Supply Class Listing FSC Part III September 2005 written by and published by DIANE Publishing. This book was released on with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Penetrant Testing Principles Techniques and Applications Interview Q A with Experts written by Chetan Singh and published by Chetan Singh. This book was released on with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Penetrant Testing: Principles, Techniques, and Applications - Interview Q&A with Experts" is a comprehensive guide that provides a detailed overview of the principles, techniques, and applications of liquid penetrant inspection (LPI) or dye penetrant testing (DPT) for detecting surface-breaking defects in materials. In addition to covering the fundamental concepts of penetrant testing, this book also features a series of exclusive interview Q&A sessions with leading experts in the field. The experts share their insights and experiences on a wide range of topics related to penetrant testing, such as best practices, emerging technologies, and industry applications. The NDT book is divided into several chapters that cover different aspects of penetrant testing, including the penetrant testing process, penetrant testing materials, surface preparation and test conditions, evaluation of indications, applications of penetrant testing, quality assurance and training, and future developments and emerging technologies. With its practical insights and detailed information, "NDT Penetrant Testing: Principles, Techniques, and Applications - Interview Q&A with Experts" is an indispensable resource for engineers, technicians, inspectors, and anyone who is involved in non-destructive testing (NDT) and quality control.
Download or read book Testing of Materials written by Vernon John and published by . This book was released on 1992 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
Download or read book Annual Book of ASTM Standards written by ASTM International and published by . This book was released on 2004 with total page 1590 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quality Technology Handbook written by R S Sharpe and published by Butterworth-Heinemann. This book was released on 2017-03-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality Technology Handbook, Fourth Edition offers a wide discussion on technology and its related subtopics. After giving some information on its background, content, and authors, the book then informs the readers about the quality problem check-list and enumerates the questions one has to ask to ensure that a problem will be solved. This part is followed by a discussion on non-destructive testing (NDT) and the several committees formed for it, among which are the British National Committee and the Harwell NDT Center. The book also includes information on two organizations that are closely related to the topic, the Institute of Quality Assurance (IQA) and The Welding Institute (TWI). A directory of international organizations related to quality assurance and non-destructive testing is provided in the latter part of the text. The book serves as valuable reference to undergraduates or postgraduates of courses that are related to science and technology.
Download or read book Tax Reform Act of 1969 written by United States. Congress. Senate. Committee on Finance and published by . This book was released on 1969 with total page 1808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hearings Reports and Prints of the Senate Committee on Finance written by United States. Congress. Senate. Committee on Finance and published by . This book was released on 1969 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Castings Handbook 6th Edition written by Malcolm Blair and published by ASM International. This book was released on 1995-01-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Book of ASTM Standards written by American Society for Testing and Materials and published by . This book was released on 2007 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
